J73 制冷设备 标准查询与下载

ISO 5149-3:2014 制冷系统和热泵. 安全与环境要求. 第3部分: 安装地点

This part of ISO 5149 is applicable to the installation site (plant space and services). It specifies requirements for the site for safety, which could be needed because of, but not directly connected with, the refrigerating system and its ancillary components. This part of ISO 5149 is applicable to new refrigerating systems, extensions or modifications of existing systems, and for used systems being transferred to and operated on another site. This part of ISO 5149 also applies in the case of the conversion of a system for another refrigerant.

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site

ISO 5149-2:2014 制冷系统和热泵. 安全与环境要求. 第2部分: 设计, 建设, 试验, 标记和文档

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation

KS B ISO 23953-1:2014 冷藏陈列柜.第1部分:用语

이 표준은 식료품을 판매하거나 전시하기 위해 사용하는 냉동냉장 진열장에 관련되는 용어와 정의에대해 규정한다. 이 표준은 냉장 자동 판매기 또는 음식물, 기타 유사한 비-소매용 진열장은 적용하지않는다.

Refrigerated display cabinets ― Part 1: Vocabulary

KS B ISO 23953-2:2014 冷藏陈列柜.第2部分:分类、要求事项及实验条件

이 표준은 식료품의 판매, 전시에 사용되는 냉동냉장 진열장의 구조, 특성 및 성능 요구사항을 규정한다. 시험 조건과 요구사항을 충족하는지에 대한 검사 방법, 진열장의 분류 및 제조자가 명시하여야하는 특정사항과 표시사항에 대하여 규정한다. 이는 냉장 자판기, 케이터링(catering) 또는 판매 목적이 아닌 진열장에는 적용되지 않는다. 또한 진열장에 진열하는 식료품의 종류 선택 여부는 다루지않는다.

Refrigerated display cabinets ― Part 2: Classification, requirements and test conditions

GOST 32968-2014 制冷装置. 制冷剂. 应用和提取要求

Refrigeration equipment. Refrigerants. Requirements for application and extraction

JB/T 9062-2013 采暖通风与空气调节设备 涂装要求

本标准规定了采暖通风与空气调节设备(以下简称“设备”)涂装的术语和定义、涂装方式、要求、试验和检验规则。本标准适用于采暖通风与空气调节设备的涂装。本标准不适用于散热器、除尘设备的涂装。

The painting requirements for heating ventilation and air-conditioning equipments

NF E35-413:2013 冷却系统和热力泵.减压装置及其相关的管道.计算方法

Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation

SB/T 11041-2013 家用和类似用途电器的安全商用制冰机的特殊要求　

GB 4706.1-2005中的该章用下述内容代替:本标准涉及单相器具额定电压不超过250 V,其他器具不超过480 V的下述器具的安全。--日产冰量大于15 kg,且不超过2 000 kg的商用自动制冰机;--自携压缩冷凝机组或以两个单元的形式提供可按照制造商说明组装成单一器具(分体系统)的电动商用制冷制冰机。本标准同样也适用于使用可燃制冷剂的压缩式器具。只要适用,本标准还涉及这类器具所共有的危险。本标准不包括制冷器具的结构和工作特性,该部分内容在ISO标准中涉及。

Safety of household and similar electrical appliances.Particular requirements for commercial ice machines

UL 207 CRD-2013 含制冷剂的非电气元件和组件的UL安全标准. 节/段落参考: 12.1.2, 12.1.2.1, 12.1.4 - 12.1.6, 22.11主题: 修订以允许基于降低的试验压力的某些高边组件 (第八版: 2009年4月20日)

UL Standard for Safety Refrigerant-Containing Components and Accessories@ Nonelectrical - Section / Paragraph Reference: 12.1.2@ 12.1.2.1@ 12.1.4 �C 12.1.6@ 22.11 Subject: Revisions to Permit Certain High-Side Components Based on a Reduced Test Pressure (

