W56 毯类 标准查询与下载

BS EN ISO 10580:2012 弹性织物和层压地板覆盖物.挥发性有机化合物(VOC)释放的试验方法

Resilient, textile and laminate floor coverings. Test method for volatile organic compound (VOC) emissions

BS EN 15825:2010 纺织品地板覆盖物.机织无软绒面地毯和长地毯的分类

This European Standard specifies the requirements for machine-made rugs and runners without pile, including a classification for domestic use according to use intensity and luxury. This European Standard is not applicable to hand-knotted rugs, barrier mats, bathroom rugs.

Textile floor coverings - Classification of machine-made rugs and runners without pile

BS EN 14085:2010 弹性地板覆盖物.非固定铺设用预制装配式楼板块的规范

This European Standard specifies requirements and test methods for floor panels, which have surface layers consisting of resilient floor covering. The floor panels are considered suitable for domestic and commercial levels of use. This European Standard is not applicable to floor panels that are subject to frequent wetting, such as bathrooms, laundry rooms and saunas. This European Standard also specifies the requirements for marking and packaging.

Resilient floor coverings - Specification for floor panels for loose laying

ASTM D5684-10 毛绒地毯相关的标准术语

1.1 This terminology is a compilation of all terminology developed by Subcommittee D13.21 on Pile Floor Covering. 1.2 This terminology is unique to the pile floor covering industry. Meanings if the same terms used outside the industry can be found in other compilations or in other dictionaries of general usage. 1.3 In addition to being a specialized dictionary, D5684 is also useful for managing the Terminology of the Subcommittee. 1.4 Terms listed under the jurisdiction of Subcommittee D13.21. 1.5 For definitions of other textile terms see Terminology D123. 1.6 This terminology is a compilation of all terminology developed by Subcommittee D13.21 on Pile Floor Covering.

Standard Terminology Relating to Pile Floor Coverings

ANSI/NSF 332(i2 rev 3)-2010 回弹地板覆盖物用持续性评价

Sustainability Assessment for Resilient Floor Coverings

ASTM D6719-10 绒头纱线地板覆盖物评估的标准试验方法和做法的标准指南

This guide is useful to select test methods and or practices that are commonly used in industry for evaluating pile yarn floor covering. Refer to the particular test method or practice cited for the property of interest for significance and use statements.1.1 This guide provides users with an index of procedures in the form of test methods, practices, and related documents that are currently used in industry for determination of properties of pile yarn floor covering. This guide is not considered as all-inclusive for testing procedures related to pile yarn floor covering. 1.1.1 It is the responsibility of the user to choose from this guide those procedures that provide test information on properties of interest for pile yarn floor covering that relate to its physical and esthetic properties and performance. 1.1.2 Procedures for particular properties appear in the following sections:

Standard Guide for Standard Test Methods and Practices for Evaluating Pile Yarn Floor Covering

ASTM D4151-10 毯子的易燃性的标准试验方法

This test method for the determination of the flammability of blankets is considered satisfactory for acceptance testing of commercial shipments of blankets since this test method has been used extensively in the trade for acceptance testing. This test method is used to evaluate electric blanket fabric, but tests should be performed on the fabric itself without the resistance heating wires inserted. All fabrics made of natural or regenerated cellulose, as well as many made from other natural or synthetic fibers, are combustible. Some combustible fabrics when used for blankets are potentially dangerous to the user because of the ease of ignition, rapidity, and intensity of burning. The first characteristic can be judged with the aid of the flammability tester.1.1 This test method provides a means to identify blanket fabrics which ignite easily and propagate flame across the surface. 1.2 This test method specifies the procedures described in the “Voluntary Blanket Flammability Standard” which has been used by the blanket industry in the United States since 1972. 1.3 This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products or assemblies under actual fire conditions. Note 18212;This test method is not identical to 16 CFR Part 1610, Flammability of Clothing Textiles. Consumer Product Safety Commission regulations require that fabrics introduced into commerce meet the requirements of 16 CFR Part 1610. 1.4 Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these tests. 1.5 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Flammability of Blankets

