N22 电能测量和负荷控制系统 标准查询与下载

JJF 1245.2-2010 安装式电能表型式评价大纲-特殊要求-机电式有功电能表(0.5、1 和2级)

本大纲适用于频率为50 Hz或60 Hz单、三相机电式有功电能表(以下简称仪表)的型式评价。 本大纲不适用于接线端电压超过600 V(多相仪表为线对线电压)的机电式仪表、携带式仪表及仪表计度器的数据接口。对架装式仪表,本部分不涉及其机械性能。

Program of Pattern Evaluation of Electricity Meters-Particular Requirements- Electromechanical Meters for Active Energy (classes 0.5, 1 and 2)

JJF 1245.6-2010 安装式电能表型式评价大纲特殊要求功能类电能表

本大纲适用于频率为50 Hz或60 Hz的单相、三相多功能电能表、预付费电能表以及多费率电能表等功能类电能表(以下简称仪表)的型式评价。 本大纲不适用于接线端电压超过600 V(多相仪表为线对线电压)的仪表、携带式仪表、仪表计度器的数据接口及标准仪表。对架装式仪表,本部分不涉及其机械性能。

Program of Pattern Evaluation of Electricity Meters-Particular Requirements- Electricity Meters with Functions

JB/T 10923-2010 电子式电能表用磁保持继电器

本标准规定了电子式电能表用磁保持继电器的型号命名与分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于电子式电能表用磁保持继电器。应用于其他电子技术领域中的磁保持继电器，也可参照使用。

Latching relay for electronic watt-hour meters

ANSI C12.20-2010 电表标准.0.2和0.5精度级

This standard establishes the physical aspects and acceptable performance criteria for 0.2 and 0.5 accuracy class electricity meters meeting Blondel's Theorem. Where differences exist between the requirements of this Standard and C12.1 and C12.10, the requirements of this Standard shall prevail.

Standard For Electricity Meters - 0.2 and 0.5 Accuracy Classes

DIN EN 61557-11:2009 交流1000V和直流1500V以下低压配电系统电气安全.防护检测的试验,测量或监控设备.第11部分:TT,TN和IT系统中A型和B型剩余电流监测器(RCMs)的有效性

Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 11: Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT

SANS 62055-52:2009 电力计量.付费系统.第52部分:标准传输规范(STS).直接本地连接双向虚拟令牌载波信号物理层协议

Specifies a physical layer protocol of the Standard Transfer Specification for transferring units of credit and other management information between a client (typically a hand held unit) and a server (an STS-compliant electricity payment meter), typicall

Electricity metering - Payment systems Part 52: Standard transfer specification (STS) - Physical layer protocol for a two-way virtual token carrier for direct local connection

DL/T 698.1-2009 电能信息采集与管理系统 第1部分:总则

本部分规定了电能信息采集与管理系统的结构、基本功能和性能指标。 本部分适用于电能信息采集与管理系统的设计、使用和验收。

Data acquisition and management system for electrical energy.Part 1:General consideration

DIN EN 62059-31-1:2009 电能测量设备.可靠性.第31-1部分:加速可靠性测试.提高温度和湿度(IEC 62059-31-1-2008).德文版本EN 62059-31-1-2008

Electricity metering equipment - Dependability - Part 31-1: Accelerated reliability testing - Elevated temperature and humidity (IEC 62059-31-1:2008); German version EN 62059-31-1:2008

BS EN 62059-31-1:2009 电计量设备.可靠性.增加可靠性测试.提高温度和湿度

Electricity metering equipment - Dependability - Accelerated reliability testing - Elevated temperature and humidity

