Q20 筑路材料 标准查询与下载
共找到 421 条与 筑路材料 相关的标准，共 29 页
本标准规定了道路用水性环氧树脂乳化沥青混合料的材料、要求、检验规则和运输。 本标准适用于各等级公路及城镇道路工程。
Waterborne epoxylite emulsified binder mixture for road engineering
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2020-07-21
- 实施
- 2021-06-01 00:00:00.0
本标准规定了无机结合料稳定类材料单轴压缩弹性模量（中间段法）的试件准备、仪器设备、试验步骤、结果计算、结果整理及试验报告。 本标准适用于道路工程无机结合料稳定类材料单轴压缩弹性模量的试验。
Uniaxial compressive elastic modulus test method of materials stabilazed with inorganic binder（middle segment method）
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2020-07-21
- 实施
- 2021-06-01 00:00:00.0
本标准规定了评价沥青混合料低温抗裂性能的试验设备、准备工作、试验步骤、计算、试验报告。 本标准适用于公称最大粒径不大于 26.5 mm 的各种热拌、温拌、冷拌沥青混合料。
Evaluation method for the cracking resistance of asphalt mixture at low temperature
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2020-06-02
- 实施
- 2021-05-01 00:00:00.0
Terminology for asphalt mixture
- ICS
- 75.140
- CCS
- Q20
- 发布
- 2019-03-25
- 实施
- 2020-02-01 00:00:00.0
Durable high modulus asphalt mixture for road engineering
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2018-05-14
- 实施
- 2019-04-01 00:00:00.0
本标准规定了温拌沥青混凝土的术语和定义、要求、试验方法、检验规则和运输。本标准适用于温拌沥青混凝土的生产、检验和使用。
Warm mix asphalt concrete
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2014-06-09
- 实施
- 2014-12-01
本标准规定了道路用抗车辙剂沥青混凝土的术语和定义、要求、试验方法、检验规则和运输、本标准适用于掺加抗车辙剂的道路用沥青混凝土的检验和使用、
Anti-rutting agent asphalt concrete for road engineering
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2012-12-31
- 实施
- 2013-09-01
本标准规定了道路沥青路面用再生沥青混凝土的术语和定义、分类和应用范围、材料要求及试验方法、再生混凝土要求及试验方法、检验规则和运输。 本标准适用于国内各等级公路和城市道路沥青路面用沥青混凝土旧料的热拌再生利用。
Recycling asphalt concrete
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2010-09-02
- 实施
- 2011-05-01
本规程适用于山东省工程建设中采用机制砂或混合砂生产混凝土时，机制砂或混合砂的检验与使用、混凝土配合比设计和制备、施工及质量验收。
Technical regulations for application of machine-made sand concrete
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2023-02-25
- 实施
- 2023-04-01
This document describes a test method to determine the average depth of pavement surface macrotexture by measuring the profile of a surface and calculating the texture depth from this profile. The technique is designed to provide an average depth value of only the pavement macrot
Characterization of pavement texture by use of surface profiles - Part 1: Determination of mean profile depth (ISO 13473-1:2019, Corrected version 2021-06); German version EN ISO 13473-1:2019
- ICS
- 17.140.30
- CCS
- Q20
- 发布
- 2021-11-00
- 实施
Technical specification for high modulus natural asphalt mixture in cold and high altitude areas
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2021-10-28
- 实施
- 2022-01-01
Technical guidelines for the survey of natural building materials for highway engineering
- ICS
- 93.080.20.
- CCS
- Q20
- 发布
- 2021-05-20
- 实施
- 2021-06-01
1.1?This specification covers the requirements for segmental concrete paving slabs manufactured for construction of pedestrian and roof applications for commercial and municipal projects. These slabs can be manufactured with a dry-cast, wet-cast, or hydraulically pressed process
Standard Specification for Segmental Concrete Paving Slabs
- ICS
- CCS
- Q20
- 发布
- 2021
- 实施
Road marking materials. Road trials
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2020-11-10
- 实施
- 2020-11-10
Technical specification for rapid construction of waterproof bonding layer on concrete bridge deck
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2019-12-23
- 实施
- 2020-07-01
Iron and steel slag for road construction
- ICS
- 91.100.15;93.080.20
- CCS
- Q20
- 发布
- 2018-12-20
- 实施
本标准规定了建筑垃圾再生材料挤密 桩处理黄土地区不良土质地基的材料 、 施工工艺 、 质量管理与 验收标准 。 本标准适用于各等级公路采用建筑垃圾再生材料挤密桩处理黄土地区不良土质地基处理 。 地基土的含水率大于 24% 、 饱和度大于 65% 时 ， 应通过试验确定其适用性 。
Construction technical specification for construction waste recycled material compaction pile
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2018-08-27
- 实施
- 2018-09-27
The percent of air voids in a bituminous mixture is used as one of the criteria in the design methods and for evaluation of the compaction imparted in bituminous paving projects.1.1 This test method covers determination of the percent air voids in compacted dense and open bituminous paving mixtures.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
- ICS
- 93.010
- CCS
- Q20
- 发布
- 2018-07-12
- 实施
- 2018-07-12
Slurry surfacing. Test methods. Determination of cohesion of the mix
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2018-04-19
- 实施
- 2018-04-19
Slurry surfacing. Test methods. Consistency
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2018-04-06
- 实施
- 2018-04-06
