共找到 291 条与 木构配件 相关的标准,共 20 页
Timber. Classification of solid oak parquet strips.
Timber. Manufacture and classification of mosaic parquet panels.
Divides the blocks by quality into the two grades I and II corresponding to the conditions stated in the tables. The regulations for manufacture, characteristics and delivery conditions are fixed by ISO 5321.
Coniferous wood raw parquet blocks; Classification of fir and spruce parquet blocks
Applies to blocks intended for the manufacture of strips for different types of parquet flooring. Specified are materials, design and manufacture, dimensions, squareness of ends, and permissible deviations, moisture, the methods of sampling and quality control, and delivery conditions, measurement and marking.
Coniferous wood raw parquet blocks; General characteristics
Divides the non-assembled strips by quality into the three grade (+++), (++), and (+) corresponding to the conditions stated in the tables. The regulations for manufacture, characteristics and delivery conditions are fixed by ISO 1027.
Solid wood parquet; Classification of maritime pine strips
Applies to paving used for covered (indoor) and open (outdoor) spaces. The permissible wood or sawing defects and corresponding acceptance conditions are listed in a table.
Solid wood paving blocks; Softwood paving blocks; Quality requirements
Specifies manufacture, dimensions, tolerances and the inspection and delivery conditions and marking. The common and special shapes are shown in figures. Applies to blocks used for paving covered (indoor) and open (outdoor) spaces. Describes the methods of protection treatment.
Solid wood paving blocks; General characteristics
Applies to paving used for covered (indoor) and open (outdoor) spaces. Blocks made of Fagus sylvatica wood are intended for use in covered spaces only. The permissible wood or sawing defects are listed in a table.
Solid wood paving blocks; Hardwood paving blocks; Quality requirements
Manufacture, inspection, delivery, marking of mosaic panels of any species of wood.
Specification for mosaic parquet panels. General characteristics
Skirting boards made of northern coniferous timber
Skirting boards made of northern coniferous timber
Lays down manufacturing characteristics and dimensions, permissible deviations, methods for quality control and delivery conditions, measurement and marking assisted by tables and examples.
Broadleaved wood raw parquet blocks; General characteristics
Divides the blocks used for manufacturing different types of parquets by quality into the three grades I, II, and M corresponding to the conditions stated in the tables. Grade M is mainly intended for manufacturing mosaic parquet. The regulations for manufacture, characteristics and delivery conditions are fixed by ISO 3397.
Broadleaved wood raw parquet blocks; Classification of oak parquet blocks
Divides non-assembled strips into two quality grades that are identified by (+++) and (++) corresponding to the conditions specified in the tables. The regulations for manufacture, characteristics and delivery conditions are fixed by ISO 1072. Replaces the first edition from 1972.
Solid wood parquet; Classification of beech strips
Divides the blocks by quality into the two grades I and II corresponding to the conditions stated in the tables. Unless otherwise requested, the wood shall be steamed before delivery and the type of sawing may be the subject of special agreements in the orders. The regulations for manufacture, characteristics and delivery conditions are fixed by ISO 3397.
Broadleaved wood raw parquet blocks; Classification of beech parquet blocks
These symbols are composed of four adjoining capital letters, not separated by points and not followed by a full stop. The letter X as the fourth indicates that any species of the respective genus is concerned. When characteristic differences presented by different species of one genus are to be taken into account, the fourth letter is the first of the species name. The Annex contains the code of symbols.
Wood for manufacture of wood flooring; Symbols for marking according to species
These panels of any species of wood are assemblies made from wood fingers of a parallelepiped rectangular shape, forming component squares laid in a chequered pattern; they are intended to be bonded (or sealed) to a supporting base, either directly or over an interlayer of adequate material. Specified are dimensions, permissible deviations, etc., the inspection and delivery conditions and marking.
Mosaic parquet panels; General characteristics
Specified are cross-section, dimensions, permissible deviations, etc., the inspection and delivery conditions and the marking of strips with rectangular face of any species of wood. They are manufactured in three different profiles, calles respectively: types P1 (variants A and B), P2 and P3, the dimension characteristics of which are given in tables and shown in figures.
Solid wood parquet; General characteristics
TIMBER. SOLID WOOD FLOORING STRIPS. MANUFACTURING CHARACTERISTICS.
Skirting boards made of European timber (except northern timber)
Skirting boards made of European timber (except northern timber)
Wood mosaic flooring made from fingers of any species of wood in patterns intended to be bonded to a supporting base. Dimensions in metric units (with British equivalents).
Specification for mosaic parquet panels - Classification and quality requirements
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号