L98 检验专用设备 标准查询与下载

DB43/T 2357-2022 宽负载电流互感器通用技术规范

General technical specification for wide load current transformer

YD/T 3360-2018 移动通信系统无源互调测试仪技术要求

Technical requirements for passive intermodulation tester for mobile communication systems

KS I 1001-2011 温室气体术语及定义

이 표준은 온실가스와 관련된 용어와 그 정의를 규정한다.

Terms and definitions used in greenhouse gas

KS I 0022-2011 电器、电子产品的再利用及再生可能率计算方法

이 표준은 생산자에 의한 전기ㆍ전자제품의 재활용 및 재생 가능률 산정방법을 규정한다. 모든

Calculation method of the recyclability and recoverability rate for electrical and electronic equipment

KS I 0023-2011 电器、电子产品的再利用信息的提供

이 표준은 환경, 기술 및 비용을 고려하여 재활용센터에서 폐전기ㆍ전자제품을 처리하는 데 필

Information for recycling facilities of electrical and electric equipment

GJB 3947A-2009 军用电子测试设备通用规范

本规范规定了军用电子测试设备的通用要求、质量保证规定、交货准备和说明事项等。 本规范适用于电子测试仪器、系统，模块及特殊设备可参照本规范执行。

General apecification for military electronic test equipment

UL 869A-2006 服务设备的参考标准

This standard provides specific service equipment requirements that are intended to be supplemented by requirements for other types of equipment (such as panelboards, switchboards, and the like) that may be used as service equipment. A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involve a risk of fire, electric shock, or injury to persons shall be evaluated using the appropriate additional component and end-product requirements as determined necessary to maintain the acceptable level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard cannot be judged to comply with this standard. Where considered appropriate, revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard.

UL Standard for Safety Reference Standard for Service Equipment Fourth Edition

KS I 0051-1999 扫描电子显微镜试验方法通则

이 규격은 주사 전자 현미경을 사용하고 주로 2차 전자에 의한 시료 표면의 미소한 부분의

General rules for scanning electron microscopy

UL 869A-1998 维修设备的参考标准

Reference standard for service equipment

SJ/T 10478-1994 磁控溅射设备通用技术条件

本标准规定了磁控溅射设备的术语、产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存等。 本标准适用于磁控溅射设备。

General specification for magnetic sputtering equipment

SJ/T 10315-1992 四探针探头通用技术条件

本标准规定了四探针探头的术语、技术要求、测试方法、检验规则、标志、包装、运输、贮存要求等。 本标准适用于电子和冶金等行业所使用的四探针法测试半导体棒、片、薄层以及金属薄层的电阻率、薄层电阻和电阻的探头。 本标准与3J/T 10314《直流四探针电阻率测试仪通用技术条件》标准配套使用。

Generic specification of Four-point probe

NF C93-681/A1:1989 评定质量的电子元件白炽微型灯详细规范

Electronical Components of assessed quality Incandescent miniature lamps Detail specifications

Electronical Components of assessed quality Incandescent miniature lamps Detail specifications

SJ/T 31123-1994 自动多探针测试台完好要求和检查评定方法

本标准规定了TZ-107型和TZ-3C型自动多探针测试台的完好要求和检查、评定方法。 本标准适用于TZ-107型、TZ-3C型自动多探针测试台。其他类型的探针测试台，亦可参照执行。

Requirements of readiness and methods of inspection and assessment for automatic multi-point test probes

SJ/T 31122-1994 四探针测试仪完好要求和检查评定方法

本标准规定了JD41-5/ZM型四探针测试仪的完好要求和检查、评定方法。 本标准只适用于D41-5/ZM型四探针测试仪。

Requirements of readiness and methods of inspection and assessment for four-point probes

SJ/T 31176-1994 静态特性试验机完好要求和检查评定方法

本标准规定了彩色显像管制造用静态特性试验机的完好要求和检查、评定方法。 本标准适用于47cm彩色显像管制造中的特性试验设备，其它规格的彩色显像管制造的特性试验设备亦可参照执行。

Requirements of readiness and methods of inspection and assessment for static property testers

SJ/T 31129-1994 高低温测试设备完好要求和检查评定方法

本标准规定了高低温测试设备的完好要求和检查、评定方法。 本标准适用于DCP-55型数字显示高低温测试设备。其他相似类型的高低温测试装置，亦可参照本标准有关条款执行。

Requirements of readiness and methods of inspection and assessment for high/low temperature test equipment