N20 电工仪器、仪表综合 标准查询与下载

IEC TR 61010-3-045:2003 测量、控制及实验室用电气设备的安全要求.第3-045部分:IEC 61010-2-045:2000的一致性鉴定报告.医疗、药业、兽医和实验室用垫圈消毒器具的特殊要求

This report is a Technical Report and is of a purely informative nature and is therefore by itself not to be regarded as an International Standard. It is for use by users to assist them with determining and recording verification of conformity of the equ

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-045: Conformity verification report for IEC 61010-2-045:2000; Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary an

IEC TR 61010-3-101:2003 测量、控制及实验室用电气设备的安全要求.第3-101部分:IEC 61010-2-101:2002的一致性鉴定报告.实验室条件下诊断医疗设备的特殊要求

This report is a Technical Report and is of a purely informative nature and is therefore by itself not to be regarded as an International Standard. It is to assist users of the standard with determining and recording verification of conformity of the equ

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-101: Conformity verification report for IEC 61010-2-101:2002; Particular requirements for in vitro diagnostic (IVD) medical equipment

IEC TR 61010-3-1:2003 测量、控制及实验室用电气设备的安全要求.第3-1部分:IEC 61010-1:2001的一致性鉴定报告.一般要求

This report is a Technical Report and is of a purely informative nature and is therefore by itself not to be regarded as an International Standard. It is to assist users of the standard with determining and recording verification of conformity of the equ

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-1: Conformity verification report for IEC 61010-1:2001; General requirements

IEC TR 61010-3-081:2003 测量、控制及实验室用电气设备的安全要求.第3-081部分:IEC 61010-2-081:2001的一致性鉴定报告.分析和其他用途用自动和半自动实验室设备的特殊要求

This report is a Technical Report and is of a purely informative nature and is therefore by itself not to be regarded as an International Standard. It is to assist users of the standard with determining and recording verification of conformity of the equ

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-081: Conformity verification report for IEC 61010-2-081:2001; Particular requirements for automatic and semi-automatic laboratory equipment for analysis and

IEC 61010-1/COR2:2003 测量、控制和实验室用电气设备的安全要求.第1部分:一般要求

This standard is about Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements; Corrigendum 1

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements

IEC TR 61010-3-031:2003 测量、控制及实验室用电气设备的安全要求.第3-031部分:IEC 61010-1:2002的一致性验证报告.电气试验和测量用手持式探测装置的安全要求

This report is for use by test houses and other users to assist them with determining and recording verification of conformity of the equipment under test with the requirements of IEC 61010-031:2002.

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-031: Conformity verification report for IEC 61010-031:2002; Safety requirements for hand-held probe assemblies for electrical test and measurement

IEC TR 61010-3:2003 测量、控制及实验室用电气设备的安全要求.第3部分:IEC 61010第2版系列标准的一致性鉴定报告的编写协议

This part of IEC 61010 is a technical report, which provides a test protocol to assist with determining and recording verification of conformity of the equipment under test with the reference documents identified on the front cover of the appropriate rep

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3: Protocol for the preparation of conformity verification reports for the IEC 61010 2nd edition series

NF C30-400:2003 地下管道和电缆用电磁定位器.性能和安全性

Electromagnetic locators for buried pipes and cables - Performance and safety.

NF C42-739:2003 测量、控制和试验室用电气设备的安全要求.第2-101部分:试验室诊断(IVD)医疗设备的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-101 : particular requirements for in vitro diagnostic (IVD) medical equipment.

NF C42-715:2003 测量、控制和试验室用电气设备的安全要求.第2-032部分:电气测量和试验用手持和手控电流感应器的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032 : particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement.

