S35 牵引电气设备 标准查询与下载

BS EN 50388:2005 轨道交通.电源设备和铁路车辆.为达到互操作性的电源设备(变电站)和铁路车辆间配合的技术标准

This European Standard is intended to be used to set up the requirements for the acceptance of rolling stock on infrastructure in the field of: - co-ordination of protection principles between power supply and traction units, especially fault discrimination for short-circuits; - co-ordination of installed power on the line and power demand of the trains; - co-ordination of traction unit regenerative braking and power supply receptivity; - co-ordination of harmonic behaviour. This standard deals with the definition and quality requirements of the power supply at the interface between traction unit and fixed installations. The standard specifies the interface between rolling stock and electrical fixed installations for traction, in the frame ”supply system“. The interaction between pantograph and overhead line is dealt with in EN 50367. The interaction with subsystem “control-command” (especially signalling) is not dealt with in the standard. Requirements are given for the following categories of line: - TSI lines (high speed and conventional), - classical lines. For classical lines, values, if any, are given for the existing European networks. A set of values is also specified for the future network, which is named ”target“ network. The following electric traction systems are concerned: - railways; - guided mass transport systems that are integrated with the railways; - material transport systems that are integrated with the railways. This standard does not apply retrospectively to rolling stock already accepted by infrastructure managers. However, on new infrastructure, existing rolling stock may be accepted by the infrastructure manager, provided there is an agreement. Information is given to the train operating companies on electrification parameters to enable them to confirm after consultation with the rolling stock manufacturers that there will be no consequential disturbance on the electrification system.

Railway applications. Power supply and rolling stock. Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability

IEC 61287-1:2005 轨道交通.安装在铁路机车上的电力变流器.第1部分:特性和试验方法

This International Standard is applicable to power electronic convertors mounted on board railway rolling-stock and intended for supplying - traction circuits; - auxiliary circuits of power vehicles, coaches and trailers. The application of this standard extends as far as possible to all other traction vehicles, including trolley-buses, for example. This standard covers the complete convertor assembly together with its mounting arrange-ments containing - semiconductor device assemblies; - integrated cooling systems; - components of the intermediate d.c. link, including any necessary filters associated with the d.c. link; - semiconductor drive units (SDU) and related sensors; - incorporated protection circuits. The following types of power sources are taken into consideration: - a.c. contact lines, - d.c. contact lines, - on-board supplies such as generators, batteries and other electric power sources. This standard excludes convertors which provide the electronic control supply for SDU and other supplies relevant to the convertor operation such as sensors. NOTE Electronic control equipment of convertors and those sensors not related to semiconductor drive units and the printed circuit board assemblies of drive units for power semiconductors (SDU) are covered by IEC 60571. This standard defines terminology, service conditions, general characteristics and test methods of electronic power convertors onboard of rolling stock.

Railway applications - Power convertors installed on board rolling stock - Part 1: Characteristics and test methods

DIN VDE 0119-206-7:2005 铁路车辆状况.电力和牵引系统、列车电气设备.第206-7部分:与高压间接接触的防护

State of railway vehicles - Electric and traction systems, train control equipment - Part 206-7: Protection against indirect contact to high voltage

DIN VDE 0119-206-5:2005 铁路车辆状况.电力和牵引系统、列车电气设备.第206-5部分:列车动力供应线路(包括绝缘和接地设备)

State of railway vehicles - Electric and traction systems, Train electrical equipment - Part 206-5: Train power supply line (including equipment for isolation and earthing)

TB/T 2716-2005 机车、动车用柴油机喷油器

本标准规定了机车、动车用柴油机喷油器（以下简称喷油器）和喷油器用喷油嘴偶件（以下简称喷油嘴偶件）的技术要求、试验方法、检验规则以及标志、包装、运输和贮存等要求。 本标准适用于机车、动车用柴油机的喷油器及喷油嘴偶件。

Injectors for diesel engine for locomotive and rail car

TB/T 2715-2005 机车、动车用柴油机喷油泵

本标准规定了机车、动车用柴油机柱塞式喷油泵（以下简称喷油泵）、喷油泵柱塞偶件（以下简称柱塞偶件）、喷油泵出油阀偶见（或组件）[以下简称出油阀偶件（或组件）]的技术要求、试验方法、检验规则以及标志、包装、运输和贮存等要求。 本标准适用于机车、动车用柴油机的单体喷油泵及柱塞偶件和出油阀偶件（或组件）。

Fuel injection pumps for diesel engine for locomotive and rail car

KS C IEC 60349-3:2005 电力牵引.铁路与道路车辆用旋转电机.第3部分:通过组件损失总和法测定换流器供电交流电动机的总损失

이 규격은 KS C IEC 60349-2에 부합하는 기기에 적용한다.컨버터 구동형 전동

Electric traction－Rotating electrical machines for railand road vehicles－Part 3：Determination of the total lossesof convertor-fed alternating current motors by summationof the component losses

NF F42-329*NF EN 50329:2005 轨道交通.固定装置.牵引变压器

Railway applications - Fixed installations - Traction transformers.

