N08 标志、包装、运输、贮存 标准查询与下载

GB/T 25480-2010 仪器仪表运输、贮存基本环境条件及试验方法

本标准规定了仪器仪表运输和贮存的基本环境条件、试验方法、检验规则。 本标准适用于带包装运输和贮存的各类仪器仪表产品。对于有特殊贮运要求的产品，可由其产品标准另行规定。

Basic environmental conditions and testing methods for transportation and storage of instruments

GB/T 15464-1995 仪器仪表包装通用技术条件

本标准规定了仪器仪表的包装型式、防护包装类型、技术要求、试验方法、检验规则、包装标志和随机文件。 本标准适用于仪器仪表产品的包装。

Gmeneral-purpose specification for the packaging instrumentation products

SN/T 0717-2013 出口电器仪表类商品运输包装检验规程

本标准规定了出口电器仪表类商品运输包装的技术要求、检验方法及抽样和不合格处置。本标准适用于出口电器仪表类商品运输包装的检验,出口钟表类商品运输包装检验亦可参照使用。

Rules for inspection of transport packaging for export electrical and instrument-commodities

ASTM D6911-03(2010) 实验室分析用环境样品的包装和装运的标准指南

This standard provides guidance in determining the most appropriate procedures for packaging and shipping environmental samples. Use of this guide by personnel involved in packaging and shipping environmental samples will facilitate safe, effective and compliant procedures.1.1 This standard provides guidance on the selection of procedures for proper packaging and shipment of environmental samples to the laboratory for analysis to ensure compliance with appropriate regulatory programs and protection of sample integrity during shipment. 1.2 This standard does not address transport of hazardous wastes for disposal purposes. 1.3 This standard does not address the selection of parameter-specific sample bottles or containers. 1.4 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This guide cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This guide is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this guide be applied without consideration of the many unique aspects of a project. The word “standard” in the title of this guide means only that the guide has been approved through the ASTM consensus process. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis

JB/T 9329-1999 仪器仪表运输、运输贮存基本环境条件及试验方法

本标准规定了仪器仪表运输和运输贮存基本环境条件、试验方法、检验规则。 本标准适用于带出厂包装的仪器仪表产品。对有特殊贮运要求的产品，可在其产品标准中另行规定。

Basic environmental conditions and testing methods for instruments transportation and storage in the transportation

DIN 55511-3:1984 包装方法.可调整到600mm×400mm、用硬纤维板和波纹板制成的包装箱.伸缩式包装箱

Means of packaging; boxes manufactured from solid fibre-board or corrugated board, adjusted to 600 mm 400 mm (area module); telescope boxes

DIN 12622:1981 实验室玻璃器皿.测定玻璃类型用玻璃仪器的标志

Laboratory glassware; marking of glass instruments for the determination of type of glass Verrerie de laboratoire; marquage des instruments en verre pour la détermination de type de verre

Laboratory glassware; marking of glass instruments for the determination of type of glass

ISO 517:1973 摄影技术.固定式摄影机.镜头光圈分划

Photography; Still cameras; Lens aperture markings

DZ 0036-1992 地质仪器产品包装通用技术条件

General technical requirements for product packaging of geological instruments

JIS Z 0711:1978 出口光学仪器的包装

Packaging and packing of optical meter for export

JIS Z 0707:1978 出口便携式折射计的包装

Packaging and packing of hand refractometer for export

JIS Z 0704:1978 出口双筒望远镜的包装

Packaging and packing of binoculars for export