J95 润滑系统 标准查询与下载
共找到 136 条与 润滑系统 相关的标准，共 10 页
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 7：Vibration fatigue test
- ICS
- 27.020
- CCS
- J95
- 发布
- 2017-05-12
- 实施
- 2017-12-01 00:00:00.0
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 6: Static burst pressure test
- ICS
- 27.020
- CCS
- J95
- 发布
- 2017-05-12
- 实施
- 2017-12-01 00:00:00.0
GB/T8243 的本部分规定了内燃机“旋装式”或“可更换式”全流式机油滤清器进、出口止回阀有效性的试验方法。
Methods of test for full-flow lubricating oil filters for internal combustion engines.Part 9:Inlet and outlet anti-drain valve tests
- ICS
- 27.020
- CCS
- J95
- 发布
- 2012-05-01
- 实施
- 2012-10-01
GB/T 3809的本部分规定了往复式内燃机润滑系统的相关术语。 GB/T 1883则给出了往复式内燃机的分类，并规定了这种发动机及其工作特性的基本术语。
Reciprocating internal combustion engines-Vocabulary of components and systems-Part6:Lubricating systems
- ICS
- 27.020
- CCS
- J95
- 发布
- 2009-03-19
- 实施
- 2009-11-01
GB/T 8243的本部分规定了全流式机油滤清器制造完整性的试验方法，以承受发动机或装置的振动。 本试验适用于旋装式滤清器和最大流量为100L/min采用可更换滤芯的可拆式滤清器。如制造厂和用户双方同意，本试验可也可适用于其他滤清器。
Methods of test for full-flow lubricating oil filters for internal combustion engines.Part 7:Vibration fatigue test
- ICS
- 27.020
- CCS
- J95
- 发布
- 2006-12-28
- 实施
- 2007-07-01
GB/T 8243的本部分规定了内燃机旋装式或“可更换式”全流式机油滤清器进出口止回阀有效性的试验方法。
Methods of test for full-flow lubricating oil filters for internal combustion engines. Part 9: inlet and outlet anti-drain valve tests
- ICS
- CCS
- J95
- 发布
- 2006-12-28
- 实施
- 2007-07-01
本标准规定了汽车用发动机旋装式机油滤清器互换性的基本尺寸和标记方法。 本标准适用于汽车用发动机旋装式机油滤清器。
Internal combustion engines-Spin-on filters for Iubrication oil-Dimension
- ICS
- 27.020
- CCS
- J95
- 发布
- 1999-01-08
- 实施
- 1999-10-01
This document specifies a method of testing full‐flow lubricating oil filters for internal combustion engines to determine their ability to withstand a static pressure objective and to determine their burst pressure and the failure mode concerned. It does not apply to filters for use in aeronautical applications or plastic components.
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test
- ICS
- 27.020
- CCS
- J95
- 发布
- 2021-06-01
- 实施
Oil filters with paper elements for internal combustion engines Part 3: Test methods
- ICS
- 27.020
- CCS
- J95
- 发布
- 2020-08-31
- 实施
- 2021-04-01
Internal combustion engine paper filter oil filter Part 1: Assembly technical conditions
- ICS
- 27.020
- CCS
- J95
- 发布
- 2020-08-31
- 实施
- 2021-04-01
JB/T 5089的本部分规定了内燃机纸质滤芯机油滤清器的技术要求、试验方法、检验规则和标志、包装、运输和贮存。 本部分适用于中小功率内燃机机油滤清器纸质滤芯。
Internal combustion engines.Paper-element oil filters.Part 2:Elements.Specification
- ICS
- 27.020
- CCS
- J95
- 发布
- 2020-08-31
- 实施
- 0000-00-00
Composite material oil filter for internal combustion engines Part 1: Assembly technical conditions
- ICS
- 27.020
- CCS
- J95
- 发布
- 2019-08-27
- 实施
- 2020-04-01
Composite material oil filters for internal combustion engines Part 2: Filter element technical conditions
- ICS
- 27.020
- CCS
- J95
- 发布
- 2019-08-27
- 实施
- 2020-04-01
Internal combustion engine oil pumps Part 10: Electric oil pumps
- ICS
- 27.020
- CCS
- J95
- 发布
- 2019-08-27
- 实施
- 2020-04-01
Composite material oil filters for internal combustion engines Part 2: Filter element technical conditions
- ICS
- 27.020
- CCS
- J95
- 发布
- 2019-08-02
- 实施
- 2020-04-01
Composite material oil filter for internal combustion engines Part 1: Assembly technical conditions
- ICS
- 27.020
- CCS
- J95
- 发布
- 2019-08-02
- 实施
- 2020-04-01
Oil pumps for internal combustion engines - Part 9: Electronically controlled oil pumps
- ICS
- 27.020
- CCS
- J95
- 发布
- 2019-08-02
- 实施
- 2020-04-01
Internal combustion engine oil pumps Part 10: Electric oil pumps
- ICS
- 27.020
- CCS
- J95
- 发布
- 2019-08-02
- 实施
- 2020-04-01
Internal combustion engine oil pumps Part 8: Variable displacement oil pumps
- ICS
- 27.020
- CCS
- J95
- 发布
- 2019-08-02
- 实施
- 2020-04-01
Internal combustion engine oil pumps Part 9: Electronically controlled oil pumps
- ICS
- 27.020
- CCS
- J95
- 发布
- 2019-08-02
- 实施
- 2020-04-01
