M76 工业与教育电视 标准查询与下载

GB/T 14858-2011 黑白监视器通用规范

本标准规定了黑白监视器的技术要求,试验方法,质量评定程序和标志\包装ISHTIETF本标准适用于符合我国现行电视制式以阴极射线管作为显示器件的各类黑白监视器。 本标准是黑白监视器生产厂制定产品标准的依据,也是产品设计、制造和检验时应遵守的规则。

General specification for black-white monitors

GB/T 15413-1994 应用电视外部接口要求

本标准规定了应用电视外部接口要求。 本标准适用于应用电视设备和由它们所组成的系统。

Requirement of external interface for applied TV

GB/T 15414-1994 炉用高温电视系统总技术条件

本标准规定了炉用高温电视系统的产品分类、技术要求、试验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于炉内温度不大于2000℃的炉用高温电视系统（以下简称系统）。

Generic specification for furnace high-temperature television system

GB/T 15302-1994 热释电电视摄像机总技术条件

本标准规定了热释电电视摄像机（以下简称摄像机）的产品分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存等。 本标准适用于采用26mm摄像管，工作波长为8～14μm的符合GB12647规定的摄像机。

Generic specification for pyroelectric television cameras

GB/T 15415-1994 炉用高温电视系统测量方法

本标准规定了炉用高温电视系统的电、光性能的测量方法。 本标准适用于炉用高温电视系统（以下简称系统）的电、光性能的测量。

Methods of measurement for furnace high-temperature television system

GB/T 15411-1994 防爆应用电视总技术条件

本标准规定了防爆应用电视设备（以下简称设备）的产品分类、技术要求与试验方法、检验规则以及标志、包装、运输、贮存等。 本标准适用于温度为一20～+60℃，气压为86～106kPa的工厂爆炸性气体环境和煤矿井下使用的设备。

Generic specification for explosive atmospheres applied TV

GB/T 14861-1993 应用电视设备安全要求及试验方法

Safety requirements and testing methods for equipments of applied TV

DB51/T 2110-2016 动漫游戏贴图设计技术规范

本标准规定了动漫游戏贴图设计的术语与定义、技术要求、人员要求、贴图设计、贴图制作、设计检验和设计验证。 本标准适用于动漫游戏贴图的设计和制作。

Technical specification for animation game texture design

DB51/T 2108-2016 动漫游戏原画设计技术规范

本标准规定了动漫游戏原画设计的术语与定义、设计策划、技术要求、人员要求、原画设计、原画制作、设计检验和设计验证。 本标准适用于动漫游戏原画的设计和制作。

Technical Specifications for Animation and Game Original Painting Design

DB51/T 2106-2016 动漫游戏特效设计技术规范

本标准规定了动漫游戏特效设计的术语与定义、技术要求、人员要求、特效设计、特效制作、设计检验和设计验证。 本标准适用于动漫游戏特效的设计和制作。

Technical specifications for animation game special effects design

DB51/T 2107-2016 动漫游戏模型设计技术规范

本标准规定了动漫游戏模型设计的术语与定义、技术要求、人员要求、模型设计、模型制作、设计检验和设计验证。 本标准适用于动漫游戏模型的设计和制作。

Animation game model design technical specification

DB51/T 2109-2016 动漫游戏动作设计技术规范

本标准规定了动漫游戏动作设计的术语与定义、技术要求、人员要求、动作设计、动作制作、设计检验和设计验证。 本标准适用于动漫游戏动作的设计和制作。

Animation game action design technical specification

UL 983-2006 监视摄影装置

These requirements cover surveillance cameras and accessories intended for use at mercantile and banking premises to provide a means of recording images of holdup attempts or other activities in the area. A surveillance camera may be designed to operate automatically, by manual actuation, or have dual capability. It is intended to record images of the area covered by its field and may take single frame, rapid sequence, or motion pictures. Video and television products used as surveillance camera units shall also comply with the Standard for Low-Voltage Video Products Without Cathode-Ray-Tube Displays, UL 1409, or the Standard for Television Receivers and High-Voltage Video Products, UL 410. These requirements cover equipment intended for installation in accordance with the requirements of the National Electrical Code, NFPA 70. A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire, electric shock, or injury to persons shall be evaluated using the appropriate additional component and end-product requirements to determine that the level of safety as originally anticipated by the intent of this standard is maintained. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard shall not be judged to comply with this standard. Where appropriate, revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard.

UL Standard for Safety Surveillance Camera Units Seventh Edition