V20 紧固件 标准查询与下载



共找到 6455 条与 紧固件 相关的标准,共 431

Stud - Straight, Waisted, .4375-14 X .4375-20UNF-3A

ICS
49.030.20
CCS
V20
发布
2013-07-09
实施

Nut, Self-Locking, Plate-2 Lug, Floating, Counterbored, UNS S66286

ICS
49.030.30
CCS
V20
发布
2013-06-27
实施

Nut, Self-Locking, Double Hexagon, AMS5709 (UNS N07001), 180 KSI

ICS
49.030.30
CCS
V20
发布
2013-06-27
实施

This procurement specification covers bolts and screws made from a corrosion and heat resistant age hardenable nickel base alloy of the type identified under the Unified Numbering System as UNS N07718. The following specification designations and their properties are covered: AS7467 185 ksi minimum ultimate tensile strength at room temperature; 145 ksi minimum ultimate tensile strength at 1200 degrees F; 100 ksi stress rupture strength at 1200 degrees F; AS7467-1 185 ksi minimum ultimate tensile strength at room temperature; 111 ksi minimum ultimate shear strength at room temperature. Primarily for aerospace propulsion system applications where a good combi

Bolts and Screws, Nickel Alloy, UNS N07718 Tensile Strength 185 ksi Stress Rupture Rated Procurement Specification

ICS
49.030.20
CCS
V20
发布
2013-06-27
实施

Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967 (UNS R56400) 160 KSI, .3125-24 UNJF-3A

ICS
49.030.20
CCS
V20
发布
2013-06-17
实施

Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967 (UNS R56400), 160 KSI, .5000-20 UNJF-3A

ICS
49.030.20
CCS
V20
发布
2013-06-17
实施

Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967 (UNS R56400), 160 KSI .3750-24 UNJF-3A

ICS
49.030.20
CCS
V20
发布
2013-06-17
实施

Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967 (UNS R46500) 160 KSI, .4375-20 UNJF-3A

ICS
49.030.20
CCS
V20
发布
2013-06-17
实施

Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967 (UNS R56400), 160 KSI, .5625-18 UNJF-3A

ICS
49.030.20
CCS
V20
发布
2013-06-17
实施

Aerospace series - Bolts in ultra high strength steels and Ni-Co-based alloys, nominal tensile strength 1 800 MPa - Technical specification

ICS
49.030.20
CCS
V20
发布
2013-05
实施

Aerospace series - Bolts, with MJ threads, in titanium alloys, strength class 900 MPa and 1 100 MPa - Technical specification

ICS
49.030.20
CCS
V20
发布
2013-05
实施

Bolt, Machine, Hexagon Head, Drilled, 6 Hole PD Shank, Steel AMS 6322, Cadmium Plated, .625-18 UNJF-3A

ICS
49.030.20
CCS
V20
发布
2013-04-22
实施

This SAE standard covers the dimensional and general specifications, including performance requirements, for carbon steel self-drilling tapping screws suitable for use in general applications. It is the objective of this standard to insure that carbon steel self- drilling tapping screws, by meeting the mechanical and performance requirements specified, shall drill a hole and form or cut mating threads in materials into which they are driven without deforming their own thread and without breaking during assembly. Appendix A is included to provide a recommended technique for measuring the case depth on the screws.

Steel Self-Drilling Tapping Screws

ICS
21.060.10
CCS
V20
发布
2013-04-16
实施

This specification covers vulcanized sheet made of granulated cork uniformly dispersed in a synthetic rubber compound, for use in gaskets where aromatic fuel or oil resistance is required.

Cork and Rubber Composition Sheet; For Aromatic Fuel and Oil Resistant Gaskets

ICS
49.025.99
CCS
V20
发布
2013-04-12
实施

This test procedure is intended to provide a quality control method for checking torque-tension characteristics of non-prevailing torque type threaded steel fasteners 6 through 24 mm nomial diameters. Realistically, torque- tension relationships for specific individual fastener assembly joints will vary due to the different joint parameters. Tests using actual joint components will be required to determine accurate torque-tension values for those conditions. For the inch series version, see SAE J174.

Torque-Tension Test Procedure for Steel Threaded fasteners Metric Series

ICS
21.060.01
CCS
V20
发布
2013-04-11
实施

This test procedure is intended to provide a quality control method for checking torque-tension characteristics of non-prevailing torque type threaded steel fasteners 1/4 through 1 in nomial diameters. Realistically, torque-tension relationships for specific individual fastener assembly joints will vary due to the different joint parameters. Tests using actual joint components will be required to determine accurate torque-tension values for those conditions. For the metric version, see SAE J174M.

Torque-Tension Test Procedure for Steel Threaded Fasteners Inch Series

ICS
21.060.10
CCS
V20
发布
2013-04-11
实施

Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Nickel Alloy, UNS N07718, 185 KSI MIN,.5625-18 UNJF-3A

ICS
49.030.20
CCS
V20
发布
2013-04-02
实施

Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, AMS 4967, (TI 6AL 4V),1900-32 UNJF-3A

ICS
49.030.20
CCS
V20
发布
2013-04-01
实施

Bolt, Tee Head - Chamfered AMS 5708 (UNS N07001), 165 KSM MIN UTS .1900-32 UNJF-3A

ICS
49.030.20
CCS
V20
发布
2013-03-28
实施

Bolt, Tee Head - Chamfered, PD Shank Nickel Alloy (UNS N07001), 165 KSI MIN UTS, .3750-24 UNJF-3A

ICS
49.030.20
CCS
V20
发布
2013-03-28
实施



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号