U60 船舶电气、观通、导航设备综合 标准查询与下载

CB 1361-2002 假雷规范

本规范规定了鱼雷假雷(简称假雷)的要求、质量保证规定及交货准备。 本规范适用于假雷的设计、生产和产品交付。

Specification of dumb torpedo

CB 1366-2002 舰船用刮水器通用规范

本规范规定了舰船用刮水器的分类、要求、质量保证规定及交货准备等。 本规范适用于舰船驾驶室用扇形刮水器及舷窗用平移式刮水器的设计、生产和验收。

General specifications for ship windshield wiper

BS IEC 61363-1:2002 船舶和移动式及固定式近海装置的电气设施.三相交流短路电流计算程序

This International Standard outlines procedures for calculating short-circuit currents that may occur on a marine or offshore a.c. electrical installation. The calculation methods are for use on unmeshed three-phase alternating current systems, a) operating at 50 Hz or 60 Hz; b) having any system voltage specified in IEC 60092-201 table 2; c) having one or more different voltage levels; d) comprising generators, motors (both synchronous and asynchronous), transformers, reactor coils, cables, and converter units; e) having their neutral point connected to the ship's hull through an impedance (designed to limit the short-circuit current flowing to the ship's hull); f) having their neutral point isolated from the ship's hull. The calculation procedures are for a three-phase symmetrical short-circuit condition i.e. three-phase conductors shorted together, or shorted to the ship's hull and for which the short-circuit occurs on all three poles simultaneously. The calculation of short-circuit currents resulting from asymmetric short-circuit conditions can lead to higher aperiodic (d.c.) components of the short-circuit current and is not considered in this standard. The calculating formulae and methods described produce sufficiently accurate results to calculate the short-circuit current during the first 100 ms of a fault condition. They can be used to calculate the short-circuit current for periods longer than 100 ms when calculating on a bus system to which the generators are directly connected. For time periods beyond 100 ms the controlling effects of the system voltage regulators may be predominant. Calculations including the voltage regulator effects are not considered in this standard. The object of this standard is to present formulae for calculating short-circuit currents of the active components of an electrical system and to indicate how such formulae may be simplified when calculating the short-circuit current at various locations on the electrical system. The calculations give estimates of the prospective short-circuit current when the system's active components produce their maximum contribution. The calculating formulae are developed from basic electrical engineering theories relevant to the system components. To simplify the calculation methods yet retain an acceptable level of accuracy in the results, suitable assumptions are outlined and their effects on the calculation results indicated. This standard provides a calculation procedure. It gives guidance on the interpretation and application of simplifying formulae and the corresponding results when applied to the selection of switchgear. The standard is not intended to provide any other information other than the calculation of the short-circuit current which may flow in the network. In order to understand the methods, and consequences of the results, it is assumed that the person responsible for initiating the short-circuit current calculations, is thoroughly familiar with valid electrical engineering fundamentals.

Electrical installations of ships and mobile and fixed offshore units - Procedures for calculating short-circuit currents in three-phase a.c

IEC 60092-101:2002 船用电气装置.第101部分:定义和一般要求

Gives definitions and general requirements common to all apparatus and installations in ships.

Electrical installations in ships - Part 101: Definitions and general requirements

JIS F 9002 AMD 1:2002 造船.集成电桥系统的设计导则(修改件1)

Shipbuilding -- Guidelines for design of integrated bridge systems (Amendment 1)

JIS F 8080:2002 船舶的电气设备.第506部分:特殊性能.运载特别危险物品和只有运载散装材料才有危害性的船只

Electrical installations in ships -- Part 506: Special features -- Ships carrying specific dangerous goods and materials hazardous only in bulk

IEC 61892-1:2001 移动式及固定式近海装置 电气设施 第1部分：一般要求和条件

This part of IEC 61892 contains provisions for electrical installations in mobile and fixed units used in the offshore petroleum industry for drilling, production, processing and for storage purposes including pipeline, pumping or 'pigging' stations, compressor stations and exposed location single buoy moorings. It applies to all installations, whether permanent, temporary, transportable or hand-held, to a.c. installations up to and including 35 000 V and d.c. installations up to and including 1 500 V. This standard does not apply either to fixed equipment for medical purposes or to the electrical installations of tankers. NOTE For medical rooms see IEC 60364-7-710

Mobile and fixed offshore units - Electrical installations - Part 1: General requirements and conditions

IEC 60092-350:2001 船舶电气设施 第350部分：船用电力电缆 一般结构和试验要求

本规范的目的是给出低压集成电路不同分组的接口规范， 包括电源电压值、容差、和最坏情况下的输入、输出、电压极限值。 同时给出每类标称电源电压的两种接口规范：正常范围和宽范围。正常范围是依据工业标准制定的， 典型容差大约是10％。宽范围是扩展到一个较宽的范围， 可以使电池继续工作的实际值。

Electrical installations in ships - Part 350: Shipboard power cables - General construction and test requirements

IEC 60092-504:2001 船舶电气设施 第504部分：特项 控制和仪器仪表

This part of IEC 60092 deals with electrical, electronic and programmable equipment intended for control, monitoring, alarm and protection systems for use in ships.

Electrical installations in ships - Part 504: Special features; Control and instrumentation

BS EN 60092-507:2000 船用电气设备.游艇

Specifies requirements for the design, construction and installations in craft, of length 24m to 50m, for inland waters and sea.

