S11 线路构件 标准查询与下载

NF F50-201-1:2008 轨道交通.轨道.钢轨.第1部分:46 kg/m及以上的丁字形铁道钢轨

Railway applications - Track - Rail - Part 1 : Vignole railway rails 46 kg/m and above.

DIN EN 13674-1:2008 轨道交通.轨道.钢轨.第1部分:46 kg/m及以上的丁字形铁道钢轨

This European Standard specifies Vignole railway rails of 46 kg/m and greater linear mass, for general and high speed railway track usage. Seven pearlitic steel grades are specified covering a hardness range of 200 to 390 HBW and include non heat treated carbon manganese steels; non heat treated alloy steels; and heat treated carbon manganese and Iow alloy steels. There are 21 rail profiles specified in this Standard. Two classes of rail straightness are specified, differing in requirements for straightness, surface flatness and crown profile. Two classes of profile tolerances are specified.

Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above (includes Amendment A1:2007); English version of DIN EN 13674-1：2008-01

JIS E 1123:2007 轨端淬火钢轨

この規格は，JIS E1101に規定する普通レールの端部における頭部に熱処理を施した鉄道用レール(以下，レールという。)について規定する。

End hardened rails

JIS E 1120:2007 轨头淬火钢轨

この規格は，頭部全断面にわたり熱飢理を施した鉄道用レール(以下，レールという。)について規定する。

Head hardened rails

DIN EN 13977:2007 轨道交通.轨道.建造和维修用便携式机械和触轮的安全要求

This document deals with the technical requirements to minimise the railway specific significant hazards of portable machines and trolleys used for work on tracks as listed in clause 4 and annex A which can arise during the commissioning, the operation and the maintenance of portable machines and trolleys when used as intended and under the conditions foreseen by the manufacturer. It does not deal with the general function of the machines (e.g. cutting, drilling, grinding). This document applies to portable machines and portable trolleys designed for work on the track with nominal track gauges of 1 435 mm and 1 668 mm and clearance gauge as defined in annex B including cutting machines and those designed for working on wooden sleepers. This document does not apply to portable trolleys coupled together, whether or not self propelled, and trolleys used for transporting personnel. For portable machines and trolleys used on railway lines with a different clearance gauge to that defined in annex B specific requirements concerning the clearance gauge may apply1). This document does not apply to the following: -- requirements for quality of the work or performance of the machine; -- regulations defined by each infrastructure controller for portable machine and trolley operation which shall be the subject of negotiation between the user and the manufacturer; -- portable machines used from railway vehicles. This document does not establish the additional requirements for the following: -- operation in severe conditions (e.g. extreme environmental conditions such as: freezing applications, high temperatures, corrosive environment, tropical environment, contaminating environments, strong magnetic fields); -- operation subject to special rules as potentially explosive atmospheres; -- electromagnetic compatibility, due to e.g. electronic components; -- hazards occurring during decommissioning and/or recycling; -- hazards due to vibration; -- hazards due to wind speed greater than 35 m/s; -- hazards due to natural causes e.g. earthquake, lightning, flooding etc. -- noise. NOTE Noise of machines which are dealt with by this document is regarded as a significant hazard. Noiseis not covered by this document but will be dealt with in an Amendment to the first edition of this standard. This Amendment will give: -- clauses dealing with noise emission according to EN 1746. -- a noise test code using as a basis for preparation the designation of noise-emission according to the requirements of the Machinery-Directive 98/37/EC, annex I, clause 1.7.4f.

Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance (includes Amendment A1:2007); English version of DIN EN 13977:2007-11

NF F50-587-1:2007 轨道交通.轨道.钢轨的闪光对接焊.第1部分:固定厂房中新的R220、R260、R260Mn和R350HT级钢轨

Railway applications - Track - Flash butt welding of rails - Part 1 : new R220, R260, R260Mn and R350HT grade rails in a fixed plant.

SANS 913:2007 轻轨用弹性道钉

This standard covers the requirements for springspikes for flat-bottom rails of mass per length 15, 22, and 30 kg/m. It does not cover springspikes used in the national rail network.

Springspikes for light rails

NF F58-012/IN1:2007 轨道交通.轨道.建造和维护用便携式机械和滚轮的安全要求

Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance.

NF F58-012:2007 轨道交通.轨道.建造和维护用便携式机械和滚轮的安全要求

Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance.

DIN EN 14587-1:2007 轨道交通. 轨道. 钢轨的闪光对接焊. 第1部分: 固定厂房中新的R220, R260, R260Mn和R350HT级钢轨. 英文版本EN 14587-1: 2007-09

This European Standard specifies requirements for the approval of a welding process in a fixed plant, together with the requirements for subsequent welding production. It applies to new Vignole railway rails R220, R260, R260Mn and R350HT grade rails of 46 kg/m and above, as contained in EN 13674-1, welded by a flash butt welding process in a fixed plant and intended for use on railway infrastructures. This European Standard applies to the welding of rails into welded strings.

Railway applications - Track - Flash butt welding of rails - Part 1: New R220, R260, R260Mn and R350HT grade rails in a fixed plant English version EN 14587-1:2007-09

NF F52-010-8:2007 轨道交通.轨道.铁道侧线和道岔口.第8部分:扩展装置

Railway applications - Track - Switches and crossings - Part 8 : expansion devices.

BS EN 14587-1:2007 轨道交通.轨道.钢轨的闪光对接焊.固定厂房中新型的R220、R260、R260Mn和R350HT级钢轨

This European Standard specifies requirements for the approval of a welding process in a fixed plant, together with the requirements for subsequent welding production. It applies to new Vignole railway rails R220, R260, R260Mn and R350HT grade rails of 46 kg/m and above, as contained in EN 13674-1, welded by flash butt welding in a fixed plant and intended for use on railway infrastructure. This European Standard applies to the welding of rails into welded strings.

