Q73 金属构配件 标准查询与下载

JG/T 154-2003 电动伸缩围墙大门

Electric flex gate

JG/T 153-2003 上滑道车库门

本标准规定了上滑道车库门的技术要求 ，试验方法，检验规则，标志，包装 .运输和贮存。 本标准适用于住宅建筑和公共建筑的上滑道车库门。

Sectional garage door

JG/T 155-2003 电动平开、推拉围墙大门

本标准规定了电动平开、推拉围墙大门的分类和标记、要求、检验方法、检验规则、标志、包装、运输、贮存等内容。 本标准适用于工业与民用建筑用电动平开、推拉围墙大门，其他场所用电动平开、推拉大门可参照使用。

Electric swing or sliding gate

SANS 727:2003 热轧软钢制门窗

Covers windows, doors, sidelights and fanlights fabricated from rolled steel sections,complete with fittings and ancillary components.

Windows and doors made from rolled mild steel sections

CSA A123.2-03-2003 涂沥青的屋顶毡 更新号 1：02/2006

Asphalt-coated roofing sheets Update 1: 02/2006

Roofing felt coated with second edition bitumen; Update No. 1: 02/2006

GOST 21519-2003 铝窗的规范

Windows of aluminium. Specifications

GOST 31173-2003 钢门的规范

Steel doors. Specifications

KS F 2277-2002 住宅隔热材料隔热性能测试方法

이 규격은 주로 벽, 지붕, 천장, 바닥 등의 건축용 구성재의 단열 성능으로서의 열관류율,

Thermal insulation－Determination of steady－state thermal transmission properties－Calibrated and guarded hot box

KS F 4708-2002 碱性碳酸镁保温材料

이 규격은 열을 절연하는 데 사용하는 탄산마그네슘 물반죽 보온재, 탄산마그네슘 보온판 및

Basic magnesium carbonate heat insulating material

BS 460:2002+A2:2007 铸铁雨水管件.规范

This British Standard specifies the requirements for cast iron rainwater systems for use on buildings.The sizes of the rainwater system extend from DN 50 to DN 150. This standard specifies the requirements for the materials, dimensions, tolerances, mechanical properties, surface condition, primary coatings, jointing methods and marking for the following components of the rainwater system: - rainwater pipes, fittings and components used for assembly or support; -gutters, including half-round, ogee and beaded, fittings and components used for assembly or support; - gutters, including half-round, ogee and beaded, fittings and components used for assembly or support.

Cast iron rainwater goods - Specification

JIS A 5513:2002 装土、石用的铁丝筐

この規格は，石又は類似のものを詰めて土留めに使うひし形金網を主体とした亜鉛めっき鉄線製，塩化ビニル被覆鉄線製，着色塗装亜鉛めっき鉄線製及び溶融アルミニウムめっき鉄線製じゃかご(以下,じゃかごという。)について規定する。

Gabions

JG 144-2002 门式刚架轻型房屋钢构件

本标准规定了门式刚架轻型房屋钢构件的代号、要求、试验方法、检验规则、标志、包装、运输和储存等。 本标准适用于一般工业与民用建筑的门式刚架轻型房屋钢结构构件，类似钢构件可参照使用。本标准未规定的，应按国家现行有关标准规定执行。

Steel members of light-weight buildings with gabled frames

SANS 1408:2002 钢筋束基岩石支撑系统用机械组件

This standard gives the performance requirements for mechanical components for tendon based rock support systems for use in the mining industry.

Mechanical components for tendon based rock support systems

JIS A 6517:2002 建筑物中墙和顶棚用钢制罩面板条

この規格は，建築物の壁及び天井の鋼製下地材(以下,壁下地材及び天井下地材という。)について規定する。また，製品とは，本体と附属金物から組み立てられる鋼製下地材をいう。

Steel furrings for wall and ceiling in buildings

JG 139-2001 吊挂式玻璃幕墙支撑装置

本标准规定了吊挂式玻璃幕墙金属支承装置的要求、力学性能、试验方法、检验规则及标志、包装、贮存和运输等。 本标准适用于吊挂式玻璃幕墙的金属支承装置(吊夹)。

The support device of suspended glass curtain wall

KS F 2275-2001 合叶反复开关测试方法

이 규격은 경첩의 반복 개폐 시험 방법에 대하여 규정한다.

Performance test of hinges

SS CP89-2001 金属屋面实施规程

This Code of Practice is intended to provide guidelines, information and recommendations to the specifier and end user on the design, performance, installation, transportation and handling of metal roofing material. It represents a standard of good practice between manufacturers and roofing contractors. It covers the use of galvanised, zinc/aluminium and pre-painted profile metal conforming to SS 370:1994 and other trapezoidal and trough section roof profiles not specifically covered by appropriate standards. It is intended to be read in conjunction with maunfacturer's technical product literature.

CODE OF PRACTICE FOR Metal roofing

KS F 4716-2001 水泥基表面涂料

This standard specifies cement filling compound for surface preparation(1)(hereinafter to be called "compound for surface") used for the surface of inside and outside of architectures. Note(1): More than 1mm thick finished by trowel and spatula.

Cement filling compound for surface preparation

KS F 4601-2001 石笼

This Korean Industrial standard specifies gabion made of the zinc-coated steel wire, vinyl chloride-covered steel wire and aluminum-coated steel wire of a diamond shaped (1) steel net, which is used with stones or others similar to stones. Note (1): Diamond shape shall be preferably a squared-shape.

Gabion

KS F 4552-2000 金属板条

이 규격은 미장 공사의 바탕 및 콘크리트의 바탕에 사용하는 메탈 라스에 대하여 규정한다.

Metal lath