L13 电阻器 标准查询与下载

DLA QPL-12934-51-2005 线绕式可变电阻器精度.一般规格

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

RESISTOR, VARIABLE, WIRE WOUND, PRECISION, GENERAL SPECIFICATION FOR

NF C83-240:2005 分规范:低功率表面安装的固定电阻器

Sectional specification : fixed low power surface mount (SMD) resistors.

NF C83-241-803/A1:2005 详细规范.低功率非线绕表面安装的固定电阻器.圆柱形.稳定性级别0.05、0.1、0.25、0.5、1和2

Detail specification : fixed low power non wire-wound surface mount (SMD) resistors - Cylindrical - Stability classes 0,05, 0,1, 0,25, 0,5, 1, 2.

DIN EN 140402-801:2005 详细规范:固定低功率线绕表面安装(SMD)电阻器.矩形.稳定性等级0.5、1、2

This blank detail specification is a supplementary document of the Sectional Specification and contains requirements for style and layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as beeing in accordance with CECC not shall they to be described.

Detail specification: Fixed low power wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2; German version EN 140402-801:2005

KS C IEC 61045-2-1:2005 电子设备用膜固定电阻网络.第2-1部分:按能力批准程序评定质量的膜电阻网络空白详细规范.评定水平E

서 문 이 규격은 1991년 초판으로 발행된 IEC 61045-2-1 Fixed fi

Fixed film resistor networks for use in electronic equipment-Part 2:Blank detail specification for film resistor networks of assessed quality on the basis of the capability approval procedure. Assessment level E

KS C IEC 61045-1:2005 电子设备用膜固定电阻网络.第1部分:总规范

이 규격은 전자 기기용 피막 고정 네트워크 저항기에 적용한다.

Fixed film resistor netwoks for use in electronic equipment-Part 1:Generic specification

KS C IEC 61045-2:2005 电子设备用膜固定电阻网络.第2部分:按能力批准程序评定质量的膜电阻网络分规范

이 규격은 피막 고정 네트워크 저항기에 적용된다. 저항기 소자들은 회로 구성에서 개별적으로

Fixed film resistor networks for use in electronic equipment-Part 2:Sectional specification for film resistor networks of assessed quality on the basis of the capability approval procedure

ARMY QPL-39007-95-2005 一般规格有既定可靠性和非既定可靠性和空间层次(机动式)绕丝固定电阻器

This commercial item description covers brown kraft paper used for general wrapping applications.

RESISTORS, FIXED, WIRE WOUND (POWER TYPE), NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, AND SPACE LEVEL, GENERAL SPECIFICATION FOR

ARMY QPL-39017-84-2005 一般规格的有既定可靠性和非既定可靠性(隔热)涂膜固定电阻器

This commercial item description covers brown kraft paper used for general wrapping applications.

RESISTORS, FIXED, FILM (INSULATED), NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

NF C83-241-803:2005 详细规范:低功率非线绕表面安装的固定电阻器.圆柱形.0.05、0.1、0.25、0.5、1和2级别的稳定性

Detail specification : fixed low power non wire-wound surface mount (SMD) resistors - Cylindrical - Stability classes 0,05 - 0,1 - 0,25 - 0,5 - 1 - 2.

DLA QPL-22684-76-2005 固定电阻器的(隔热)薄膜.一般规格

This list has been prepared for use by or for the Government in the acquisition of products covered by Specification MIL-PRF-22684. Listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.

RESISTORS, FIXED, FILM (INSULATED), GENERAL SPECIFICATION FOR

DLA QPL-10509-159-2005 (高稳定性)固定电阻器薄膜.一般规格

This list has been prepared for use by or for the Government in the acquisition of products covered by Specification MIL-R-10509. Listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.

RESISTORS, FIXED, FILM, (HIGH STABILITY) GENERAL SPECIFICATION FOR

DLA QPL-18546-70-2005 线绕式(电力型底盘安装)固定电阻器.一般规格

This list has been prepared for use by or for the Government in the acquisition of products covered by Specification MIL-PRF-18546. Listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.

RESISTORS, FIXED, WIRE-WOUND (POWER TYPE, CHASSIS MOUNTED), GENERAL SPECIFICATION FOR

NF C83-241-804:2005 详细规范:固定式低功率绕组线表面安装电阻器.矩形.稳定性等级0.1, 0.25

Detail specification : fixed low power non wire-wound high stability surface mount (SMD) resistors - Rectangular - Stability classes 0,1, 0,25.

NF C82-242-801:2005 详细规范:固定式低功率绕组线表面安装电阻器.矩形.稳定性等级0.5, 1, 2

Detail specification : fixed low power wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,5, 1, 2.

DLA DSCC-DWG-87025 REV F-2005 双列直插式封装8引脚的电阻网络

This drawing describes the requirements for an 8 pin,resistor network.

RESISTOR NETWORK, 8 PIN, DUAL-IN-LINE PACKAGE (DIP)

DLA QPL-39023-22-2005 无线绕精度可变电阻器一般规格

This list has been prepared for use by or for the Government in the acquisition of products covered by Specification MIL-PRF-39023. Listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the supplier from compliance with the specification requirements.

RESISTORS, VARIABLE, NONWIRE WOUND, PRECISION, GENERAL SPECIFICATION FOR

DLA A-A-59769-2005 终止程序线团阵列电阻网 一般要求

This CID covers the general requirements for a resistor network, ball grid array terminator. These resistors networks provide series and parallel termination between the source and the receiver. Requirements for specific resistor networks are covered in the individual CID sheets. The resistor networks covered by this CID are intended for commercial/industrial applications.

RESISTOR NETWORKS, BALL GRID ARRAY TERMINATORS GENERAL REQUIREMENTS FOR

DLA DSCC-DWG-88014 REV C-2005 12引脚单列直插式封装电阻网络

This drawing describes the requirements for a 12 pin, single-in-line package (SIP), resistor network.

RESISTOR, NETWORK, 12-PIN, SINGLE-IN-LINE PACKAGE (SIP)

ARMY QPL-39009-39-2005 一般规格有既定可靠性和非既定可靠性(机动式.有底盘)绕丝固定电阻器

This list has been prepared for use by or for the Government in the actheof products covered by Specification MIL-PRF-39009. Listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the supplier from compliance with the specification requirements.

RESISTORS, FIXED, WIRE-WOUND (POWER TYPE, CHASSIS MOUNTED), NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR