W96 针织、纺织制品机械与器具 标准查询与下载
共找到 142 条与 针织、纺织制品机械与器具 相关的标准，共 10 页
This International Standard establishes a vocabulary and system of classification for weaving machines used in the textile industry for the production of woven fabrics by the weaving technique, i.e. by the interlacing of two (or more) systems of parallel threads, and machines with hybrid forming methods. NOTE 1 In addition to terms used in English and French, two of the three official ISO languages, this International Standard gives the equivalent terms in German; these are published under the responsibility of the member body for Germany (DIN). However, only the terms and definitions given in the official languages can be considered as ISO terms and definitions. NOTE 2 The illustrations are intended solely to clarify the terms, and are not intended in any way to indicate the sole or generally customary configuration.
Textile machinery and accessories - Flatbed knitting machines - Vocabulary
- ICS
- 01.040.59;59.120.40
- CCS
- W96
- 发布
- 2005-07
- 实施
この規格は，織機用フラットへルドについて規定する。
Flat Healds for Looms
- ICS
- 59.120.30
- CCS
- W96
- 发布
- 2005-03-20
- 实施
Rules for the inspection of textile machinery for import-Socks knitting machine
- ICS
- CCS
- W96
- 发布
- 2004-06-01
- 实施
- 2004-12-01
The standard specifies the usual number of needles for single face," double face and ""links-links"" circular knitting machines of large nominal diameter in terms of the needle pitch or gauge E and the machine nominal diameter; it may be used as a basis for the comparison of fabrics knitted on these machines.#",,#
Textile machinery - Knitting machines - Number of needles for circular knitting machines of large nominal diameter (ISO 8122:2003)
- ICS
- 59.120.40
- CCS
- W96
- 发布
- 2004-04
- 实施
이 규격은 섬유 산업에서 사용되는 편성 기계의 관련 용어 목록과 분류법을 규정한다. 이
Textile machinery and accessories-Knitting machines-Classification and vocabulary
- ICS
- 59.120.40
- CCS
- W96
- 发布
- 2004-02-14
- 实施
- 2004-02-14
Textile machinery - Knitting machines - Nominal diameters of circular machines (ISO 8117:2003)
- ICS
- 59.120.40
- CCS
- W96
- 发布
- 2003-11
- 实施
This International Standard defines terms related to harnesses for Jacquard weaving machines used in the textile industry, with the aim of presenting a standardized, prescribed phraseology. It identifies the parts of, and positions on, the harness and establishes a nomenclature for those parts. Excepting special cases, the Jacquard machine is positioned such that the centre of hook insertion for the fully equipped Jacquard machine corresponds to — the centre of drawing-in width in weft direction (see definition 7), and — the centre of comberboard depth, drawing in warp direction (see definition 6). Where there are special rules for the manufacture of a harness, a hook distribution plan is necessary. NOTE In addition to terms given in the two official ISO languages (English and French), this International Standard gives the equivalent terms in German, under the responsibility of the member body for Germany (DIN). However, only the terms and definitions given in the official languages can be considered as ISO terms and definitions.
Textile machinery and accessories - Harnesses for Jacquard weaving machines - Vocabulary
- ICS
- 01.040.55;01.040.59;59.120.30
- CCS
- W96
- 发布
- 2003-07-17
- 实施
- 2003-07-17
This International Standard defines terms related to harnesses for Jacquard weaving machines used in the textile industry, with the aim of presenting a standardized, prescribed phraseology. It identifies the parts of, and positions on, the harness and establishes a nomenclature for those parts. Excepting special cases, the Jacquard machine is positioned such that the centre of hook insertion for the fully equipped Jacquard machine corresponds to — the centre of drawing-in width in weft direction (see definition 7), and — the centre of comberboard depth, drawing in warp direction (see definition 6). Where there are special rules for the manufacture of a harness, a hook distribution plan is necessary. NOTE In addition to terms given in the two official ISO languages (English and French), this International Standard gives the equivalent terms in German, under the responsibility of the member body for Germany (DIN). However, only the terms and definitions given in the official languages can be considered as ISO terms and definitions.
