V16 热加工工艺 标准查询与下载
共找到 309 条与 热加工工艺 相关的标准，共 21 页
This standard specifies an anaerobic polymerisable compound which polymerises upon the exclusion of oxygen and activation by oxygen and activation by a metal surface with a torque strength of 5 Nm and a viscosity of 500 mm2s-1.
Steel FE-PM44 Hardened and Tempered Bars D Less Than or Equal to 150 mm Aerospace Series Edition 1
- ICS
- 77.140.01
- CCS
- V16
- 发布
- 1977-08-01
- 实施
This list has been prepared for use by or for the Government in the procurement of products covered by the subject specification and such listing of a product is not intended to and does not connote indorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment 9f this list will be issued as necessary. The isting of a product does not kelease the supplier from compliance with the specification requirements, or publicity purposes is expressly forbidden. Sea Systems Command (OS).
COMPOUND, ASPHALTIC, HOT-MELT (CAVITY LINING)
- ICS
- 49.020
- CCS
- V16
- 发布
- 1976-09-30
- 实施
本标准规定了金属零件最终热处理和化学热处理(渗碳、氰化、氮化)的检验类别。 本标准适用于飞机、导弹、发动机及其附件等的零件。
Heat treatment parts inspection category
- ICS
- CCS
- V16
- 发布
- 1975-7-1
- 实施
- 1975-7-1
This list, has been prepared for use by or for the Government inth; procurement of products covered by the subject specification and such listing of* a product is mot. intended to and 'does not connote indoriscment ef the productcby the Departnient of Defense.
COMPOUND, ASPHALTIC, HIGH MELTING HOT-MELT (CAVITY LINING)
- ICS
- 49.020
- CCS
- V16
- 发布
- 1975-07-24
- 实施
This amendment forms a part of Military Specification MIL-C-82604(OS), dated 1 March 1973 and has been approved by the Naval Ordnance Systems Command, Department of the Navy.
COMPOUND, ASPHALTIC, HIGH MELTING HOT-MELT (CAVITY LINING)
- ICS
- 49.020
- CCS
- V16
- 发布
- 1973-09-12
- 实施
The asphaltic compound furnished under this specification shall be a product which meets all the requirements specified herein and has been listed on or approved for listing on the applicable qualified products list at the time set for opening of bids. A change in formulation in either materials or amounts of materials shall require requalification of the product.
COMPOUND, ASPHALTIC, HIGH MELTING HOT-MELT (CAVITY LINING)
- ICS
- 49.020
- CCS
- V16
- 发布
- 1973-03-01
- 实施
This amandment forms a part of )EUitarg specification M I L ( A E R ) ,23 Februarg 1950, and has been approved by the Bureau of Aeronautic8, Departinwit of the lavy.
COMPOUND, ASPHALTIC, HOT MELT (CAVITY LINING)
- ICS
- 49.020
- CCS
- V16
- 发布
- 1970-09-15
- 实施
1.1 This specification covers thermal insulating refractory castable mix for use as a back-up insulation for refractory furnace linings of boilers.
CASTABLE MIX, REFRACTORY, THERMAL INSULATING
- ICS
- 49.020
- CCS
- V16
- 发布
- 1962
- 实施
Agencies of the Department of Defense.
TEE JOINT SPECIMEN (COUPON) FOR THERMAL SHOCK TEST
- ICS
- 49.020
- CCS
- V16
- 发布
- 1953-01-05
- 实施
This specification covers sheathing paper for covering thermal insulation for cold piping or tubing prior to lagging.
PAPER, SHEATHING, FIRE-RESISTANT AND WATER- REPELLENT
- ICS
- 49.020
- CCS
- V16
- 发布
- 1951
- 实施
Fusion welding process of aerospace aluminium alloys
- ICS
- 49.040.10;25.160.10
- CCS
- V16
- 发布
- 实施
Regulations on the contents of the process system design documents Regulations on the contents of the documents submitted by the technology system professional
- ICS
- CCS
- V16
- 发布
- 实施
本文件叙述了航空结构钢适用的各种热处理工艺规范，工艺过程中应注意的问题，及对热处理设备与质量检验的有关要求。是指导工厂进行航空结构钢零件热处理生产的主要技术依据。
Heat Treatment of Aeronautical Structural Steel
- ICS
- CCS
- V16
- 发布
- 实施
本标准规定了可控氮基保护气氛热处理的工艺材料与气氛制备、设备与工装、工艺制度、工艺过程控制、质量控制及检验等有关要求。 本标准适用于航空用结构钢制件（含渗碳制件渗碳后）的可控氮基气氛保护淬火热处理，其它产品也可参照执行。
Controllable Nitrogen-Based Protective Atmosphere Heat Treatment
- ICS
- CCS
- V16
- 发布
- 实施
本标准规定了3J22、3J40和CoW25轴尖合金制件的热处理设备、工艺和质量控制。 本标准适用于航空电器仪表用轴尖合金制件的热处理。
Shaft tip alloy heat treatment process
- ICS
- CCS
- V16
- 发布
- 实施
本标准规定了变形铝合金零件热处理工艺、设备及质量控制要求。 本标准适用于飞机用各种变形铝合金零件的热处理。
Heat Treatment of Deformed Aluminum Alloy Parts
- ICS
- CCS
- V16
- 发布
- 实施
Copper and copper alloys and steel vacuum diffusion welding technical requirements
- ICS
- CCS
- V16
- 发布
- 实施
X-ray inspection film evaluation and typical image atlas of welding structure of fork-shaped ring of aerospace missile (arrow) body
- ICS
- CCS
- V16
- 发布
- 实施
本标准叙述航空辅机产品的干燥空气封存工艺方法。
Dry air storage technology for aviation auxiliary equipment products
- ICS
- CCS
- V16
- 发布
- 实施
本说明书规定了航空用高温合金管材、丝材、板金件、焊接组合件、棒材、锻件、盘形锻件、铸件及其半成品、成品的热处理工艺规范、设备控制、工艺控制、质量控制以及检验的有关要求。 本说明书作为航空工业部部标准，是指导部内工厂航空用高温合金及其制件热处理的主要技术文件。当图纸、专用规范或订货合同另有规定者除外。
Instructions for heat treatment process of superalloys for aviation
- ICS
- CCS
- V16
- 发布
- 实施