Electrical installations in ships. Pleasure craft

IEC 61892-5:2000 移动式及固定式近海装置 电气设施 第5部分:移动装置

This part of IEC 61892 specifies the characteristics for electrical installations in floating units, for use during transfer from one location to another and for use during the exploration and exploitation of petroleum resources. NOTE Attention is drawn to further requirements concerning electrical installations on such mobile offshore units contained in the MODU CODE of the International Maritime Organization (IMO).

Mobile and fixed offshore units - Electrical installations - Part 5: Mobile units

DIN EN 61209:2000 海上导航和无线电通讯设备和系统.集成信桥系统(IBS).操作、性能要求、试验方法和要求的试验结果

The document specifies the minimum requirements for the design, manufacture, integration and testing of integrated bridge system (IBS) to comply with IMO resolution MSC 64.(67) annex 1 of the International Maritime Organization (IMO), and other relevant IMO performance standards, in order to meet the functional requirements contained in applicable IMO instruments, not precluding multiple usage of equipment and modules or the need for duplication.#,,#

Maritime navigation and radiocommunication equipment and systems - Integrated Bridge Systems (IBS) - Operational and performance requirements, methods of testing and required test results (IEC 61209:1999); German version EN 61209:1999

HJB 221-2000 舰艇作战指挥系统.维修性规范

本标准规定了舰艇作战指摊系统在论证、设计、试验、验收租使用绀护中的维修性的墓本技术要求。 本标准适用干侮军各类作战指恽系统是舰艇作战指挥系统研制与尘产各阶段的维修性不口维修保障要求的基本依据。

Maintainablity specification for ship combat command systems

IEC 60092-507:2000 船舶电气设施 第507部分:游艇

This part of IEC 60092 specifies requirements for the design, construction and installation of electrical systems in pleasure craft. It applies to pleasure craft for inland waters and to seagoing pleasure craft. The standard applies to the following types of electrical system in pleasure craft which have a length of 24 m to 50 m, or which have a gross registered tonnage not exceeding 500 grt: a) single-phase alternating current systems which operate at a nominal voltage not exceeding 250 V; b) three-phase alternating current systems which operate at a nominal voltage not exceeding 500 V; c) direct current systems which operate at a nominal voltage not exceeding 50 V. The standard also applies to three-phase alternating current systems which operate at a nominal voltage not exceeding 500 V, in pleasure craft which have a length of less than 24 m. NOTE 1 For alternating current systems having voltages exceeding 250 V single-phase or 500 V three-phase, and for direct current systems exceeding 50 V, and for craft larger than 500 grt or with a length greater than 50 m, other standards within the IEC 60092 series apply. NOTE 2 Attention is drawn to the Recreational Craft Directive 94/25/EC of the European Parliament and of the Council, dated 16 June 1994, NOTE 3 For pleasure craft less than 24 m in length, the following standards apply: - for direct current installations which operate at a nominal voltage not exceeding 50 V: ISO 10133; - for alternating current installations which operate at a nominal voltage not exceeding 250 V single-phase: ISO 13297.

Electrical installations in ships - Part 507: Pleasure craft

JB/T 56120-1999 船用低压电器产品质量分等

本标准规定了船用低压电器产品质量等级的划分、考核内容、抽检方法及检查细则等。 　　本标准适用于成批重复生产的各类型产品，用以正确、完整地衡量承制方产品的质量，作为产品分等定级的依据。 　　本标准不适用于一次性生产的各类型产品。

Quality classification of marine low-voltage electrical appliances

IEC 60533:1999 船舶电气和电子设施 电磁兼容性

This International Standard specifies minimum requirements for emission, immunity and perform-ance criteria regarding electromagnetic compatibility (EMC) of electrical and electronic equipment for ships. It assists in meeting the requirements of IMO resolution A.813 (see annex A). Equipment which is tested and installed in accordance with this standard meets the relevant IMO requirements. NOTE 1 The normative part of this standard has been prepared as a product family EMC standard. NOTE 2 Effects on human beings are not the subject of this standard. This standard further gives guidelines and recommendations on the measures to achieve EMC in the electrical and electronic installations of equipment groups: a) group A: radio communication and navigation equipment; b) group B: power generation and conversion equipment; c) group C: equipment operating with pulsed power; d) group D: switchgear and control systems; e) group E: intercommunication and signal processing equipment; f) group F: non-electrical items and equipment; g) group G: integrated systems. The basic EMC standard for groups A and C is IEC 60945. NOTE This standard does not specify unsafe operation and basic safety requirements such as protection against electric shock and dielectric tests for equipment.

Electrical and electronic installations in ships - Electromagnetic compatibility

IEC 60092-350/AMD2:1999 船用电气装置.第350部分:低压船用电力电缆.通用建造和试验要求.修改件2

Electrical installations in ships - Part 350: Low-voltage shipboard power cables - General construction and test requirements; Amendment 2

CB/T 3909-1999 船舶电气设备安装工艺

Installation technology of electrical equipment in ship

IEC 60092-359/AMD2:1999 船舶电气设施 第359部分:船用电力电缆和通信电缆用护套材料 修改2

This standard is Electrical installations in ships - Part 359: Sheathing materials for shipboard power and telecommunication cables; Amendment 2.

Electrical installations in ships - Part 359: Sheathing materials for shipboard power and telecommunication cables; Amendment 2

CB 1107-1999 水雷聚能起爆装置规范

本规范规定了水雷用聚能起爆装置的要求、质量保证规定、检验方法和交货准备等。 本规范适用于各型空、潜、舰布水雷所用起爆装置的设计、制造和现役水雷的改装。

Specification for mine shaped detonation device