Textile machinery and accessories - Harnesses for Jacquard weaving machines - Vocabulary
- ICS
- 01.040.55;01.040.59;59.120.30
- CCS
- W96
- 发布
- 2003-07
- 实施
This International Standard specifies the usual number of needles for single-face, double-face and "links-links" circular knitting machines of large nominal diameter, in terms of the needle pitch or gauge E and the machine nominal diameter, and is able to be used as a basis for the comparison of fabrics knitted on these machines. It is not applicable to circular knitting machines with a selection of single needles.
Textile machinery - Knitting machines - Number of needles for circular knitting machines of large nominal diameter
- ICS
- 59.120.40
- CCS
- W96
- 发布
- 2003-06-25
- 实施
- 2003-06-25
This International Standard specifies the usual number of needles for single-face, double-face and "links-links" circular knitting machines of large nominal diameter, in terms of the needle pitch or gauge E and the machine nominal diameter, and is able to be used as a basis for the comparison of fabrics knitted on these machines. It is not applicable to circular knitting machines with a selection of single needles.
Textile machinery - Knitting machines - Number of needles for circular knitting machines of large nominal diameter
- ICS
- 59.120.40
- CCS
- W96
- 发布
- 2003-06
- 实施
This International Standard specifies the nominal diameters of circular knitting machines and the numerical designations corresponding to the size of the machines. It is applicable to small- and large-diameter circular knitting machines and to sinker machines.
Textile machinery - Knitting machines - Nominal diameters of circular machines
- ICS
- 59.120.40
- CCS
- W96
- 发布
- 2003-02
- 实施
本标准规定了纬编机用积极输纱器的基本参数、技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于储存式积极输纱器和氨纶输纱器.
Positive yarn feed device for the weft knitting machine
- ICS
- 59.120.40
- CCS
- W96
- 发布
- 2000-05-23
- 实施
- 2000-07-01
本标准规定了针织横机针床的基本参数与技术要求。 本标准适用于针织横机用针床。
Flatbed knitting machines.General technic rule for needle bed
- ICS
- 59.120.40
- CCS
- W96
- 发布
- 1999-11-19
- 实施
- 1999-12-01
本标准规定了经编用槽针产品分类、技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于经编用钢片、钢丝槽针。
Grooved needle for warp knitting machine
- ICS
- 59.120.40
- CCS
- W96
- 发布
- 1999-11-19
- 实施
- 1999-12-01
Textile machinery and accessories - Latch-type needles for knitting machines - Coordination of shank widths and hook heights (ISO 11825:1995)
- ICS
- 59.120.40
- CCS
- W96
- 发布
- 1999-11
- 实施
本标准规定了提花经编机的型式、主要参数、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于提花单针床经编机。
Jacquard warp knitting machine
- ICS
- 59.120.40
- CCS
- W96
- 发布
- 1997-03-29
- 实施
- 1997-05-01
Defines basic terms relating to yarn feeders for knitting machines.
Textile machinery and accessories - Yarn feeders for knitting machines - Vocabulary
- ICS
- 01.040.59;59.120.40
- CCS
- W96
- 发布
- 1996-12
- 实施
この規格は，家庭用編機の部品及び操作の用語について規定する。
Nomenclature of hand knitting machine
- ICS
- 01.040.59;59.120.40
- CCS
- W96
- 发布
- 1995-11-01
- 实施
Specifies appropriate dimensions for shank widths and hook heights of latch needles used in the knitting industry.
Textile machinery and accessories - Latch-type needles for knitting machines - Coordination of shank widths and hook heights
- ICS
- 59.120.40
- CCS
- W96
- 发布
- 1995-10
- 实施
本标准规定了单针筒提花袜机的规格、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于织造套口或橡口的提花花型，并可兼备横调线、夹底加固等装里的双系统或三系统的提花袜机。
Single cylinder jacquard socks machine
- ICS
- 59.120.40
- CCS
- W96
- 发布
- 1995-01-24
- 实施
- 1995-01-24
