Q73 金属构配件 标准查询与下载

JIS A 5525:2004 钢管桩

この規格は，土木?建築などの構造物の基礎に使用する溶接鋼管ぐい（以下,くいという。)について規定する。 備考地すべり抑止用のくいを含む。

Steel pipe piles

SANS 301-12:2004 围墙．第12部分：钢制栅栏围墙规范

Specifies requirements for steel palisade fences and gates of corrugated and angle pales for heights up to 2,4 m for general purposes and of corrugated pales for heights of 3,0 m and 3,6 m, all with posts at 2,75 m centers for security purposes.

Fences Part 12: Specification for steel palisade fences

CSA A660-04-2004 钢建筑系统制造商认证

Canadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve co

Certification of steel building system manufacturers

JG/T 160-2004 混凝土用膨胀型、扩孔型建筑锚栓

Expansion type and expansion type building anchor bolts for concrete

JIS A 4713:2004 住宅用滑动防雨窗板

この規格は，主として住宅に使用する金属製雨戸(以下,雨戸という。)で，JIS A 4706に規定するサッシ(以下,サッシという。)のうち，開閉形式がスライディングに取り付けられるものについて規定する。ただし，折りたたみ形式及び巻き取り形式のものには適用しない。 備考この規格で規定する雨戸とは，あらかじめ雨戸枠と雨戸本体とが製作・調整されていて，現場取り付けに際して1個の構成材として扱うことができるものをいう。

Residential sliding storm window panel

JIS A 4709:2004 窗用纱窗

この規格は，主としてJIS A 4706に規定するサッシ(以下,サッシという0)に取り付けられるアルミニウム合金製網戸で，四周を構成するかまちに網を張ったもの(以下,網戸という。)について規定する。ただし，四周にかまちのある折りたたみ網戸には適用するが，網を折りたたむタイプ及び網を巻き取るタイプには適用しない。 備考この規格で規定する網戸とは，蚊，ハエなどの室内への飛来侵入を防ぐためにサッシに取り付 けるものをいう。

Screens for windows

JIS A 6601:2004 住宅阳台和栏杆用金属元部件

この規格は，住宅に使用する金属製バレコニー構成材［以下,バルコニー()という。]及び手すり構成材［以下,手すり()という。］について規定する。 注()バルコニーとは，デッキ材を除いたもので建物の外壁から突き出した屋外の床をいう。 ()手すりとは，建物に設置きれた安全さく(柵)をいう。

Metal components for balcony and handrails of dwellings

JIS A 6711:2004 复合金属壁板

この規格は，金属製の表面材()及びしん(芯)材()を複合した製品で。主に建築物の外装に用いる金属サイディング（以下,サイディングという。)について規定する。 注()表面材は，表面処理鋼板，アルミニウム合金塗装板，塗装ステンレス鋼板などをいう。 ()しん材は，せっこうボード，ロックウール化粧吸音板，硬質プラスチックフオームなどをいう。

Composite sidings with metal

JIS A 6519:2004 体育馆地板用钢制罩饰结构材料

この規格は，体育館()に使用する鋼製床下地構成材()以下,構成材という。)について規定する。 注()ここでいう体育館とは，一般体育館，柔道場，剣道場及び柔剣道場をいう。また，この体育館の床には[過大な荷電が負荷する床(多目的床など)］は，含まないものとする。 ()鋼製床下地構成材とは，支持脚，大引，根太，床パネルなどの主要部材で構成されたものをいう。 なお，支持脚とは，支持台，調整ボルト・ナット，支持板，緩衝材などのいずれかで構成されたものをいう。

Steel furring components for gymnasium floors

JIS A 5759 ERRATUM 1:2004 勘误

ERRATUM

BS 4873:2004 铝合金窗

This British Standard specifies requirements for the design, construction and performance of aluminium alloy windows intended to be installed vertically, including materials and glazing. It is applicable to the following window types, which can be in multi-light form: a) hinged-side-hung (open in or out), top-hung (open out), bottom-hung (open in), tilt and turn; b) projecting-side-hung (open out or reversible) and top-hung (open out or reversible); c) pivoted-horizontal and -vertical (hung centrally or off-centre including reversible); d) sliding-horizontal and -vertical (including tilting sash to vertical); e) fixed lights; f) louvred-adjustable. It is also applicable to windows that are used for replacement purposes and those that have thermally improved frames. It is not applicable to: 1) windows in which any frame member is longer than 3 m; 2) fixed louvres; 3) secondary windows applied to convert existing single windows into double or coupled windows; 4) windows with frames designed to be glazed with security glazing conforming to BS EN 1063 or BS 5544; 5) the thermal properties of thermally improved frames. NOTE Advisory notes on materials and construction are given in Annex A, and details of optional features to be agreed between the manufacturer and the purchaser are given in Annex B.

Aluminium alloy windows

ASTM C645-04a 非结构钢构件标准规范

1.1 This specification covers nonstructural steel framing members in interior construction assemblies. 1.2 The values stated in inch-pound units are to be regarded as the standard. The SI (metric) values given in parentheses are for information purposes only. 1.3 The following safety hazards caveat pertains only to the test method portion, Sections 9 and 10, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Nonstructural Steel Framing Members

ASTM C645-04 非结构钢构件标准规范

1.1 This specification covers nonstructural steel framing members in interior construction assemblies. 1.2 The values stated in inch-pound units are to be regarded as the standard. The SI (metric) values given in parentheses are for information purposes only. 1.3 The following safety hazards caveat pertains only to the test method portion, Sections 9 and 10, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Nonstructural Steel Framing Members

SANS 1845:2003 用于室内和室外的强化板金加工品

Specifies performance requirements for prepainted and organic film/metal laminate products in sheet and strip form that are coated on one or both sides with an organic film, and are intended for fabrication into products for use in the construction or fi

Prefinished sheet metal products for interior and exterior building applications

KS F 5603-2003 金属围墙和大门

이 규격은 주로 부지의 구획에 사용되는 금속제 격자 펜스(1) 및 문짝(2) (이하 격

Fences and gates with metals

NF P24-204-1:2003 DTU 37.2.建筑工程.现有框架翻新中金属细木工制品.第1部分:技术规范

DTU 37.2 - Building works - Metal joinery in renovation on existing frame - Part 1 : technical specifications.

NF P24-204-2:2003 DTU 37.2.建筑工程.专用市场.现有框架翻新时的金属细木工制品.第2部分:特殊条款

DTU 37.2 - Building works - Private markets - Metal joinery during renovation on existing frame - Part 2 : special clauses.

KS F 4528-2003 纸架

이 규격은 두루마리 휴지걸이(이하 휴지걸이라 한다.)에 대하여 규정한다.

Paper holder

KS F 4535-2003 天花板用铝合金百叶窗

이 규격은 천장재로 사용되는 알루미늄제 루버(이하 루버라 한다.)에 대하여 규정한다.

Aluminium louver for ceiling

JG/T 152-2003 钢质多功能户门门框型材

本标准规定了钢质多功能户门门框型材的分类、型号、要求、试验方法、检验规则及包装、标志、运输、贮存。 本标准适用于以冷轧钢板、钢带为原料，采用冷弯、轧制成型工艺生产的多功能户门门框型材。

Profiles of steel multifunction external doorframe