S35 牵引电气设备 标准查询与下载

NF F65-349-2:2006 轨道交通.铁路与道路车辆用旋转电机.第2部分:电子变流器.供电交变流电动机

Railway applications - Rotating electrical machines for rail and road vehicles - Part 2 : electric converter-fed alternating current motors.

BS EN 14813-1:2006+A1:2010 轨道交通.机车驾驶室用空调.舒适参数

Railway applications. Air conditioning for driving cabs. Comfort parameters

BS EN 14813-2:2006+A1:2010 轨道交通.机车驾驶室用空调.型式试验

Railway applications. Air conditioning for driving cabs. Type tests

BS EN 50367:2006 轨道交通.集流系统.电杆和架空线之间交互作用的技术标准(实现自由通道)

Combination of different overhead contact lines and pantographs will provide various interaction performances. This standard defines parameters for interoperability in the field of interaction between pantograph and overhead contact line. The document specifies the interface requirements of rolling stock and infrastructure to achieve free access to the European railway network. This standard describes parameters and values for all planned lines and future lines. Annex B gives some essential parameters for existing lines. The energy supply system is not covered by this standard.

Railway applications. Current collection systems. Technical criteria for the interaction between pantograph and overhead line (to achieve free access)

TB/T 3133-2006 铁道机车车辆电子产品的可靠性、可用性、可维修性和安全性（RAMS）

本标准定义了铁道机车车辆电子产品的可靠性、可用性、可维修性和安全性以及其相互作用；规定了电子产品的RAMS指标、量值、要求和解决方案。 本标准适用于铁道机车车辆上的各种电子产品。

Reliability,Availability,Maintainability and Safety (RAMS) of electronic products for railway rolling stock

TB/T 2325.2-2006 机车、动车组前照灯、辅助照明灯和标志灯技术条件.第2部分：辅助照明灯和标志灯

本部分规定了铁路机车、动车组辅助照明灯及标志灯的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本部分适用于铁路干线机车、调车机车、动车组使用的辅助照明灯和标志灯。

Technical specifications for front illuminators,auxiliary illuminators and lighting marks used for locomotive and multiple units.Part 2: Auxiliary illuminators and lighting marks

TB/T 2437-2006 机车车辆用电力变流器特性和试验方法

本标准规定了机车车辆用电力变流器的术语和定义、使用条件、一般特性和试验方法。 本标准适用于为机车车辆 （电力机车、内燃机车、动车、客车及拖车等）牵引电路与辅助电路供电的电力变流器。 本标准也适用于其他牵引机车车辆，例如有轨电车、地铁、城市轨道交通车辆。 ——半导体器件组装； ——组合冷却系统； ——中间直流环节的部件，包括与直流环节相连的滤波器； ——半导体驱动单元（SDU）及有关传感器； ——保护电路。 本标准不适用于为半导体驱动单元（SDU）和变流器工作有关的其他设备（如传感器）供电的变流器。 变流器的电子控制装置，与半导体驱动单元无关的传感器和半导体驱动单元（SDU）的印制板组装应符合TB/T 3021-2002的规定。 本标准不适用于公路电动汽车或TB/T 3021-2001中阐明的低压或小功率变流器。 下列类型的供电电源应予考虑： ——交流接触网； ——直流接触网； ——自备电源（例如车载发电机、蓄电池以及其他电源）。

Power convertors installed on board rolling stock-Characteristics and test methods

TB/T 2325.1-2006 机车、动车组前照灯、辅助照明灯和标志灯技术条件.第1部分：前照灯

本部分规定了铁路机车、动车组前照灯（以下简称前照灯）的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本部分适用于铁路干线机车、调车机车、动车组使用的各种光源前照灯，其他轨道交通机车车辆可以参照使用。

Technical specifications for front illuminators,auxiliary illuminators and lighting marks used for locomotive and multiple units.Part 1: Front illuminators

KS C IEC 60077-5:2006 铁路设施.机车车辆用电气设备.第5部分:电工元件.HV熔断器规则

이 규격에서는 KS C IEC 60077-2에 명시된 규정을 보완하여 고전압 퓨즈에 대한

Railway applications-Electric equipment for rolling stock-Part 5:Electrotechnical components-Rules for HV fuses

