共找到 139 条与 其他 相关的标准,共 10 页
Engineering data handover specification for power transmission and transformation
本文件规定了燃煤电厂袋式除尘器滤袋全寿命周期管理的总体要求、选型、生产监造、滤袋验收、运行维护、寿命评估和更换及报废的技术要求。 本文件适用于燃煤电厂袋式除尘器和电袋复合除尘器滤袋。
Technical Guidelines for Full Life Cycle Management of Bag Dust Collector in Coal-fired Power Plants
本文件规定了仓泵进、出料阀的规范性引用文件、术语和符号、技术要求、选型、试验、标志、防腐、包装、运输、储存以及安装、调试、检修维护等方面的要求。 本文件适用于正压气力输送系统中的仓泵进料阀和出料阀,工作压力为0-0.8MPa、输送物料的温度0-400℃,公称通径不大于DN300。气力输送系统气固混合物管道上的其它阀门也可参照执行。
Silo pump inlet and outlet valves
本文件规定了电站配管的设计、制作加工、质量要求、检验方法、检验规则、表面清理与防护、标记、包装、贮存等要求。 本文件适用于火力发电厂钢制汽水管道配管。火电厂其他钢制管道及核电站常规岛钢制汽水管道配管可参照使用。
Power station piping
本文件规定了电厂用水处理设备验收的检验方法及技术要求。 本文件适用于电厂用过滤器、离子交换器、除碳器、贮存计量设备、水箱和膜装置框架等钢制水处理设备的验收。
Acceptance Guidelines for Water Treatment Equipment in Thermal Power Plants
本文件规定了静止同步串联补偿器控制保护系统(简称为控制保护系统)的通用要求,控制系统、保护系统、监控系统、通信与接口和试验等要求。 本文件适用于220kV及以上电压等级电网中的静止同步串联补偿器的控制保护系统,其他电压等级可参照执行。
Static synchronous series compensator Part 4: Technical specifications for control and protection systems
本文件规定了塑钢复合电缆导管(以下简称为“导管”)的产品的分类、标记、导管结构和连接方式、技术要求、试验方法、检验规则、抽样、判定规则等要求。 本文件适用于塑钢复合电缆导管。
Technical conditions for power cable conduits Part 8: Plastic steel composite cable conduits
本文件规定了绝缘油介质损耗因数及体积电阻率测试仪(以下简称“测试仪”)的技术要求、试验方法、检验规则、标志和随行文件、包装、运输和贮存的要求。 本文件适用于测试仪的生产和检验,绝缘油介质损耗因数测试仪、绝缘油体积电阻率测试仪的生产和检验可参照使用。
General technical conditions for high voltage testing equipment Part 14: Insulating oil dielectric loss factor and volume resistivity tester
本文件规定了非开挖用塑料电缆导管(以下简称为“导管”)的产品分类、标记和连接方式、技术要求、试验方法、检验规则、抽样、判定规则等要求。 本文件适用于聚氯乙烯( PVC )、高密度聚乙烯( HDPE )及改性聚丙烯( MPP )三种类型的非开挖施工用电缆导管。
Technical conditions for power cable conduits Part 7: Plastic cable conduits for trenchless use
本文件规定了实壁类塑料电缆导管(以下简称为“导管”)的产品分类、标记、导管结构和连接方式、技术要求、试验方法、检验规则、抽样、判定规则等要求。 本文件适用于氯化聚氯乙烯( PVC-C )、硬聚氯乙烯( PVC-U )、改性聚氯乙烯( PVC-M )和高强度聚氯乙烯( PVC-H )四种类型的实壁类塑料电缆导管。
Technical conditions for power cable conduits Part 3: Solid wall plastic cable conduits
本文件规定了波纹类塑料电缆导管(以下简称为“导管”)的产品分类、标记和连接方式、技术要求、试验方法、检验规则、抽样、判定规则等要求。 本文件适用于氯化聚氯乙烯( PVC-C )、改性聚氯乙烯( PVC-M )和改性聚丙烯( MPP )三种类型的波纹电缆导管。
Technical conditions for power cable conduits Part 4: Corrugated plastic cable conduits
Technical guidelines for sulfur trioxide removal from flue gas in thermal power plants Alkaline adsorption method
Energy metering for smart sockets and similar functional appliances
Technical Specifications for Integral Error Detection of Digital Electric Energy Metering Devices
Maintenance rules for manned lifting equipment of wind turbines
Dam safety information classification and system interface technical specification
主要技术内容包括:总则、术语、材料及附件、工程设计、施工安装、验收等。
Technical specification for the engineering of aluminium alloy with rare-earth & high-iron power cables
Test method of SO3 in flue gas of thermal power plant Controlled condensation method
Technical guidelines for scrapping 201×7 strong basic anion exchange resin for water treatment in thermal power plants
Coal-fired power plant coal mill wear parts specification part 1: Ball mill balls and liners
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号