V20 紧固件 标准查询与下载

SAE AS3234A-2013 T字形螺栓 最小165 KSI倒棱PD轴镍合金(UNS N07001) 3125-24 UNJF-3A

Bolt, Tee Head - Chamfered, PD Shank Nickel Alloy (UNS N07001), 165 KSI MIN UTS .3125-24 UNJF-3A

SAE AS3235C-2013 丁字头螺栓.3750-24 UNJF-3A最小165 ksi的UNS N07001倒角防锈钢(CRES)

Bolt, Tee Head - Chamfered, PD Shank Nickel Alloy (UNS N07001), 165 KSI MIN UTS, .3750-24 UNJF-3A

SAE AMS-DTL-22499A-2013 层压衬垫

This specification covers the requirements for surface bonded laminated shim stock.

Shim Stock, Laminated

SAE AS9947A-2013 镀镉AMS 6322钢制全杆双六角头扩展垫圈头机器螺栓.5625-18 UNJF-3A

Bolt, Machine - Double Hexagon Extended Wahser Head, Full Shank, Steel AMS 6322, Cadmium Plated, .5625-18 UNJF-3A

SAE AS222B-2013 法兰.双螺栓排气

This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.

Flange - Two-Bolt Exhaust

SAE AS9705C-2013 钻孔耐腐蚀耐高温镍合金机械双精度六角扩充垫圈头螺栓.1900-32 UNJF-3A

Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Corrosion and Heat Resistant Nickel Alloy, .1900-32 UNJF-3A

SAE AS3253C-2013 耐蚀钢镀银PD柄钻孔机械式双内六角扩展垫圈头螺栓,UNS N07718, 185 KSI MIN,.3750-24 UNJF-3A

Scope is unavailable.

Bolt, Machine-Double Hex Extended Washer Head, Drilled, PD Shank, Silver Plated, CRES, UNS N07718, 185 KSI MIN,.3750-24 UNJF-3A

SAE AS3255C-2013 耐蚀钢镀银PD柄钻孔双机械六角形扩展垫圈头螺栓,UNS N07718, 185 KSI MIN,.5000-20 UNJF-3A

Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, CRES, UNS N07718, 185 KSI MIN,.5000-20 UNJF-3A

SAE AS4691F-2013 运行中的留用螺母减径管短非扩口和非扩口三通装配总成

Fitting Assembly, Tee, Flareless and Short Flareless, Reducer, Retained Nut on Run

SAE AS4694B-2013 短非扩口盖,空心端,盖形螺母装配总成

Scope is unavailable.

Fitting Assembly, Cap, Hollow End, Acorn, Short Flareless

SAE AS7471F-2013 采购规格耐腐蚀耐高温拉伸强度165 ksi,UNS N07001镍合金螺栓和螺丝

This procurement specification covers bolts and screws made from a corrosion and heat resistant, age hardenable nickel base alloy of the type identified under the Unified Numbering System as UNS N07001. The following specification designations and their properties are covered: AS7471 165 ksi minimum ultimate tensile strength at room temperature; 75 ksi stress-rupture strength at 1350 °F; and AS7471-1 165 ksi minimum ultimate tensile strength at room temperature; 99 ksi minimum ultimate shear strength at room temperature. Primarily for aerospace propulsion system applications where a good combination of tensile strength, and resistance to relaxation at eleva

Bolts and Screws, Nickel Alloy, UNS N07001 Tensile Strength 165 ksi, Corrosion and Heat Resistant Procurement Specification

SAE AS9559D-2013 耐蚀和耐热机械双六角形扩展垫圈头钢制螺栓UNS S66286, UTS 130 KSI MIN, .3750-24 UNJF-3A

Bolt, Machine-Double Hexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, UNS S66286, UTS 130 KSI MIN, .3750-24 UNJF-3A

SAE J82-2013 机械螺钉的机械性能和质量要求

This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This SAE Standard covers the mechanical and quality requirements for two grades of carbon steel, slotted and recessed, 82 degree flat countersunk, 82 degrees oval countersunk, pan, fillister, hex, and hex washer head machine screws in sizes No. 4 through 3/4 in for use automotive and related industries. The dimensions of these screws are covered in ASME B18.6.3.

Mechanical and Quality Requirements for Machine Screws

HB 20135-2012 带沉头窝的GH4738 MJ螺纹十二角自锁螺母

本标准规定了使用温度不高于730℃,强度等级为1210MPa的带沉头窝的GH4738 MJ螺纹十二角自锁螺母,(以下简称螺母)的结构和尺寸。本标准适用于机械连接。

Nut, self-locking double hexagon, counterbored, MJ thread, GH4738

HB 20133-2012 GH4738 MJ螺纹十角自锁螺母

本标准规定了使用温度不高于730℃,强度等级为1210MPa的GH4738 MJ螺纹十角自锁螺母(以下简称螺母)的结构和尺寸。本标准适用于GH4738 MJ螺纹十角自锁螺母。

Nut, self-locking, decagon, MJ thread, GH4738

HB 20130-2012 发动机用74°锥面和球面连接螺母

本标准规定了发动机导管74°连接用螺母(下称螺母)的设计方法。本标准适用于发动机外部管路74°锥面或球面连接螺母设计。

74°cone or spherical surface tube connection nut for engine

HB 20129-2012 发动机用管接头或管嘴的拧入端

本标准规定了航空发动机用管接头或管嘴的拧入端设计要求。本标准适用于工作压力不大于28MPa的航空发动机用导管连接接头和管嘴的设计。

Screwed-onto end of the fitting or ferrule for engine

HB 20132-2012 带凸缘不带收口段的GH4738 MJ螺纹六角自锁螺母

本标准规定了使用温度不高于730℃,强度等级为1210MPa的带凸缘不带收口段的GH4738MJ螺纹六角自锁螺母(以下简称螺母)的结构和尺寸。本标准适用于MJ螺纹带凸缘不带收口段的材料为GH4738的六角自锁螺母。

Nut, self-locking, flanged, hexagon, MJ thread, GH4738

HB 20131-2012 发动机用60°球面连接阳端头

本标准规定了航空发动机用60°球面导管连接阳端头的设计要求。本标准适用于工作压力不大于28MPa的航空发动机用60°球面导管连接阳端头的设计。

Male end of the 60° spherical surface connection for engine

SAE AS9638A-2013 钛PD柄机械双六角头螺栓AMS 4967 (uns r56400), .500-20 UNFJ-3A

Bolt, Machine - Hexagon Head, PD Shank, Titanium AMS 4967 (uns r56400), .500-20 UNFJ-3A