共找到 140 条与 相关的标准,共 10 页
本文件规定了公路钢结构梁桥安装的术语、定义和基本要求以及钢板梁安装、钢箱梁安装、钢-混组合梁安装、工地连接和成桥验收的要求。本文件适用于公路钢箱梁、钢板梁、钢混组合梁的工地安装。
Specifications for Manufacture, Installation and Quality Inspection of Highway Steel Structure Beam Bridge Part 2: Installation Requirements
本文件规定了公路钢结构梁桥检验检测的术语和定义、自检、抽检要求、材料、焊缝无损检测、圆柱头焊钉焊接检验、产品试板检验、高强度螺栓摩擦面抗滑移系数检验和高强度螺栓连接副终拧质量检查、涂层检验、检验报告的要求。本文件适用于公路钢板梁、钢箱梁及钢混组合梁的检验检测。
Specifications for Manufacture, Installation and Quality Inspection of Highway Steel Structure Beam Bridge Part 3: Quality Inspection Requirements
本文件规定了公路钢结构梁桥制造的术语和定义、基本要求、材料、零件加工、部件制作、预拼装与试装、制造验收、涂装、包装、存放及运输的要求。本文件适用于公路钢板梁、钢箱梁及钢混组合梁的制造。
Specifications for Manufacturing, Installation and Quality Inspection of Highway Steel Structure Beam Bridges Part 1: Manufacturing Requirements
本文件规定了大件运输车辆公路桥梁通行评估的基本要求、评估方法及要求、通行监测的内容及要求。本文件适用于对大件运输车辆通行陕西省公路配筋混凝土梁式桥的安全评估和实时监测。其他类型公路桥梁通行评估可参照执行。
Regulations for assessing the passage of large-scale transport vehicles on roads and bridges
Technical specification for bridge cable hoisting system
Technical specification for delivery of bridge engineering information model
Technical specification for application of information model in bridge engineering
Technical regulations for bridge foundation pile inspection
Maintenance Guide for Long Bridges Part 4: Design Standards for Database Architecture of Health Monitoring System
Maintenance Guide for Long Bridges Part 5: Alarm Threshold Setting for Health Monitoring
Guidelines for Design and Construction of Rural Highway Bridges
Technical specification for construction monitoring of large section steel box girder
Technical specification for physical detection of highway concrete girder bridge completion (handover)
本文件规定了漫水桥梁耐水支座的术语和定义,分类、型号、规格及结构型式,技术要求,试验方法和检验规则,标志、包装、运输和存储,安装和养护。 本文件适用于公路、市政漫水桥梁耐水支座的应用,铁路桥梁可参考使用。
Technical specification for the application of water-resistant bearings of flooded bridges
本文件规定了桥梁防落梁支座的术语和定义、符号、分类、技术要求、设计、安装与验收、维护等要求。 本文件适用于公路、市政桥梁的防落梁设计,铁路和城轨交通桥梁可参照执行。
Technical specifications for anti-drop beams of bridge supports
本文件规定了盾构管片橡胶密封垫的术语和定义、符号、分类、技术要求、试验检测、设计及安装等要求。 本文件适用于盾构法施工的公路、市政、铁路及轨道交通等隧道工程。
Shield segment rubber seal technical specification
Technical specification for construction of bridge prestressed tunnel with circulating grouting
Specifications for operation, maintenance and management of bridge health monitoring system
Maintenance Guide for Long Bridges Part 3: Periodic Inspection Work Acceptance
Technical specification for ultra-high performance concrete steel bridge deck pavement system
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号