共找到 247 条与 标准化、质量管理 相关的标准,共 17 页
This publication was prepared by the NTCIP Profiles Working Group, which is a subdivision of the Joint Committee on the NTCIP. The Joint Committee is organized under a Memorandum of Understanding among the American Association of State Highway and Trans
National Transportation Communications for ITS Protocol Trivial File Transfer Protocol Application Profile v01.06; A Joint Standard of AASHTO, ITE, and NEMA
This specification covers single-cell, precast reinforced concrete box sections with less than 2 ft ofcover subjected to highway loadings and intended to be used for the construction of culverts and for the conveyance of storm water, industrial wastes, a
Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers with Less Than 2 ft of Cover Subjected to Highway Loadings
This standard recommended practice covers the laboratory testing required to evaluate asphalt additives and modifiers in both neat asphalt and in asphalt-aggregate hot mixtures. The terms “additive” and “modifier” are used interchangeably and are broadl
Standard Practice for Asphalt Additives and Modifiers
This test method covers determination of the coefficient of thermal expansion (CTE) of hydraulic cement concrete cores or cylinders. Since it is known that the degree of saturation of concrete influences its measured coefficient of thermal expansion, t
Standard Method of Test for Coefficient of Thermal Expansion of Hydraulic Cement Concrete
This test method allows detection within 16 days of the potential for deleterious expansion of mortar bars due to the alkali-silica reaction.
Standard Method of Test for Accelerated Detection of Potentially Deleterious Expansion of Mortar Bars Due to Alkali-Silica Reaction
These guidelines are written as supplemental to the AASHTO Standard Specifications for Highway Bridges, 16th Edition, Division I-A: Seismic Design and incorporate the generic requirements for seismic isolation design.Isolating structures from the damaging
Guide Specifications for Seismic Isolation Design Revision 2; 2000 Interim Revision
The force ductility of an asphalt material is determined by measuring the tensile stress induced on a specimen when two ends of a briquet specimen of the material, are pulled apart at 5 cm/min.
Standard Method of Test for Force Ductility Test of Asphalt Materials
This method covers the determination of the particle size distribution of granular soil material. This method utilizes the 6.3-mm sieve size for separation purposes. However, the sample tester may use an alternative sieve size (i.e., 4.75 mm, 2.00 mm, e
Standard Method of Test for Grain-Size Analysis of Granular Soil Materials
This method determines (after 15 hours in water) the bulk specific gravity and the apparent specific gravity as defined in M 132, the bulk specific gravity on the basis of mass of saturated surface-dry aggregate, and the absorption as defined in M 132.
Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
This test method covers the determination of the percentage of evaporable moisture in a sample of aggregate by drying both surface moisture and moisture in the pores of the aggregate.
Standard Method of Test for Total Evaporable Moisture Content of Aggregate by Drying
This specification covers single-cell, precast reinforced concrete box sections with less than 0.6 m of cover subjected to highway loadings and intended to be used for the construction of culverts and for the conveyance of storm water, industrial wastes
Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers with Less Than 0.6 m of Cover Subjected to Highway Loadings [Metric]
The scheduling domain covers the data needs of the functions related to scheduling and runcutting.
Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Scheduling / Runcutting (SCH) Objects v01.02; Joint Standard of AASHTO, ITE, and NEMA; Also referenced as TCIP-SCH; Spring 2001 prin
Among the APTS data interchange needs is the ability to transfer information about the location of transit
Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Spatial Representation (SP) Objects v01.02; Joint Standard of AASHTO, ITE, and NEMA; Also referenced as TCIP-SP; Spring 2001 printin
The on-board domain covers the data needs of the functions related to on-board applications. This includes all data needed for the communications between on-board components within a public transportation vehicle and other transit applications. The data
Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on On-Board (OB) Objects v01.02; A Joint Standard of AASHTO, ITE, and NEMA; Also referenced as TCIP-OB
The control center domain covers the data needs of the functions related to control center applications.
Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Control Center (CC) Objects v01.02; A Joint Standard of AASHTO, ITE, and NEMA; Also referenced as TCIP-CC
This document defines the common public transportation data elements and messages that are used by other business areas of the Transit Communications Interface Profiles (TCIP). This document and the
Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Common Public Transportation (CPT) Objects v01.02; A Joint Stanard of AASHTO, ITE, and NEMA; Also referenced as TCIP-CPT
The incident management domain covers the data needs related to detecting, verifying, prioritizing, responding to, and clearing unplanned events (i.e., accidents, weather conditions, crimes, etc.) that affect transit operations. These include all data
Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Incident Management (IM) Objects v01.02; Joint Standard of AASHTO, ITE, and NEMA; Also referenced as TCIP-IM; Spring 2001 printing
The passenger information domain covers the data needs related to providing passengers and potential passengers with the information for planning and making trips using public transportation services. This
Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Passenger Information (PI) Objects v01.02; Joint Standard of AASHTO, ITE, and NEMA; Also referenced as TCIP-PI; Spring 2001 printing
本标准规定了水路货物运输质量考核指标和统计要求。 本标准适用于从事营业性内、外贸货物运输及相关的港口装卸、储存、驳运等作业的企业、单位和个体联户。
Check indexes and statistics requests of carrying quality for freight bu water
This method covers procedures for preparing and testing untreated subgrade soils and untreated base/subbase materials for determination of resilient modulus (Mr) under conditions representing a simulation of the physical conditions and stress states of
Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号