共找到 97 条与 超声波与声放射探伤仪器 相关的标准,共 7 页
Nondestructive Testing Instruments Performance and Inspection of Phased Array Ultrasonic Equipment Part 3: Combined Systems
Nondestructive Testing Instruments Performance and Inspection of Phased Array Ultrasonic Equipment Part 2: Probes
Nondestructive Testing Instruments Performance and Inspection of Phased Array Ultrasonic Equipment Part 1: Instrumentation
本标准规定了超声衍射声时检测仪的技术要求、检验规则、标志、包装、运输和贮存。本标准适用于超声衍射声时检测仪。
Non-destructive testing instruments—Ultrasonic time-of-flight diffraction instrument—Technical requirements
本标准规定了超声衍射声时检测仪的性能测试方法。本标准适用于超声衍射声时检测仪。
Non-destructive testing instruments—Ultrasonic time-of-flight diffraction instrument—Methods of performance tests
Nondestructive testing instrument—Specification for eddy current-magnetic flux leakage integrated instrument
Non-destructive testing instruments—Characterization and verification of ultrasonic thickness measuring equipment
本部分规定了使用合适的标准校准试块,检测超声检测组合设备(亦称超声检测系统)性能的检验方法和验收标准。 本部分适用于在现场或车间条件下使用的超声检测组合设备。 本部分描述的方法仅适用于A型扫描显示、带有增益控制器或步进不大于2 dB的经过校准的衰减器,且主要采用接触法检测的脉冲回波超声检测组合设备。 这些方法专门用于手动检测设备。 对于自动检测设备还需要采用不同的检测方法才能确保满足其工作性能。 本部分不适用于专用的组合超声测厚仪。
Non-destructive testing.Characterization and verification of ultrasonic test equipment.Part 3:Combined equipment
1.1本标准确立了带屏幕显示的模拟和数字式脉冲回波超声无损检测仪各部件性能特性的检测方法。 其目的是建立一种统一的评定方法,为不同实验室和不同时间获取的检测数据的比较及测量结果的分析处理提供依据。 本标准未规定验收准则,该验收准则宜由使用方规定。 超声检测仪的通用部件及其性能特性,包括测量这些性能特性的方法都列于1.2~1.6中。 1.2 电源部分 —线性调节; —电池放电时间; —电池充电时间。 1.3 脉冲发生器部分 —脉冲形状; —脉冲幅度; —脉冲上升时间; —脉冲宽度; —脉冲频谱。 1.4 接收器部分 —垂直线性; —频率响应; —噪声及灵敏度; —增益控制。 1.5 时基部分 —水平线性; —时钟(脉冲重复频率)。 1.6 闸门和(或)报警部分 —延迟和闸门宽度; —分辨力; —报警电平; —增益的同一性; —模拟量输出; —背面回波闸门的线性。
Non-destructive testing.Ultrasonic inspection.Evaluating electronic characteristics of ultrasonic test instruments
GB/T27664 的本部分规定了下列两类聚焦或非聚焦式超声无损检测用探头及其检验方法=a)产生横波或纵波的单换能器或双换能器接触式探头; h)液浸式探头a 本部分中规定的与材料有关的超声数值,是基于纵波超声声速为〈5 920士5O)m/s和横波超声声速为〔3 255土30)m/s 的钢。 2
Non-destructive testing.Characterization and verification of ultrasonic test equipment.Part 2:Probes
GB/T 27664的本部分规定了A型脉冲式模拟和数字式超声检测仪电性能的检验方法和验收标准。 本部分适用于手动式、采用工作在0.5MHz~15MHz中心频率范围内的单探头或双探头的超声检测仪。 本部分的部分检验方法和验收标准适用于自动检测系统中的超声检测仪。 本部分不适用连续被工作的超声检测仪和超声测厚仪。
Non-destructive testing.Characterization and verification of ultrasonic test equipment.Part 1:Instruments
Combined phased array ultrasonic and diffraction time-difference ultrasonic inspection of butt joints of medium and thick plates in pressure-bearing equipment
Domaine d'applicationLe présent document spécifie les méthodes, les tolérances et les critères d'acceptation permettant de vérifier les performances des équipements complets de contrôle par ultrasons (c'est-à-dire l'appareil, les traducteurs et les câbles connectés) , en utilisan
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3 : combined equipment
Technical requirements for magnetizing equipment for non-destructive testing instruments and magnetic particle testing
Non-destructive testing instrument ultrasonic detection ultrasonic diffraction sound time detector
Non-destructive testing instrument laser ultrasonic visual detector
Technical specification for phased array ultrasonic testing of welded joints of small diameter pipes
Technical specification for phased array ultrasonic testing of fillet welded joints of small diameter pipe sockets
Non-destructive testing instrument Eddy current detector with variable array probe
Non-destructive testing instrument specimens Part 4: Specimens for magnetic particle testing
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号