Q90 建材机械与设备综合 标准查询与下载

DB31/T 1415-2023 既有多层住宅加装电梯使用管理规范

Regulations for the use and management of elevators installed in existing multi-story residential buildings

ISO 19720-1:2017 建筑施工机械和设备. 混凝土和灰浆制备厂. 第1部分: 术语和商业规格

This document specifies terms and definitions and commercial specifications for concrete mixing plants, concrete batching plants and dry mortar mixing plants used in the preparation of concrete and mortar.

Building construction machinery and equipment - Plants for the preparation of concrete and mortar - Part 1: Terminology and commercial specifications

EN ISO 29481-2:2016 建筑信息模型信息配送手册-第2部分:交互框架(ISO 29481-2:2012)

Building information models - Information delivery manual - Part 2: Interaction framework

SB/T 11130-2015 干混砂浆生产设备构架安全技术规范

本标准规定了干混砂浆生产设备构架(以下简称设备构架)在设计、制作及使用维护过程中保证构架安全的基本原则和要求。 本标准适用于以钢结构件为主体构架的干混砂浆生产设备，钢-混凝土组合构架结构的干混砂浆生产设备可参照使用。

Technical specification for framework safety of dry mixed mortar production

EN 12629-5-1:2003+A1:2010 混凝土和硅酸钙建筑产品的生产机器.安全性.第5-1部分:在垂直轴上生产的制管机

This part of EN 12629, taken together with EN 12629-1:2000+A1:2010, applies to machines for vertical manufacture of pipes, manholes and similar elements from concrete. EN 12629-1:2000+A1:2010 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calcium-silicate. This document specifies the additional requirements to and/or the deviations from EN 12629-1:2000+A1:2010 specific to the machines it covers. This European Standard deals with all significant hazards pertinent to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. This standard establishes safety requirements and/or methods of protection which applies to these machines. This European standard applies to the pipe making machines manufacturing in the vertical axis which may form an integral part of a pipe making process plant. This document is not applicable to pipe making machines manufacturing in the vertical axis, which are manufactured before the date of publication of this document by CEN.

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis

EN 12629-7:2004+A1:2010 混凝土和硅酸钙建筑产品的生产机器.安全性.第7部分:固定式和移动式预应力制品生产线设备

This part of EN 12629, taken together with EN 12629-1:2000+A1:2010 applies to stationary and mobile equipment for the benched manufacture of prestressed products. The manufacturing bed is a machine with which other associated machines work simultaneously. Moreover, these machines are generally used on beds installed in parallel. EN 12629-1:2000+A1:2010 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calcium-silicate. This document specifies the additional requirements to and/or the deviations from EN 12629-1:2000+A1:2010 specific to the machines it covers. This standard gives particular requirements for the design of the following machines: Pre-stressing bed (schematic representation is given in annex A); Bed sweeper, vacuum cleaner, oiler, wire-guide machine (schematic representation is given in annex B); Bed layout machine (schematic representation is given in annex C); Strand pushing/pulling machine (schematic representation is given in annex D); Spinner, extruder, vibrodistributor (schematic representation is given in annex E); Tarpaulin paying out and winding in machine (schematic representation is given in annex F); Sawing machine (schematic representation is given in annex G). NOTE The manufacturing operations include some or all of the following: treating pre-stressing bed with release agent; "marking out" the elements (slabs, plain slabs, etc.) to be made; running the pre-stressing strands; pre-tensioning; installing the shutterings, (formwork, side shutters, end plates and inserts) fixing reinforcement; tensioning; concrete distribution and compaction; winding out the tarpaulin; heating; detensioning; removal of shettering, formwork, etc.; strands cutting or sawing; removal of final products; bed cleaning. The concrete supply interface which is taken into account for safety is also considered. The sequence of these operations can be different according to the manufacturing process used in the factory and to the various types of products. The handling of the cut wires and their placement on beds is not covered by the present standard. This European Standard deals with all significant hazards pertinent to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. Sub-clause of EN 12629-1:2000+A1:2010 applies. This document is applicable to equipment for long-line manufacture of pre-stressed product which are manufactured after the date of publication of this document by CEN.

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products

EN 12629-1:2000+A1:2010 混凝土和硅酸钙建筑产品的生产机器.安全性.第1部分:一般要求

This European Standard applies to machines for the manufacture of constructional products from concrete and/or calcium silicate examples of which are listed in annex A of this part. It gives concepts and general and common requirements for the design, operation and maintenance of such machines. This European Standard deals with hazards listed in Clause 4 which can arise during the operation and maintenance, including the interfaces, of the machines for the manufacture of constructional products from concrete and calcium silicate, when carried out as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. Part 2 to 8 of this standard give additional specific requirements and therefore have to be applied together with this part. The preparation of concrete and/or calcium-silicate mixture and the transport from the mixer to the manufacturing plant are not part of this European Standard (see EN 12151:2007). The equipment for the transport and handling of formed products, other than the integrated transport system, is not covered by this standard. At the time of drafting, machine specific noise test codes for EN 12629-2 to -8 are not available to fulfill the requirements of 5.7.2 and 7.4.2. When they are available, they will be incorporated in these standards. This document is not applicable to machines for the manufacture of constructional products from concrete and/or calcium silicate, which are manufactured before the date of publication of this document by CEN.

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements

NF P18-650-8:2009 集料机械和物理性能试验.第8部分:抛光石数值的测定

Tests for mechanical and physical properties of aggregates - Part 8 : determination of the polished stone value.

JIS A 5540:2008 建筑用紧线器

This Japanese Industrial Standard specifies the turnbuckles mainly used for diagonal bracings of buildings(hereafter referred to as "turnbuckles").

Turnbuckle for building

JC/T 1039-2007 建筑用纸面草板机

本标准规定了建筑用纸面草板机（以下简称草板机）的分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以稻、麦草为主要原料生产符合JC/T 794建筑用纸面草板的草板机。

Machine for compressed building straw board with paperface

JC/T 1013-2006 冲击式制砂机

本标准规定了冲击式制砂机的术语和定义、产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于抗压强度极限在300MPa以下各种矿石或岩石物料制砂的冲击式制砂机（以下简称“制砂机”）。

Sand making impact machine

CSA B52HB-2005 用于执行CSA B52的实用手册.机械冷冻规范

The scope of CSA B52 is to provide minimum requirements for the design, construction, installation, and maintenance of all mechanical refrigeration systems, as provided for by provincial and territorial acts, to minimize the risk of human injury. The Co

A practical handbook for implementing CSA B52, Mechanical refrigeration code First Edition

CSA B52-05-2005 机械冷冻规范.第10版

Canadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve co

Mechanical Refrigeration Code Tenth Edition

JC/T 355-2001 水泥机械产品型号编制方法

Working out method for cement machinery product model

DB31/T 226-1999 石灰立窑运行管理与节能监测

Lime vertical kiln operation management and energy saving monitoring

JC 837-1998 建材工业用分室反吹风袋式除尘器

Sectional air reverse bag filters for building material industry

JC/T 661-1997 建材机械产品分类及型号编制方法

Classification and model designation method of building material machinery

JC 720-1997 蒸压釜

Autoclave

JC/T 662-1997 双轴搅拌挤出机

Twin-shaft mixing extruders

JG/T 5080-1996 冷轧带肋钢筋成型机

本标准规定了冷轧带肋钢筋成型机的分类、技术要求、试验方法、检验规则、标志、包装与贮运。 本标准适用于各种型式的冷轧机。

Cold rolling ribbed steel wires and bars making machines