DIN EN 50249:2003 地下管道和电缆电磁波监测器.性能和安全性

Electromagnetic locators for buried pipes and cables - Performance and safety; German version EN 50249:2002

UL 61010B-1-2003 电气测量和试验设备.第1部分:一般要求

1．1 Scope This International Standard specifies general safety professional，industrial process，and educational use measu rement and test requirements for electrical equipment intended for including equipment and computing devices for： control， laboratory use； accessories intended for use with the above(e g sample handling equipment This Part 1 of the standard applies to the equipment defined in a)to c)below，when used under the environmental conditions of 1 4 a)Electrical measurement and test equipment This is equipment which by electrical means measu res，indicates or records one or more electrical or non-electrical quantities，also non-measu ring equipment such as signal generators measu rement standards，power supplies，transducers，transmitters，etc NOTE—All indicating and recording electrical measuring instruments(except those excluded in 1．1．2) fall within the scope of this standard unless they are panel meters designed only for building-in to other equipment．Built-in panel meters are considered as components and only need to meet the relevant requirements of IEC 1010，or other standards，as part of the equipment into which they are built b)Electrical control equipment This is equipment which controls one or more output quantities to specific values，with each value determined by manual setting，by local or remote programming，or by one or more input variables c)Electrical laboratory equipment This is equipment which measures，indicates，monitors or analyses substances，or is used to prepare materials This equipment may also be used in areas other than laboratories 1．1DV．1 DE Modification Delete”industrial process”and delete the second and third dashes frOm the fi rst paragraph fUL 61010A-1 and UL 61010C-1 apply)． Copyright．by the UndenrriLers LaboraLories]nc

UL Standard for Safety Electrical Measuring and Test Equipment; Part 1: General Requirements First Edition

BS EN 61010-2-032:2002 测量、控制和试验室用电气设备的安全要求.电气测量和试验用手持和手控电流感应器的特殊要求

To be read in conjunction with BS EN 61010-1:2001

Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement

BS EN 61010-2-032:2003 测量、控制和试验室用电气设备的安全要求.电气测量和试验用手持和手控电流感应器的特殊要求

To be read in conjunction with BS EN 61010-1:2001

Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement

JJG 982-2003 电流电阻箱检定规程

Verification Regulation of D.C.Resistance Box

JJG 837-2003 直流低电阻表检定规程

Verification Regulation of DC Low Resistance Meters

JJG 690-2003 高绝缘电阻测量仪(高阻计)检定规程

Verification Regulation of High Insulation Resistance Meters

BS EN 61010-2-101:2002 测量、控制和实验室用电气设备的安全要求.实验室诊断(IVD)医疗设备的特殊要求

Replacement: This part 2 applies to equipment intended for in vitro diagnostic (IVD) medical purposes, including self-test IVD medical purposes. IVD medical equipment, whether used alone or in combination, is intended by the manufacturer to be used in vitro for the examination of specimens, including blood and tissue samples, derived from the human body, solely or principally for the purpose of providing information concerning one or more of the following:  a physiological or pathological state; or  a congenital abnormality;  the determination of safety and compatibility with potential recipients;  the monitoring of therapeutic measures. Self-test IVD medical equipment is intended by the manufacturer for use by lay persons in a home environment. NOTE If all or part of the equipment falls within the scope of one or more other part 2 standards of IEC 61010 as well as within the scope of this standard, it will also need to meet the requirements of those other part 2 standards.

Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for in vitro diagnostic (IVD) medical equipment

KS C IEC 61010-2-42:2002 测量、控制和实验室用电气设备的安全要求.第2-42部分:医疗材料处理与实验室加工用有毒气体高压杀菌器的特殊要求

교 체이 규격은 자동 부하 싣기와 부리기 시스템이 있는 것을 포함하며, 의료 물질

Safety requipements for electrical equipment for measurement, control, and laboratory use-Part 2-42:Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials and for laboratory processes

KS C IEC 61010-2-43:2002 测量、控制和实验室用电气设备的安全要求.第2-43部分:医疗材料处理与实验室加工用高温空气与高温惰性气体干热杀菌器的特殊要求

교 체 이 규격은 자동 부하 싣기와 부리기 시스템이 있는 것을 포함하여 의료 물질

Safety requipements for electrical equipment for measurement, control, and laboratory use-Part 2-43:Particular requirements for dry heat sterilizers using either hot air or hot inert gas for the treatment of medicals materials, and for laboratory processe