R56 救捞装置 标准查询与下载

JT/T 215-2022 水下胶粘剂技术要求和试验方法

Technical requirements and test methods for underwater adhesives

JIS B 7023:2021 潜水表. 分类和性能

Divers' watches -- Classification and performance

JT/T 824.1-2011 钢制打捞浮筒.第1部分：建造

JT/T 824的本部分规定了钢制打捞浮筒的结构及组成、建造要求及出厂资料等。 本部分适用于钢制打捞浮筒的生产和检验。

Steel salvage camel.Part 1: Fabrication

JT/T 824.2-2011 钢制打捞浮筒.第2部分：保养与维修

JT/T 824的本部分规定了打捞浮筒的保养和维修的要求。 本部分适用于钢制打捞浮筒的使用。

Steel salvage camel.Part 2: Maintaining and repair

ASTM F1730-96 水上救生投掷包的投掷用标准导则

1.1 This guide covers the recommended procedures for throwing a water rescue throwbag. 1.2 This guide is one in a series of water rescue techniques for the water rescuer. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Throwing a Water Rescue Throwbag

ASTM F1728-96(2007) 多人冷水中生存/解救技术用标准规程:拥挤点

This practice establishes a multiple person cold water survival/rescue procedure. All persons who are identified as water rescuers shall meet the requirements of this practice. This practice is intended to assist government agencies, state, local, or regional organizations; fire departments; and rescue teams and others who are responsible for establishing a minimum performance for personnel who respond to water emergencies. The majority of the rescuers performing this technique must be wearing personal flotation devices. These devices should conform to standards set by the appropriate national regulatory authority, that is, the U.S. Coast Guard in the United States, and be in good and serviceable condition. A water rescuer sometimes may be immersed in cold water for prolonged periods of time. They are unable to get to shore or shore is too far away, rescue is not imminent, no boat is available to get into or on top of, and no flotsam is available. The water rescuer needs to assume a defensive posture to conserve heat and increase survival time.1.1 This practice covers the recommended water rescue procedure for performing the huddle position.1.2 This practice is one in a set of self-rescue techniques for the water rescuer.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Multiple Persons Cold Water Survival/Rescue Technique: Huddle Position

ASTM F1730-96(2002) 水上救生投掷包的投掷用标准导则

This guide establishes a recommended procedure for a throwing rescue to ensure the safety of all water rescuers who may be involved in rescue techniques at a water rescue emergency. This water rescue technique can be utilized from land, boat, or any stable platform. All persons who are identified as water rescuers shall meet the requirements of this guide. This guide is intended to assist government agencies, state, local, and regional organizations; fire departments; rescue teams and others who are responsible for establishing a minimum performance for personnel who respond to water emergencies. The procedure outlined in the document may vary with the number and type of victims, and water conditions.1.1 This guide covers the recommended procedures for throwing a water rescue throwbag. 1.2 This guide is one in a series of water rescue techniques for the water rescuer. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Throwing a Water Rescue Throwbag

ASTM F1729-96(2007) 个人冷水中生存/解救技术用标准规程:救助位置

This practice establishes a single person cold water survival/rescue procedure. All persons who are identified as water rescuers shall meet the requirements of this practice. This practice is intended to assist government agencies, state, local, or regional organizations; fire departments; and rescue teams and others who are responsible for establishing a minimum performance for personnel who respond to water emergencies. A rescuer needs to be wearing a personal flotation device to perform this technique. These devices should conform to standards set by the appropriate national regulatory authority, that is, the U.S. Coast Guard in the United States, and be in good and serviceable condition. A water rescuer sometimes may be immersed in cold water for prolonged periods of time. They are unable to get to shore or shore is too far away, rescue is not imminent, no boat is available to get into or on top of, and no flotsam is available. The water rescuer needs to assume a defensive posture to conserve heat and increase survival time.1.1 This practice covers the recommended water rescue procedure for performing the heat escape lessening posture (HELP) position.1.2 This practice is one in a set of self-rescue techniques for the water rescuer.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Single Person Cold Water Survival/Rescue Technique: HELP Position

ASTM F1730-96(2009) 水上救生投掷包的投掷用标准指南

This guide establishes a recommended procedure for a throwing rescue to ensure the safety of all water rescuers who may be involved in rescue techniques at a water rescue emergency. This water rescue technique can be utilized from land, boat, or any stable platform. All persons who are identified as water rescuers shall meet the requirements of this guide. This guide is intended to assist government agencies, state, local, and regional organizations; fire departments; rescue teams and others who are responsible for establishing a minimum performance for personnel who respond to water emergencies. The procedure outlined in the document may vary with the number and type of victims, and water conditions.1.1 This guide covers the recommended procedures for throwing a water rescue throwbag. 1.2 This guide is one in a series of water rescue techniques for the water rescuer. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Throwing a Water Rescue Throwbag

JT/T 215-1995 水下胶粘剂技术要求和试验方法

本标准规定了水下胶粘剂的技术性能和试验方法。 本标准适用于海难救助、打捞和海洋工程等金属和其他水下构筑物暂时附着固定用的胶粘剂。

Technical requirements and testing methods for underwater adhesives

JT/T 210-1995 救捞用软管法兰接头

本标准规定了救捞用软管法兰接头(以下简称法兰接头)的产品品种、规格和技术要求等。 本标准适用于压力为0. 5MPa，软管内径分别为100mm,160mm和200mm的救捞用软管法兰接头。

Flange of flexible hose for salvage

JT/T 209-1995 救捞用输气输水胶管接头

本标准规定了救捞用输气输水胶管接头的产品品种、规格，技术要求及检验规则等 本标准适用于公称压力1MPa的救捞用输气输水胶管接头(以下简称胶管接头)。

Air and water rubber hose coupler for salvage

JT/T 212-1995 GN-S型船底攻泥器

本标准规定了GN-S型船底攻泥器(以下简称攻泥器)的产品结构、技术要求、检验规则和标志、包装、运输及贮存。 本标准适用于潜水员在打捞沉船时穿引船底钢线绳所用的攻泥器。

GN-S Mud-penetrator under bottom

JT/T 211-1995 气升式吸泥器

本标准规定了气升式吸泥器的技术条件、结构尺寸及使用范围。 本标准适用于水深8-60m的气升式吸泥器(以下简称吸泥器)。

Air lift mud pump

JT/T 213-1995 SGⅢ型水下氧弧割炬

本标准规定了SGIII型水下氧弧割炬的技术要求、试验方法、检验规则和标志、包装、运输、贮存的要求。 本标准适用于100m以浅供水下切割的SGIII型水下氧弧割炬(以下简称割炬)。

TYPE-SGⅢ Underwater oxygen-arccutting torch

JT/T 39-1993 浮筒打捞沉船技术要求

本标准规定了使用钢壳圆柱形浮简(以下简称浮筒)在打捞沉船工程中的技术要求。 本标准适用于海上使用浮筒打捞沉船，江河打捞沉船亦可参照使用。

Technical Requirements for Salvaging Wreck With Pontoon