N20 电工仪器、仪表综合 标准查询与下载

PD IEC TR 61010-3-032:2002 测量、控制和实验室用电气设备的安全要求.IEC 61010-2-032:1994<电气测量和试验用手持式电流夹的特殊要求>的一致性验证报告

Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-032:1994. Particular requirements for hand-held current clamps for electrical measurement and test

PD IEC TR 61010-3-043:2002 测量、控制和实验室用电气设备的安全要求.IEC 61010-2-043:1997<医疗材料处理和实验室试验用热空气或热惰性气体干加热消毒器的特殊要求>的符合性验证报告

Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-043:1997. Particular requirements for dry heat sterilizers using either hot air or hot inert gas for treatment of med

IEC 61010-2-101:2002 测量、控制和实验室用电气设备的安全要求.第2-101部分:实验室诊断(IVD)医疗设备的特殊要求

Replacement: This part 2 applies to equipment intended for in vitro diagnostic (IVD) medical purposes, including self-test IVD medical purposes. IVD medical equipment, whether used alone or in combination, is intended by the manufacturer to be used in vitro for the examination of specimens, including blood and tissue samples, derived from the human body, solely or principally for the purpose of providing information concerning one or more of the following: · a physiological or pathological state; or · a congenital abnormality; · the determination of safety and compatibility with potential recipients; · the monitoring of therapeutic measures. Self-test IVD medical equipment is intended by the manufacturer for use by lay persons in a home environment. NOTE If all or part of the equipment falls within the scope of one or more other part 2 standards of IEC 61010 as well as within the scope of this standard, it will also need to meet the requirements of those other part 2 standards. 2 Equipment excluded from scope Addition: Add the following second paragraph: Products for general laboratory use are not IVD medical devices unless such products, in view of their characteristics, are specifically intended by their manufacturer to be used for in vitro diagnostic examination.

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment

IEC TR 62059-11:2002 电量计量设备.可靠性.第11部分:一般概念

This part of IEC 62059 covers general aspects of the dependability of static metering equipment for electrical energy measurement and load control. It contains information on the role in dependability management of the various parties involved and on the methods applicable during the whole life cycle.

Electricity metering equipment - Dependability - Part 11: General concepts

KS C 1217-2001 心电图检查设备

이 규격은 주로 심박 리듬을 검출하여 이상을 파악하기 위하여 심전도를 장시간에 걸쳐 감시하

Electrocardiographic monitoring equipment

NF C01-551-20:2001 电工词汇.第551-20部分:动力电子学.谐波分析

Electrotechnical Vocabulary - Part 551-20 : power electronics - Harmonic analysis.

NF C42-360/A2:2001 交流电量转换为模拟或数字信号用电测量换能器

Electrical measuring transducers for converting a.c. electrical quantities to analogue or digital signals.

NF C01-300:2001 电工词汇.电气和电子测量方法和测量仪器.第311部分:与测量有关的一般术语.第312部分:与电气测量有关的一般术语.第313部分:电气测量仪器的类型.第314部分:与仪器类型有关的特定术语

Electrotechnical Vocabulary - Electrical and electronic measurements and measuring instruments - Part 311 : general terms relating to measurements - Part 312 : general terms relating to electrical measurements - Part 313 : types of electrical measuring in

IEC 61010-2-081:2001 测量、控制和实验室用电气设备的安全要求 第2-081部分：分析和其他用途的自动及半自动实验室设备的特殊要求

Replacement: This part 2 applies to automatic and semi-automatic laboratory equipment for analysis and other purposes. Automatic and semi-automatic laboratory equipment consists of instruments or systems for measuring or modifying one or more characteristics or parameters of samples, performing the complete process or parts of the process without manual intervention. Equipment forming part of such a system is within the scope of this standard. Examples of equipment within the scope of this standard include: · analytical equipment; · automatic sampler (pipettor, aliquoter); · equipment for sample replication and amplification. NOTE 1 In the case of analytical equipment the complete process usually includes the following steps: · taking a specific quantity of the sample; · preparing the sample by chemical, thermal, mechanical or other means; · measurement; · display, transmission or printing of the results of measurement. NOTE 2 If all or part of the equipment falls within the scope of one or more other part 2 standards of IEC 61010 as well as within the scope of this standard, it will also need to meet the requirements of those other parts 2 standards.

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes

NF C42-544-2/A1:2001 变换器.第2部分:感应式变压器

Instrument transformers - Part 2 : inductive voltage transformers.

NF C42-544-1/A1:2001 仪表用变压器.第1部分:电流变压器

Instrument transformers - Part 1 : current transformers.

BS IEC 60736:2001 电子能量计的试验设备

Applicable to three-phase and/or single-phase equipment used for type and acceptance testing of electrical energy meters of classes 0.5, 1 and 2. Gives units and definitions, specifies requirements of accuracy and describes the testing procedure and dielectric properties. Appendixes give notes concerning testing equipment, error definitions, basic quantities, accuracy and error determination and guidelines for the initial checking of a new meter testing equipment.