BS EN 62059-31-1:2008 电计量设备.可靠性.增加可靠性测试.提高温度和湿度

This part of IEC 62059 provides one of several possible methods for estimating product life characteristics by accelerated reliability testing. Acceleration can be achieved in a number of different ways. In this particular standard, elevated, constant temperature and humidity is applied to achieve acceleration. The method also takes into account the effect of voltage and current variation. Of course, failures not (or not sufficiently) accelerated by temperature and humidity will not be detected by the application of the test method specified in this standard. Other factors, like temperature variation, vibration, dust, voltage dips and short interruptions, static discharges, fast transient burst, surges, etc. – although they may affect the life characteristics of the meter – are not taken into account in this standard; they may be addressed in future parts of the IEC 62059 series. This standard is applicable to all types of metering equipment for energy measurement, tariffand load control in the scope of IEC TC 13. The method given in this standard may be used for estimating (with given confidence limits) product life characteristics of such equipment prior to and during serial production. This method may also be used to compare different designs.

Electricity metering equipment - Dependability - Accelerated reliability testing - Elevated temperature and humidity

SANS 474:2009 电量表操作规程

Specifies procedures and standards to be adhered to by electricity licensees and their agents in operating and servicing new and existing metering installations that are to be used for billing purposes. Applicable to metering installations in their entir

Code of practice for electricity metering

NRS 049-2008 住宅和商业用户的先进计量基础(AMI)

Sets out the requirements for AMI metering systems intended for time-of-use metering and load management of customers with single-phase and three-phase service connections. Intended that AMI systems will cater for both credit and prepayment metering appl

Advanced Metering Infrastructure (AMI) for residential and commercial customers

DIN EN 50470-1 Berichtigung 1:2008 电学计量设备(交流电).第1部分:一般要求、试验和试验条件.测量设备(等级指数A、B和C).技术勘误DIN EN 50470-1(VDE 0418-0-1)-2007

Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C); German version EN 50470-1:2006, Corrigendum to DIN EN 50470-1 (VDE 0418-0-1):2007-05

NF C44-056-46/A1*NF EN 62056-46/A1:2008 电量测量.电表读数、计费和负载控制的数据交换.第46部分:使用高级数据链路控制(HDLC)协议的数据传输器链路层

Electricity metering - Data exchange for meter reading, tariff and load control - Part 46 : data link layer using HDLC protocol.

NF C44-056-53:2008 电量测量.电表读数、电费和负载控制的数据交换.第53部分:COSEM应用层

Electricity metering - Data exchange for meter reading, tariff and load control - Part 53 : COSEM application layer.

NF C44-056-61:2008 电量测量.电表读数、电费和负载控制的数据交换.第61部分:目标识别系统(OBIS)

Electricity metering - Data exchange for meter reading, tariff and load control - Part 61 : object identification system (OBIS).

NF C44-056-62:2008 电量测量.电表读数、电费和负载控制的数据交换.第62部分:接口等级

Electricity metering - Data exchange for meter reading, tariff and load control - Part 62 : interface classes.

NF C44-056-47:2008 电量测量.电表读数、电费和负载控制的数据交换.第47部分:IPv4网络用COSEM传输层

Electricity metering - Data exchange for meter reading, tariff and load control - Part 47 : COSEM transport layers for IPv4 networks.

DIN EN 62055-31 Berichtigung 1:2008 电度表.支付系统.第31部分:特殊要求.电度表用固定支付系统(级别1和2).技术勘误DIN EN 62055-31 (VDE 0418-5-31)-2006

Electricity metering - Payment systems - Part 31: Particular requirements - Static payment meters for active energy (classes 1 and 2), (IEC 62055-31:2005); German version EN 62055-31:2005; Corrigenda to DIN EN 62055-31 (VDE 0418-5-31):2006-07

DL/T 614-2007 多功能电能表

本标准规定了电力行业在订货、验收、使用多功能电能表时的技术要素，同时规范功能设置。 本标准适用于测量参比频率为50Hz(或60Hz)的单、三相交流电能的安装式多功能电能表(简称电能表)。 本标准仅规定了多功能电能表需具备的功能和必须达到的技术性能，多费率电能表的技术要求可参照本标准相关内容。

Multifunction electricity meterring equipment(A.C.)