Railway applications - Track - Flash butt welding of rails - New R220, R260, R260Mn and R350HT grade rails in a fixed plant

DIN EN 13146-4:2007 轨道交通.轨道.紧固设备的试验方法.第4部分:反复载荷效应(包括修改件A1:2006)

This Part of this European Standard specifies a laboratory test procedure applying repeated displacement cycles representative of the displacements caused by traffic on railway track. It is used for assessing the long term performance of direst fastening systems. This test procedure applies to a complete fastening assembly.

Railway applications - Track - Test methods for fastening systems - Part 4: Effect of repeated loading(includes Amendment A1:2006) English version of DIN EN 13146-4:2007-06

DIN EN 13481-3:2007 轨道交通.铁轨.紧固设备的性能要求.第3部分:枕木的紧固设备(包括修改件A1:2006)

This European standard is applicable to fastening systems for use on wood sleepers in ballasted track as follows: - main lines having a radius of curvature greater than 150 m and subject to a maximum design axle load of 260 kN; - light rail systems having a radius of curvature greater than 80 m and subject to a maximum design axle load of 130 kN. The requirements apply to: - direct fastening systems which incorporate a baseplate; - fastening systems for the rail sections in EN 13674-1 and 13674-4. This standard is not applicable to fastening systems for other rail sections, rigid fastening systems or special fastening systems used at bolted joints. This standard is for type approval of a complete fastening assembly only.

Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers(includes Amendment A1:2006); English version of DIN EN 13481-3:2007-06

DIN EN 13481-1:2007 轨道交通.铁轨.紧固设备的性能要求.第1部分:定义(包括修改件A1:2006)

This European Standard defines the terms used in EN 13146 and in EN 13481.

Railway applications - Track - Performance requirements for fastening systems - Part 1: Definitions(includes Amendment A1:2006); English version of DIN EN 13481-1:2007-06

DIN EN 13146-8:2007 轨道交通.轨道.紧固设备的试验方法.第8部分:使用测试(包括修改件A1:2006)

This part of European Standard specifies a procedure for comparative testing of fastening systems in track. The test procedure is applicable to fastening systems which in all other respects comply with EN 13481 Part 2 to 7. This test applies to complete fastening assemblies. It is only to be used for comparative testing of such fastening systems installed at the same time on the type of support for which they are intended.

Railway applications - Track - Test methods for fastening systems - Part 8: In service testing(includes Amendment A1:2006); English version of DIN EN 13146-8:2007-06

DIN EN 13232-8:2007 轨道交通.铁轨.铁路侧线和交叉路口.第8部分:扩展装置

This part of EN 13232 covers the following subjects:to establish a working terminology for expansion devices,for their constituent parts and for the types;to specify the minimum manufacturing requirements for expansion devices and their constituent parts;to formulate codes of practice for inspection and tolerances;to define the method by which expansion devices and their parts should be identified and traced.

Railway applications - Track - Switches and crossings - Part 8: Expansion devices; English version of DIN EN 13232-8:2007-06

DIN EN 13481-7:2007 轨道交通.铁轨.紧固设备的性能要求.第7部分:转辙器、闸口和护轨的特殊紧固设备(包括修改件A1:2006)

This European standard specifies performance requirements for special fastening systems for switches and crossings and for check rails connected to running rails(not independently fixed to the bearers)on wood, concrete and steel bearers in ballasted track and on slab track. It applies to switches and crossings as follows: - in main lines having a radius of curvature greater than 150 m and subject to a maximum design axle load of 260 kN; - in light rail systems having a radius of curvature in divergent track greater than 80 m and subject to a maximum design axle load of 130 kN. The requirements apply to fastening systems which incorporate a resillient element This standard is for type approval of a complete fastening assembly only.Requirements for quality control are included in standards applicalbe to individual components.

Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails(includes Amendment A1:2006); English version of DIN EN 13481-7:2007-2006

DIN EN 13481-4:2007 轨道交通.铁轨.紧固设备的性能要求.第4部分:钢轨枕的紧固设备(包括技术勘误AC:2004+修改件A1:2006)

This European standard is applicable to fastening systems for use on steel sleepers in ballasted track as follows: - main lines having a radius of curvature greater than 150 m and subject to a maximum design axle load of 260 kN; - light rail systems having a radius of curvature greater than 80 m and subject to a maximum design axle load of 130 kN. The requirements apply to: - direct fastening systems which incorporate a baseplate; - fastening systems for the rail sections in EN 13674-1 and 13674-4. This standard is not applicable to fastening systems for other rail sections, rigid fastening systems or special fastening systems used at bolted joints. This standard is for type approval of a complete fastening assembly only.

Railway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers(includes Corrigendum AC:2004+Amendment A1:2006); English version of DIN EN 13481-4:2007-06

DIN EN 13481-2:2007 轨道交通.铁轨.紧固设备的性能要求.第2部分:混凝土轨枕的紧固设备(包括修改件A1:2006)

This European standard is applicable to fastening systems for use on concrete sleepers in ballasted track as follows: - main lines having a radius of curvature greater than 150 m and subject to a maximum design axle load of 260 kN; - light rail systems having a radius of curvature greater than 80 m and subject to a maximum design axle load of 130 kN. The requirements apply to: - direct fastening systems which incorporate a baseplate; - fastening systems for the rail sections in EN 13674-1 and 13674-4. This standard is not applicable to fastening systems for other rail sections, rigid fastening systems or special fastening systems used at bolted joints. This standard is for type approval of a complete fastening assembly only.

Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers(includes Amendment A1:2006); English version of DIN EN 13481-2:2007-06