Testing equipment for electrical energy meters

BS EN 61010-1:2001 测量、控制和实验室用电气设备安全性要求.一般要求

1 Equipment included in scope This part of IEC 61010 specifies general safety requirements for electrical equipment intended for professional, industrial process, and educational use, any of which may incorporate computing devices, as defined in a) to d) below, when used under the environmental conditions of 1.4. a) Electrical test and measurement equipment This is equipment which by electrical means tests, measures, indicates or records one or more electrical or non-electrical quantities, also non-measuring equipment such as signal generators, measurement standards, power supplies, transducers, transmitters, etc. NOTE All indicating and recording electrical measuring instruments (except those excluded in 1.1.2) fall within the scope of IEC 61010 unless they are panel meters designed only for building-in to other equipment. Built-in panel meters are considered to be components and only need to meet the relevant requirements of IEC 61010, or other standards, as part of the equipment into which they are built. b) Electrical control equipment This is equipment which controls one or more output quantities to specific values, with each value determined by manual setting, by local or remote programming, or by one or more input variables. c) Electrical laboratory equipment This is equipment which measures, indicates, monitors or analyses substances, or is used to prepare materials, and includes in vitro diagnostic (IVD) equipment This equipment may also be used in areas other than laboratories, for example self-test IVD equipment may be used in the home. d) Accessories intended for use with the above (for example, sample handling equipment). 2 Equipment excluded from scope This standard does not apply to equipment within the scope of a) IEC 60065 (Safety requirements for audio, video and similar electronic apparatus); b) IEC 60204 (Controls for electrical machines); c) IEC 60335 (Safety of household and similar electrical appliances); d) IEC 60364 (Electrical installations of buildings); e) IEC 60439-1 (Low-voltage switchgear and controlgear assemblies); f) IEC 60521 (Class 0,5; 1 and 2 alternating current watthour meters); g) IEC 60601 (Medical electrical equipment); h) IEC 60950 (Safety of information technology equipment including electrical business equipment, except as specified in 1.1.3); i) IEC 61558 (Power transformers, power supply units and similar). 3 Computing equipment This standard applies only to computers, processors, etc. which form part of equipment within the scope of this standard or are designed for use exclusively with the equipment. NOTE Computing devices and similar equipment within the scope of IEC 60950 and conforming to its requirements are considered to be suitable for use with equipment within the scope of this standard. However, some of the requirements of IEC 60950 for resistance to moisture and liquids are less stringent than those in this standard. If HAZARDS from moisture or liquids could affect equipment that conforms to IEC 60950 and is used with equipment which conforms to this standard, the instructions for use should specify any additional precautions required.

Safety requirements for electrical equipment for measurement, control and laboratory use - General requirements

IEC 60688/AMD2:2001 将交流电量转换成模拟信号或数字信号用的电测量变送器 修改2

This is Amendment 2 to IEC 60688-1992 (Electrical measuring transducers for converting a.c. electrical quantities to analogue or digital signals)

Electrical measuring transducers for converting a.c. electrical quantities to analogue or digital signals; Amendment 2

NF C42-728:2001 测量、控制和试验室用电气设备的安全要求.第2-045部分:医疗、制药和试验室领域用洗涤设备消毒器具的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-045 : particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields.

IEC 61010-1:2001 测量、控制和实验室用电气设备的安全要求 第1部分：一般要求

1 Equipment included in scope This part of IEC 61010 specifies general safety requirements for electrical equipment intended for professional, industrial process, and educational use, any of which may incorporate computing devices, as defined in a) to d) below, when used under the environmental conditions of 1.4. a) Electrical test and measurement equipment This is equipment which by electrical means tests, measures, indicates or records one or more electrical or non-electrical quantities, also non-measuring equipment such as signal generators, measurement standards, power supplies, transducers, transmitters, etc. NOTE All indicating and recording electrical measuring instruments (except those excluded in 1.1.2) fall within the scope of IEC 61010 unless they are panel meters designed only for building-in to other equipment. Built-in panel meters are considered to be components and only need to meet the relevant requirements of IEC 61010, or other standards, as part of the equipment into which they are built. b) Electrical control equipment This is equipment which controls one or more output quantities to specific values, with each value determined by manual setting, by local or remote programming, or by one or more input variables. c) Electrical laboratory equipment This is equipment which measures, indicates, monitors or analyses substances, or is used to prepare materials, and includes in vitro diagnostic (IVD) equipment This equipment may also be used in areas other than laboratories, for example self-test IVD equipment may be used in the home. d) Accessories intended for use with the above (for example, sample handling equipment). 2 Equipment excluded from scope This standard does not apply to equipment within the scope of a) IEC 60065 (Safety requirements for audio, video and similar electronic apparatus); b) IEC 60204 (Controls for electrical machines); c) IEC 60335 (Safety of household and similar electrical appliances); d) IEC 60364 (Electrical installations of buildings); e) IEC 60439-1 (Low-voltage switchgear and controlgear assemblies); f) IEC 60521 (Class 0,5; 1 and 2 alternating current watthour meters); g) IEC 60601 (Medical electrical equipment); h) IEC 60950 (Safety of information technology equipment including electrical business equipment, except as specified in 1.1.3); i) IEC 61558 (Power transformers, power supply units and similar). 3 Computing equipment This standard applies only to computers, processors, etc. which form part of equipment within the scope of this standard or are designed for use exclusively with the equipment. NOTE Computing devices and similar equipment within the scope of IEC 60950 and conforming to its requirements are considered to be suitable for use with equipment within the scope of this standard. However, some of the requirements of IEC 60950 for resistance to moisture and liquids are less stringent than those in this standard. If hazards from moisture or liquids could affect equipment that conforms to IEC 60950 and is used with equipment which conforms to this standard, the instructions for use should specify any additional precautions required.

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements

NF C42-544-1:2000 仪表用互感器.第1部分:电流互感器

Instrument transformers - Part 1 : current transformers.

NF C42-544-2:2000 仪表用互感器.第2部分:感应电压互感器

Instrument transformers - Part 2 : inductive voltage transformers.

UL 1244-2000 电气和电子测量与试验设备

Electrical and electronic measuring and testing equipment

IEC 61010-2-045:2000 测量、控制和实验室用电气设备的安全要求 第2-045部分:医疗、制药、兽医和实验室用洗涤器消毒器的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-045: Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields