硅、锰、磷、铬、镍、钨 标准查询与下载
共找到 150 条与 硅、锰、磷、铬、镍、钨 相关的标准，共 10 页
本标准规定了铬镍钨钢中硅、锰、磷、铬、镍、钨含量的波长色散X射线荧光光谱测定方法。本标准适用于铬镍钨钢中硅、锰、磷、铬、镍、钨含量的测定，测定范围见表1
Determination of silicon,manganese,phosphorus,chromium,nickel and tungsten in chrome-nickel-tungsten steel.Wave-length dispersive X-ray fluorescence spectrometry
本标准规定的合金钢指不锈钢、高温合金钢和耐热合金钢。 本标准规定了测定合金钢中铬、镍、硅、锰、铝、磷、钨、钼、钴、钒含量的电感耦合等离子体发射光谱分析方法(ICP-OES)。 本标准适用于合金钢中铬、镍、硅、锰、铝、磷、钨、钼、钴、钒含量的测定，各元素的测定范围见表1
Determination of chromium, nickel, silicon, manganese, aluminium, phosphorus, tungsten, molybdenum, cobalt, vanadium content in alloy steel.Inductively coupled plasma atomic emission spectrometric method
Determination of silicon, chromium, manganese, phosphorus, molybdenum, nickel, titanium, vanadium, tungsten, copper, aluminum, antimony in pig iron by inductively coupled plasma emission spectrometry
Determination of silicon, iron, phosphorus, boron, chromium, nickel, tungsten, copper, manganese and molybdenum content in vanadium-aluminum alloys by inductively coupled plasma atomic emission spectrometry
Zpracovatel: POLDI- Spojené ocelárny, Kladno, I?O 011 070 - Marie Mel?ová Oborové normaliza?ní st?edisko: V?zkumn? ustav hutnictví ?eleza, státn
Nickel-Manganese-Silicon-Chromium steel 16 532
Standard Specification for Nickel-Chromium-Molybdenum-Niobium Alloy, Nickel-Chromium-Molybdenum-Silicon Alloy, and Nickel-Chromium-Molybdenum-Tungsten Alloy Rod and Bar
1.1 This specification covers wrought alloy UNS N06333 in the form of hot-finished and cold-finished bars and flats intended for heat resisting
Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Bar
本标准规定了用波长色散x-射线荧光光谱法测定镍、硅、磷、锰、钴、铬和铜的含量。 本方法适用于电炉、感应炉、转炉等铸态或锻轧镍铁的测定
Ferronickel.Determination of nickel,silicon,phosphorus,manganese,cobalt,chromium,and copper contents.Wavelength dispersive X-ray fluorescence spectrometry(Routine method)
Zpracovatel: POLDI — Spojené ocelárny, národní podnik, Kladno Oborové normaliza?ní st?edisko: V?zkumn? ústav hutnictví ?eleza, Dobrá Pracovník
Mn-Cr-W-V Steel 19 314
Zpracovatel: POLDI—Spojené ocelárny, národní podnik, Kladno: Vojtěch Chvála Oborové normaliza?ní st?edisko: V?zkumn? ústav hutnictví ?eleza, Dobr
Mn-Cr-W-V Steel 19 315
Zpracovatel: POLDI - Spojené ocelárny, národní podnik, Kladno Pracovník ??adu pro normalizaci a mě?ení: Ing. Vladimír Ho?ek
Mn-Cr-W-V Steel 19 314
STEEL-VALVE Chromium-Nickel-Tungsten
本标准规定了铬锰钨系抗磨铸铁件的产品牌号、技术要求、试验方法、检验规则、标志、贮存、包装和运输等要求。 本标准适用于冶金、建材、电力等行业在磨料磨损条件下使用的抗磨铸铁件
Cr-Mn-W series of abrasion resistant iron castings
British Standard: Aerospace Series Specification for Cobalt base chromium-nickel-tungsten alloy castings (Cr 25.5, Ni 10.5, W 7.5
Specification for cobalt base chromium-nickel-tungsten alloy castings (Cr 25.5, Ni 10.5. W 7.5)
本标准规定了铬锰钛钢中硅、锰、磷、铬、钛含量的波长色散X射线荧光光谱测定方法。本标准适用于铬锰钛钢中硅、锰、磷、铬、钛含量的测定，测定范围见表1
Determination of silicon,manganese,phosphorus,chromium and titanium in chrome-manganese-titanium steel.Wave dispersive X-ray fluorescence spectrometry
