T21 传动系统 标准查询与下载

DIN ISO 7804:1987 商业用道路车辆.卡车动力输出装置的侧口. 与ISO 7804, 1985版相同

The standard lays down the dimensions of side openings for truck power take-offs. These specifications are applicable for all general installations of power take-offs on the transmission gear box of trucks and tractors where the size of transmission permits.

Commercial road vehicles; side openings for truck power take-offs; identical with ISO 7804, edition 1985

DIN ISO 7653:1986 道路车辆.商用车辆.动力输出装置(PTO)和辅助传动装置之间的偶合器.与 ISO 7653相同, 1985版((状况如同1986版)

The standard lays down the diemensions of couplings between powertake-offs (PTO) and ancillary driven units mounted on commercial vehicles, such as hydraulic-pumps, etc..

Road vehicles, commercial vehicles; couplings between power take-offs and ancillary driven units; identical with ISO 7653, edition 1985 (status as of 1986)

ISO 7707:1986 商用道路车辆 后置式动力输出装置(PTO)的连接

Specifies the essential dimensions of connections for rear-mounted power take-offs (type A, B and E). These specifications are applicable to all installations of power take-offs at the back of transmission gearboxes. Some figures illustrate shapes and reference quantities of concern.

Commercial road vehicles; Connections for rear-mounted power take-offs (PTO)

GJB 82-1986 车用液压传动绞盘

本标准适用于军用越野汽车和专用汽车装用的液压传动绞盘。

Hydraulic transmisson winch for vehicle.

ISO 7804:1985 商用道路车辆 载货车动力输出装置的侧口

Establishes the dimensions of side openings for truck power take-offs. These specifications are applicable for all general installations of power take-offs on the transmission gearbox of trucks and tractors where the size of the transmission permits. Some figures illustrate shapes and reference quantities of concern.

Commercial road vehicles; Side openings for truck power take-offs

BS 6613:1985 规定弹性联轴器特性的方法

Specifies the information to be supplied by users and manufacturers of resilient shaft couplings in order to facilitate communication and understanding between user and manufacturer. Does not give dimensional requirements for either shafts or couplings.

Methods for specifying characteristics of resilient shaft couplings

ISO 7653:1985 道路车辆 商用车辆 动力输出装置(PTO)和辅助传动组件之间的联结器

Establishes the dimensions of couplings mounted on commercial vehicles, such as hydraulic pumps, etc. Applies to ancillary equipment of commercial vehicles that require a hydraulic or mechanical power system and that take power of the main drive line of the vehicle. Defines two types of couplings: type A - indirect coupling; type B - direct coupling.

Road vehicles; Commercial vehicles; Couplings between power take-offs (PTO) and ancillary driven units

ISO 7706:1985 道路车辆 商用车辆 动力输出装置(PTO)的自由空间

Road vehicles; Commercial vehicles; Clearance envelope for power take-offs (PTO)

DIN 73011:1983 汽车.轿车变速齿轮箱的换档设置

Motor vehicles, gear lay-outs for manual transmissions in passenger cars Véhicules à moteur, Arrangements des vitesses pour les bo?tes de vitesse des véhicules particuliers

Motor vehicles; gear lay-outs for manual transmissions in passenger cars

DIN 74054-2:1977 汽车和挂车的挂结装置.不带套筒的挂车联结环40.尺寸

Coupling devices for trucks and trailers; trailer coupling ring 40 without socket; dimensions Herausgegeben im Einvernehmen mit dem Bundesminister für Verkehr.

Coupling devices for trucks and trailers; trailer coupling ring 40 without socket, dimensions

DIN 75532-1:1976 旋转运动的传动装置.第1部分:连接齿轮、中间齿轮、挠性驱动轴与装置的连接方式

Transmission of rotary motions; joinings types on gears, intermediate gears, driving shafts and implementsInhalt dieser Norm sind neben den Festlegungen der Formen von Anschlüssen an Getrieben, Zwischengetrieben, biegsamen Wellen und Ger?ten die vorwiege

Transmission of rotary motions; Types of connection to gears, intermediate gears, flexible drive shafts and equipment

DIN 74056:1976 安全联轴节.连接尺寸.销钉与保险装置

Breakdown coupling; connection dimensions, pin and securing

Breakdown coupling; connection dimensions, pin and securing

NF R12-401:1975 商用车辆.功率输出

COMMERCIAL VEHICLES - POWER TAKE-OFF

NF R15-508:1975 窄V形皮带用带槽皮带轮（剖面AV10和AV13）

Grooved pulleys for narrow vee-belts (AV 10 and AV 13 profiles).

DIN 74040:1975 牵引车和挂车的机械连接.挂车用牵引杆、互换性尺寸

Mechanical connections between towing vehicles and trailers; tow bar for traiter; interchangeability dimensions Liasions mécaniques entre camions et remorques; flèche de remorque; cotes d'interchangeabilité

Mechanical connections between towing vehicles and trailers; tow bar for trailer, interchangeability dimensions

NF R15-504:1972 汽车制造用梯形环形皮带.几何特性

Endless V belts-geometrical characteristics.

DIN 74050:1969 汽车和挂车的机械连接.国际交通运输中的互换尺寸

Mechanical connections for motor vehicles and their trailers; Dimensions for interchangeabiliry of international traficZusammenhang mit der ISO-Empfehlung ISO/R 1102-1969 siehe Erl?uterungen.

Mechanical connections for motor vehicles and their trailers; Dimensions for interchangeability of international traffic

JIS D 4304:1956 汽车离合器壳安装法兰的尺寸

Dimension of flanges to be fitted up clutch housing for automobiles

JIS D 2801:1969 汽车用离合器分离球轴承

Clutch release ball bearings for automobiles