R42 港口通信与导航 标准查询与下载
共找到 191 条与 港口通信与导航 相关的标准，共 13 页
Remote control automatic glass breaking escape device
- ICS
- 43.020.20
- CCS
- R42
- 发布
- 2019-12-31
- 实施
- 2020-03-01
This part of IEC 61162 contains the requirements for data communication between maritime electronic instruments, navigation and radiocommunication equipment when interconnected via an appropriate system. This part of IEC 61162 is intended to support one-way serial data transmission from a single talker to one or more listeners. These data are in printable ASCII form and may include information such as position, speed, depth, frequency allocation, etc. Typical messages may be from about 11 to a maximum of 79 characters in length and generally require transmission no more rapidly than one message per second. The electrical definitions in this standard are not intended to accommodate high-bandwidth applications such as radar or video imagery, or intensive database or file transfer applications. Since there is no provision for guaranteed delivery of messages and only limited error checking capability, this standard should be used with caution in all safety applications. For applications where a faster transmission rate is necessary, reference should be made to IEC 61162-2. For applications to shore based equipment of the automatic identification system (AIS) reference should be made to the IEC 62320 series.
Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners
- ICS
- 47.020.70
- CCS
- R42
- 发布
- 2016-08
- 实施
Intelligent transport systems. Traffic and travel information messages via traffic message coding. Event and information codes for Radio Data System. Traffic Message Channel (RDS-TMC) using ALERT-C
- ICS
- 03.220.20;35.240.60
- CCS
- R42
- 发布
- 2013-12-31
- 实施
- 2013-12-31
Intelligent transport systems. Traffic and travel information messages via traffic message coding. Location referencing for Radio Data System. Traffic Message Channel (RDS-TMC) using ALERT-C
- ICS
- 03.220.20;35.240.60
- CCS
- R42
- 发布
- 2013-12-31
- 实施
- 2013-12-31
本标准规定了汽车车型分类、维护分级、工艺过程、维护周期、质量保证期、维护作业和竣工检验 内容及技术要求。 代表车型、同类车型汽车的变型车和其他类型的汽车参照执行。
Automobile maintenance process specification
- ICS
- 43.080.20
- CCS
- R42
- 发布
- 2013-12-04
- 实施
- 2014-03-01
Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners; Corrigendum 1
- ICS
- 47.020.70
- CCS
- R42
- 发布
- 2013-12
- 实施
Intelligent transport systems. Communications access for land mobiles (CALM). ITS station management. Fast service advertisement protocol (FSAP)
- ICS
- 03.220.01;35.240.60
- CCS
- R42
- 发布
- 2013-07-31
- 实施
- 2013-07-31
Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV). Framework and architecture
- ICS
- 03.220.20;35.240.60
- CCS
- R42
- 发布
- 2013-01-31
- 实施
- 2013-01-31
Intelligent transport systems. Communications access for land mobiles (CALM). Using broadcast communications
- ICS
- 03.220.01;35.240.60
- CCS
- R42
- 发布
- 2013-01-31
- 实施
- 2013-01-31
This part of IEC 61162 contains the requirements for data communication between maritime electronic instruments, navigation and radiocommunication equipment when interconnected via an appropriate system. This part of IEC 61162 is intended to support one-way serial data transmission from a single talker to one or more listeners. This data is in printable ASCII form and may include information such as position, speed, depth, frequency allocation, etc. Typical messages may be from about 11 to a maximum of 79 characters in length and generally require transmission no more rapidly than one message per second. The electrical definitions in this standard are not intended to accommodate high-bandwidth applications such as radar or video imagery, or intensive database or file transfer applications. Since there is no provision for guaranteed delivery of messages and only limited error checking capability, this standard should be used with caution in all safety applications. For applications where a faster transmission rate is necessary, reference should be made to IEC 61162-2.
Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners
- ICS
- 47.020.70
- CCS
- R42
- 发布
- 2010-11
- 实施
- 2010-11
This part of IEC 61162 contains the requirements for data communication between maritime electronic instruments, navigation and radiocommunication equipment when interconnected via an appropriate system. This standard is intended to support one-way serial data transmission from a single talker to one or more listeners. This data is in printable ASCII form and may include information such as position, speed, depth, frequency allocation, etc. Typical messages may be from about 11 to a maximum of 79 characters in length and generally require transmission no more rapidly than one message per second. The electrical definitions in this standard are not intended to accommodate high-bandwidth applications such as radar or video imagery, or intensive database or file transfer applications. Since there is no provision for guaranteed delivery of messages and only limited error checking capability, this standard should be used with caution in all safety applications. For applications where a faster transmission rate is necessary, reference should be made to IEC 61162-2.
Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners
- ICS
- 47.020.70
- CCS
- R42
- 发布
- 2007-04
- 实施
- 2010-11-29
Section 106 of the National Historic Preservation Act of 1966 (NHPA) requires Federal agencies to take into account the effects of their actions on historic properties. The NHPA created the Advisory Council on Historic Preservation (ACHP) and authorized
AASHTO Practitioner's Handbook - Consulting Under Section 106 of the National Historic Preservation Act Revision 1
- ICS
- 43.040.40
- CCS
- R42
- 发布
- 2007-02-01
- 实施
This specification covers deformed steel wire which has been cold worked by drawing, rolling, or both drawing and rolling to be used as produced, or in fabricated form, for the reinforcement of concrete in sizes having nominal cross-sectional areas not
Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement
- ICS
- 43.040.40
- CCS
- R42
- 发布
- 2007-01-01
- 实施
This specification covers reinforced elliptically shaped concrete pipe to be used for the conveyance of sewage, industrial wastes, and storm water, and for the construction of culverts.
Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain and Sewer Pipe
- ICS
- 43.040.40
- CCS
- R42
- 发布
- 2007-01-01
- 实施
This specification covers two types and two grades of seven-wire, uncoated steel strand for use in pretensioned and post-tensioned prestressed concrete construction. The two types of strand are low-relaxation and stress-relieved (normal-relaxation). Lo
Standard Specification for Steel Strand, Uncoated Seven-Wire for Concrete Reinforcement
- ICS
- 43.040.40
- CCS
- R42
- 发布
- 2007-01-01
- 实施
This specification covers the manufacture and purchase requirements of products used for the assembly and construction of circular precast reinforced concrete manholes used in sewer and water works.
Standard Specification for Precast Reinforced Concrete Manhole Sections
- ICS
- 43.040.40
- CCS
- R42
- 发布
- 2007-01-01
- 实施
Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
- ICS
- 43.040.40
- CCS
- R42
- 发布
- 2007-01-01
- 实施
absorption—the increase in mass of concrete resulting from the penetration of water into the concrete
Standard Definitions of Terms Relating to Concrete Pipe and Related Products
- ICS
- 43.040.40
- CCS
- R42
- 发布
- 2007-01-01
- 实施
This specification covers concrete drain tile with internal diameters from 100 mm (4 in.) to 900 mm (36 in.) that are intended to be used for surface and subsurface drainage.
Standard Specification for Concrete Drain Tile
- ICS
- 43.040.40
- CCS
- R42
- 发布
- 2007-01-01
- 实施
The highway facility should be designed to be compatible with existing drainage patterns. Concurrently, the highway and the traveling public should be protected from the hazards of flooding. In this regard, the drainage design for the highway facility h
STORM DRAIN SYSTEMS 4th edition
- ICS
- 43.040.40
- CCS
- R42
- 发布
- 2007-01-01
- 实施
