共找到 736 条与 感光材料 相关的标准,共 50 页
Environmental protection requirements for toner manufacturing processes and products
本标准规定了采用热脱附-气相色谱法测定墨粉种TVOC、苯和苯乙烯含量的方法。 本方法适用于墨粉中TVOC、苯和苯乙烯的测定。
Test method of total volatile organic compounds(TVOC), benzene and styrene in toner—Thermal desorption-chromatography
本标准规定了静电成像干式物理法(粉碎法〉彩色墨粉〈以下简称产品)的分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于数宇式静电成像方式的彩色复印机及具有复印功能的彩色多功能一体机用干式物理法(粉碎法)彩色墨粉”
Dry physical (pulverized)color toner
本标准规定了黑白数字式静电复印(打印、传真)设备用有机光导鼓(以下简称OPC鼓)的技术要求、试验方法、检验规则及标志、包装、运输、贮存要求。 本标准适用于A3及A3以下幅面的数字式静电复印(打印、传真)设备用OPC鼓。
Specification of organic photoconductive drum for digital electrostatic copying (printing, faxing) equipment
本标准规定了银盐(CTP)版的要求、试验方法、检验规则、包装及标志、贮存和运输。 本标准适用于以铝版基为支持体、卤化银为感光层、以绿激光(532nm)或紫激光(405nm、410nm)为曝光光源的银盐版。
Silver halid diffusion CTP plates
本标准规定了电影胶片和涂磁胶片卷的片芯的规格和尺寸。 本标准适用于电影胶片和涂磁胶片卷的片芯。
Cinematography.Cores for motion-picture and magnetic film rolls.Dimensions
本标准规定了胶片影像在视频监视器上色彩良好再现的密度值范围。 本标准适用于专供电视用35mm和16mm彩色电影拷贝和幻灯片。
Clour motion picture prints and slides for television Density specifications
GB/T l9348本部分规定了控制胶片处理系统的程序。
Non-destructive testing-Industrial radiographic films-Part 2:Control of film processing by means of reference values
GB/T l9348本部分的目的是确定胶片系统的性能。 GB/T l9348本部分适用于工业射线照相(无损检测)胶片系统与规定的铅增感屏组合的分类。其目的是为了保证射线照相的影像质量——它受胶片系统的影响——从而与其他国际标准如IS0 5579的要求相符。GB/T l9348本部分不适用于荧光增感胶片的分类。 评定照相处理的方法在GB/T l9348.2《无损检测 工业射线照相胶片 第2部分:用参考值方法控制胶片处理》中有规定,当给出工作条件时,依据GB/T l9348.2能控制胶片系统的性能。
Non-destructive testing-Industrial radiographic films-Part 1:Classification of film systems for industrial radiography
本标准提供确定摄影胶片防火安全性的规范和试验方法。本标准适用于目前已知的各种塑性支持体的未加工的和已加工的)胶片。本标准适用于银盐胶片(明胶型和非明胶型的两种),彩色胶片、重氮盐胶片、微泡胶片以及窄条涂磁和全宽涂磁的胶片,不包括磁带和录相带。 附录A介绍了一种现场检测胶片燃烧性能的试验方法。安全胶片的标记方法列于附录B。附录C介绍了一种区别非安全性的硝酸纤维素酯片基与安全性的乙酸纤维素酯片基及聚酯片基胶片的简易试验方法。
Photography--Photographic films--Specifications for safety film
本标准规定了黑白和彩色摄影中进行光学密度测量的光谱条件。 本标准适用于加工过的胶片、相纸和干板的黑白或彩色影象的评价。
Spectral conditions for measuring photography density
本标准规定了测量漫透射密度的几何条件,以及测量f/4.5和f/1.6投影透射密度的几何条件。 漫透射密度主要用来测量照相影象,它包括照明器上直接观看的透射影象,接触印片的母片影象以及具有漫射照明的投影影象。也适用于滤光片和其他薄膜测量。
Geometric conditions for measuring transmission density
本标准规定了电影胶片(包括涂磁胶片)片卷片芯的规格和尺寸,供制作电影胶片片卷片芯使用。
Dimensions of the cores for motion-picture film rolls
Medical blue sensitive X-ray film
Method for determination of coating dissolution of black and white photosensitive materials
Thermal imaging silver salt printing film
This document specifies a test method for the determination of gross beta activity concentration in non-saline waters. The method covers non-volatile radionuclides with maximum beta energies of approximately 0,3 MeV or higher. Measurement of low energy beta emitters (e. g. 3H, 22
Water quality - Gross beta activity - Test method using thick source (ISO 9697:2018); German version EN ISO 9697:2019
ISO 13164-4:2015 describes a test method for the determination of radon-222 activity concentration in non-saline waters by extraction and liquid scintillation counting.The radon-222 activity concentrations, which can be measured by this test method utilizing currently available i
Water quality - Radon-222 - Part 4: Test method using two-phase liquid scintillation counting (ISO 13164-4:2015); German version EN ISO 13164-4:2020
ISO 13164-2:2013 specifies a test method for the determination of radon-222 activity concentration in a sample of water following the measurement of its short-lived decay products by direct gamma-spectrometry of the water sample.The radon-222 activity concentrations, which can be
Water quality - Radon-222 - Part 2: Test method using gamma-ray spectrometry (ISO 13164-2:2013); German version EN ISO 13164-2:2020
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号