KS C IEC 62128-1:2006 铁路设施.固定设备.第1部分:电气安全和接地相关的保护性措施

이 규격에서는 a.c. 및 d.c. 견인 장치와 관련된 고정 설비의 전기 안전 관련 보호

Railway applications－Fixed installations－Part 1：Protective provisions relating to electrical safety and earthing

UIC 647-2006 牵引装置的遥控用功能模块

This Leaflet is applicable to all traction units and driving trailers that are equipped with a train bus in accordance with UIC Leaflet 556 (see Bibliography - page 37). This Leafet can also be applied to other kinds of rolling stock, e.g. EMUs, DMUs (see List of abbreviations - page 36) and high speed trains, in order to develop the remote control application based on an existing standard and to achieve interoperability. This Leaflet is applicable to both diesel and electric traction vehicles.

Functional model for the remote control of traction units

DIN EN 50388:2006 轨道交通.电源设备和铁路车辆.为达到互操作性的电源设备(变电站)和铁路车辆间配合的技术标准.德文版本EN 50388-2005

Railway applications - Power supply and rolling stock - Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability; German version EN 50388:2005

JIS E 5004-1:2006 铁道车辆的电气设备.第1部分:一般使用条件和一般规则

この規格は，車両に組み込まれた電力回路，補助回路，制御回路，表示回路などのすべての電気品に対する一般使用条件全般と一般規則について規定する。

Electric equipment for rolling stock -- Part 1: General service conditions and general rules

IEC 61992-7-3:2006 轨道交通.固定设施.直流开关装置.第7-3部分:直流牵引系统特定用途的测量,控制和保护装置.绝缘电压转换器和其他电压测量装置

This part of IEC 61992 gives the requirements for isolating voltage transducers and other voltage measuring devices used in d.c. railway applications, fixed installations. This transducer is normally positioned between the voltage sensor on the live switchboard conductor or rail and the secondary device, giving galvanic insulation between the input and the output.

Railway applications - Fixed installations - DC switchgear - Part 7-3: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating voltage transducers and other voltage measuring devices

IEC 61992-1:2006 轨道交通.固定装置.直流开关设备.第1部分:总则

The IEC 61992 series specifies requirements for d.c. switchgear and controlgear and is intended to be used in fixed electrical installations with nominal voltage not exceeding 3 000 V d.c., which supply electrical power to vehicles for public guided transport, i.e. railway vehicles, tramway vehicles, underground vehicles and trolley-buses. This Part 1 specifies general requirements.

Railway applications - Fixed installations - DC switchgear - Part 1: General

IEC 61992-7-2:2006 轨道交通.固定装置.直流开关装置.第7-2部分:直流牵引系统中的特定用途用测定,控制和保护装置.隔离换流器和其他电流测定装置

This part of IEC 61992 gives the requirements for isolating current transducers and other current measuring devices used in d.c. railway applications, fixed installations. This transducer is normally positioned between the sensor in the live switchboard conductor or rail and the secondary device, giving galvanic insulation between the input and the output.

Railway applications - Fixed installations - DC switchgear - Part 7-2: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating current transducers and other current measuring devices

IEC 61992-2:2006 轨道交通.固定设备.直流开关设备.第2部分:直流断路器

This part of IEC 61992 specifies requirements for d.c. circuit-breakers for use in fixed installations of traction systems. NOTE Switchgear assemblies, electromagnetic compatibility (EMC) and dependability are not covered in this standard, but by other parts of this standard or by other standards, as indicated in IEC 61992-1.

Railway applications - Fixed installations - DC switchgear - Part 2: DC circuit-breakers

KS C IEC 60077-4:2005 铁路设施.机车车辆用电气设备.第4部分:电工元件.交流断路器规则

KS C IEC 60077-2의 일반 요구 사항에 추가하여, 이 규격은 교류 가공선로 접

Railway applications－Electric equipment for rolling stock－Part 4：Electrotechnical components－Rules for AC circuit-breakers

DIN VDE 0119-207-14:2005 铁路车辆状况.控制和测量仪表技术.第207-14部分:已验收车辆上的软件更改程序

State of the railway vehicles - Control and instrumentation technology - Part 207-14: Procedure for changing the software on approved vehicles

DIN VDE 0119-207-13:2005 铁路车辆状况.控制和测量仪表技术.第207-13部分:EBuLa用车载装置(电子工作时间表和速度限制)

State of the railway vehicles - Control and instrumentation technology - Part 207-13: On-board devices for EBuLa (electronic working timetable and speed restrictions)