H08 标志、包装、运输、贮存 标准查询与下载

WB/T 1093-2018 钢铁物流验货操作规范

Steel Logistics Inspection Operation Specifications

WB/T 1091-2018 钢铁物流作业规范

Steel Logistics Operation Specifications

WB/T 1092-2018 钢铁物流包装、标识规范

Steel logistics packaging and labeling specifications

YB/T 4318-2012 连铸保护渣包装、标志、运输和储存

Continuous casting mold powder packaging, labeling, transportation and storage

NF P22-750:2009 静态钢存储系统.可调式集装箱上架系统.结构设计原则

Steel static storage systems - Adjustable pallet racking systems - Principles for structural design.

ASTM B666/B666M-08 铝和镁制品的识别标记的标准实施规程

1.1 This practice establishes the physical item marking requirements for identification purposes for aluminum and magnesium products. Package marking for shipment and inspection acceptance is not within the scope of this standard. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Identification Marking of Aluminum and Magnesium Products

KS D ISO 9095:2005 钢管.鉴别材料用连续符号标志和颜色码

이 규격은 배관 시스템의 제작에 쓰이는 페라이트계 및 오스테나이트계 강관의 시각적으로 연속

Steel tubes-Continuous character marking and colour coding for material identification

ASTM B914-03(2008) 钢热浸镀锌用锌和锌合金铸锭颜色编码的标准实施规程

The purpose of these color codes is to allow for quick identification of ingot bundles or jumbo ingots of alloys used for hot-dip galvanizing. Other than jumbo ingots, this standard is not intended to imply that each ingot will be color-coded but only that each ingot bundle be color coded. Each ingot bundle or jumbo ingot shall be identified with the appropriate color code listed in Table 1. The color will be applied as a stripe, or stripes, on two adjacent sides of the ingot bundle or jumbo ingot. The color stripes will be applied to include the ingot bundle foot. When using multiple stripes, the colored stripes will be applied from left to right as indicated in Table 1. In the absence of a written agreement to the contrary between the supplier and end user, the North American color code will be the standard for all North American transactions; for all other transactions the International Color Code will be used.1.1 This standard is published with the following objectives: 1.1.1 To establish standard color codes for zinc, zinc alloy and zinc master alloy ingot used by the Hot-Dip Galvanizing industry, and 1.1.2 To standardize the use and application of these color codes. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel

BS EN 2032-2:1994 金属材料.交付技术状态下冶金状态标记编码

This standard specifies the code letters to be allocated to define the metallurgical condition of metallic semi-finished products in delivery condition, for aerospace applications.

Metallic materials - Coding of metallurgical condition in delivery condition

DD ENV 606-1992 钢产品条码运输和装卸标签

Bar Coded Transport and Handling Labels for Steel Products

ISO 9095:1990 钢管 鉴别材料用连续符号标志和颜色码

This International Standard specifies the requirements for the optional continuous character and colour marking of ferritic and austenitic steel tubes that are used in the fabrication of pip-ing systems. The colour coding specified can also be used for the marking of fittings and components (see 6.2.3). It covers specific requirements for definitive material identifica-tion by the use of printed characters which are applied repetitively (continuously) along the length of the tube, and for the colour coding of discrete groups of steels. The colour cod-ing may be specified at the option of the purchaser and is in-tended for use only in conjunction with the definitive character marking requirements given in clause 5. In the absence of a suitable International Standard defining colours suitable for use in colour coding, annex A makes reference to certain equivalent colour codes given in national standards which may be used. It is recognized that this International Standard can only be applied by agreement between the parties concerned.

Steel tubes; continuous character marking and colour coding for material identification

NF A30-110:1983 钢铁.带钻孔或涂料的钢板标记

Iron and steel - Marking of steel plates with piercer or paint

Iron and steel - Marking of steel plates with piercer or paint

HB 5200-1982 包装材料透湿率试验方法

本方法适用于测定防潮用含纤维基材的低透湿率的复合包装材料的透湿率，也可用于其它塑料薄膜包装材料。

Test method for moisture permeability of packaging materials