DIN VDE 0119-207-4:2005 铁路车辆状况.控制和测量仪表技术.第207-4部分:时分多路复用铁路控制(线绕)

State of the railway vehicles - Control and instrumentation technology - Part 207-4: Time-division multiplex train control (wire-bound)

UIC OR 552-2005 火车用电源.火车线路的标准技术特性

Electrical power supply for trains-Standard technical characteristics of the train line

ANSI/IEEE 16:2004 轨道车辆的电气和电子控制器具标准

Prescribes design, application, and test requirements for electrical and electronic control apparatus on rail vehicles.

Standard for Electrical and Electronic Control Apparatus on Rail Vehicles

DIN EN 60310:2005 轨道交通.铁路车辆用牵引变压器和电感器

Railway applications - Traction transformers and inductors on board rolling stock (IEC 60310:2004); German version EN 60310:2004

BS EN 13129-2:2004 轨道交通.主干线铁路车辆用空调.型式试验

This document is applicable to main line railway vehicles that carry passengers, but excludes suburban, metro, tramway vehicles and driving cabs. This document specifies the comfort parameter measurement methods for compartments or saloons (double-decker or not). The comfort parameters and their tolerances referred to in this document are defined in EN 13129-1.

Railway applications. Air conditioning for main line rolling stock. Type tests

NF F41-020-4*NF EN 50123-4:2004 轨道交通.固定设备.直流开关装置.第4部分:室外直流隔离开关、负荷开关和接地开关

Railway applications - Fixed installations - D.C. switchgear - Part 4 : outdoor d.c. disconnectors, switch-disconnectors and earthing switches.

NF F41-020-5:2004 轨道交通.固定设备.直流开关装置.第5部分:直流系统专用电涌放电器和低电压限制器

Railway applications - Fixed installations - D.C. switchgear - Part 5 : surge arresters and low-voltage limiters for specific use in d.c. systems.

NF F41-020-7-3*NF EN 50123-7-3:2004 轨道交通.固定设备.直流开关装置.第7-3部分:直流牵引系统专用测量、控制和保护设备.独立式电压传感器和其他电压测量设备

Railway applications - Fixed installations - D.C. switchgear - Part 7-3 : measurement, control and protection devices for specific use in d.c. traction systems - Isolating voltage transducers and other voltage measuring devices.

DIN EN 50345:2004 轨道交通.固定装置.电力牵引.架空接触线路支撑用绝缘合成绳组件

Railway applications - Fixed installations - Electric traction - Insulating synthetic rope assemblies for support of overhead contact lines; German version EN 50345:2004

JIS E 6302:2004 铁路车辆用导电弓架

この規格は，架空電車線用の鉄道車両用パンタグラフ(以下，バンタグラフという。)の設計，製造及び製品の評価に関する一般的事項について規定する。また，絶縁がいしを除いたパンタグラフで行う試験についても規定する。この規格は，車両の屋根に取り付けたパンタグラフについて行う耐圧試験については，適用されない。

Pantographs for rolling stock

JIS E 6102:2004 铁路车辆用交流牵引电动机

1.1この規格は，電気駆動式鉄道用の電力変換装置によって給電される交流主電動機(以下，主電動機という。)に適用する。なお，鉄道車両用の補助電動機にも適用することができる。この規格の目的は，試験によって主電動機の性能を確認し，その規定された負荷に対する性能を評価し，かつ，他の主電動機との比較評価基準を規定することである。この規格に定めた内容以外の試験をIEC 61377に基づいて実施する場合，重複を避けるために，形式試験又は調査試験は，組合せ試験と同じ試験台で実施することが望ましい。

AC traction motors for rolling stock

JIS E 6401:2004 铁路车辆用电力电阻器

この規格は，鉄道車両の主回路及び高圧補助回路に使用するすべての電力形抵抗器(例えば，プレーキ用，暖房用，スナバ及びフィルタ用)について規定する。また，使用されている車両の回路及び車種に関係なく，適用する。これらの抵抗器は，一般的に開放構造で，汚染(じんあいなど)の多い環境で使用される。抵抗素子はグリッド，板，帯，リボン又は線形で構成する。

Power resistors for rolling stock