BS EN ISO 17249:2013 耐链锯锯割的防护鞋

Safety footwear with resistance to chain saw cutting

BS EN 14825:2013 空间加热和制冷用空调,带电动压缩机的液体冷却封装和热泵.季节性性能的部分负荷状态和计算试验和等级

Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling. Testing and rating at part load conditions and calculation of seasonal performance

BS EN 15218:2013 空间冷却用带蒸汽冷凝器和电驱动压缩机的空气调节装置和液态制冷包.术语、定义、试验条件、试验方法和要求

Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling. Terms, definitions, test conditions test methods and requirements

BS EN 12900:2013 制冷压缩机. 额定条件. 公差和制造商提供的性能数据

Refrigerant compressors. Rating conditions, tolerances and presentation of manufacturer's performance data

BS EN 14511-2:2013 空间加热和制冷用带电驱动压缩机的空调、液体冷却包和热泵.试验条件

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Test conditions

IEC 60598-2-11:2013 灯具.第2-11部分:详细要求.鱼缸用灯具

This part of the IEC 60598 series specifies requirements for household aquarium luminaires incorporating electric light sources on supply voltages not exceeding 1 000 V. NOTE In the U.S., electrical equipment used on or in aquariums must be supplied by voltages not exceeding 300 V.

Luminaires.Part 2-11: Particular requirements.Aquarium luminaires

JB/T 3548-2013 制冷用热力膨胀阀

本标准规定了制冷用热力膨胀阀(以下简称"膨胀阀")的术语和定义,型式和基本参数,要求,试验,检验规则,标志、包装、运输和贮存等、本标准适用于蒸发温度为-60℃~15℃,制冷剂为R22、R134a、R404A、R407C、R410A、R507、R290、R32和R23的制冷用热力膨胀阀、使用其他制冷剂的制冷用热力膨胀阀可参照执行、本标准不适用于汽车空调用热力膨胀阀、

Thermostatic refrigerant expansion valves

JB/T 4119-2013 制冷用电磁阀

本标准规定了制冷用电磁阀(以下简称“电磁阀”)的术语和定义，型式、型号和基本参数，要求，试验方法，检验规则，标志、包装、运输和贮存。本标准适用于制冷工质以R22、R134a、R404A、R407C、R410A为制冷剂的液管、高低压蒸气管路用公称通径不大于40 mm的电磁阀，使用其他制冷剂的电磁阀可参照使用。

Solenoid valve for refrigerantion equipment

JB/T 11530-2013 制冷用闭式冷却塔

本标准规定了制冷用闭式冷却塔(以下简称“冷却塔”)的术语和定义、型式与基本参数、要求、试验方法、检验规则及标志、包装、运输和贮存等。本标准适用于设计压力小于等于2.5 MPa的制冷用闭式冷却塔。

Closed circuit cooling tower for refrigeration

JB/T 7659.1-2013 氟代烃类制冷装置用辅助设备 第1部分：贮液器

JB/T 7659的本部分规定了氟代烃类制冷装置用贮液器(以下简称“贮液器”)的型式与基本参数、要求、试验方法、检验规则、标志、包装和运输。本部分适用于R22、R123、R134a、R404A、R407C、R410A为制冷剂、单独供应的设计压力不大于4.0 MPa、内直径不小于150 mm且容积不小于0.025 m3的贮液器。使用其他制冷剂或内直径小于150 mm且容积小于0.025 m3的贮液器可参照执行。

Accessorial equipment for freon refrigerant equipment.Part 1:Accumulator

JB/T 7659.4-2013 氟代烃类制冷装置用辅助设备 第4部分：翅片式换热器

JB/T 7659的本部分规定了氟代烃类制冷装置用翅片式换热器(以下简称“换热器”)，其中包括翅片式蒸发器(以下简称“蒸发器”)和翅片式冷凝器(以下简称“冷凝器”)的型式和基本参数、要求、试验方法、检验规则、标志、包装及贮存。本部分适用于以R22、R134a、R404A、R407C、R410A为制冷剂的制冷与空调装置用翅片式换热器。其他制冷剂的翅片式换热器可参照执行。

Accessorial equipment for freon refrigerant equipment.Part 4: Fin type heat exchanger