ANSI/NSF 140(i11)-2010 地毯持久性评估

Sustainability Assessment for Carpet

ANSI/NSF 140(i9)-2010 可持续性地毯评定

Sustainable Carpet Assessment

ANSI/NSF 140-2010 NSF/ANSI 140.可持续性地毯评定

Issue 9 - revise the definition of renewable energy in 3.14

NSF/ANSI 140 - Sustainable Carpet Assessment

ASTM D5848-10e1 绒头纱线铺地材料的单位面积质量的标准试验方法

The determination of the mass per unit area of pile yarn floor covering is useful in quality and cost control during the manufacture of pile floor covering. Both appearance and performance may be affected by changes in mass per unit area. In case of a dispute arising from differences in reported test results when using this test method for acceptance testing of commercial shipments, the purchaser and supplier should conduct comparison testing to determine if there is a statistical bias between their laboratories. Competent statistical assistance is recommended for the investigation of bias. As a minimum the two parties should take a group of test specimens that are as homogeneous as possible and that are from a lot of material of the type in question. The test specimens should then be randomly assigned to each laboratory for testing. The average results from the two laboratories should be compared using Student's t-test for unpaired data and an acceptable probability level chosen by the two parties prior to testing. If a bias is found, either its cause must be found and corrected or the purchaser and supplier must agree to interpret future test results with consideration to the known bias. 1.1 This test method covers the measurement of mass per unit area of machine-made woven, knitted, and tufted pile yarn floor covering both before and after an adhesive-back coating application. 1.2 This test method encompasses three techniques for determination of mass per unit area as applicable: 1.2.1 Section 7, for determining total mass per unit area, applies to both coated and uncoated (unfinished) pile floor coverings. 1.2.2 Section 8, for determining component mass per unit area, applies only to uncoated (unfinished) pile yarn floor coverings. 1.2.3 Section 9, for determining pile yarn mass per unit area, applies only to back-coated, or finished, pile yarn floor coverings. 1.3 Determination of mass per unit area of pile yarn floor coverings was previously contained within Test Methods . For user convenience, Subcommittee D 13.21 subdivided Test Methods into separate standards, of which this test method is one. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in 9.5.

Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings

KS K ISO 24346:2009 弹力铺地织物.测定总厚度

이 표준은 탄성 바닥재의 전체 두께를 측정하는 방법에 대하여 규정한다.

Resilient floor coverings－Determination of overall thickness

KS K ISO 24337:2009 层状铺地织物.测定几何特征

이 표준은 (제약이 없는) 독립적 형태로 제조된 적층 바닥재의 두께, 길이, 폭, 직각도,

Laminate floor coverings-Determination of geometrical characteristics

KS K ISO 24334:2009 叠层板材覆盖物.测定机械装配板的结合牢度

이 표준은 수직 및 수평의 기계적인 연결 시스템으로 조립되는 적층 바닥재 패널들의 연결부에

Laminate floor coverings-Determination of locking strength for mechanically assembled panels

KS K ISO 24339:2009 叠层板材和纺织地板覆盖物.经受潮及干燥气候条件后尺寸变化的测定

이 표준은 적층 및 섬유 바닥재의 보통의 건ㆍ습 기후 상태의 노출에 대한 저항성을 측정하기

Laminate and textile floor coverings-Determination of dimensional variations after exposure to humid and dry climate conditions

SANS 63:2009 毯子

Covers thirteen types of woven blankets, twelve with a raised finish and one of a cellular type.

Blankets

ISO 24011:2009 弹性地板铺装.普通和装饰油毡规范

Resilient floor coverings - Specification for plain and decorative linoleum

ISO 4918:2009 弹性铺地物,纺织铺地物和层压板铺地物.脚轮椅试验

Resilient, textile and laminate floor coverings - Castor chair test

KS K ISO 2916:2009 羊毛.碱含量的测定

이 표준은 봉제 심(seam)에 대해 수직으로 힘이 가해질 때 심의 최대하중을 측정하는 절

Wool－Determination of alkali content

KS K ISO 2915:2009 羊毛.用纸电泳法和比色法测定羊毛水解产物中磺基丙氨酸含量

이 표준은 종이 전기영동 및 비색분석을 사용해서 양모 가수분해물의 시스테인 산 함량을 측정

Wool－Determination of cysteic acid content of wool hydrolysates by paper electrophoresis and colorimetry