S52 铁路货车 标准查询与下载
共找到 185 条与 铁路货车 相关的标准，共 13 页
本标准规定了新造铁道货车落成后投入使用前对其主要技术性能所进行的检查与试验的术语和定义、检查与试验规则、检查与试验方法。 本标准适用于最高运行速度小于或等于120 km/h、轴重小于或等于30 t的新造铁道货车的检查与试验。最高运行速度大于120 km/h、轴重大于30 t或结构和运用有特殊要求的新造铁道货车(如：长大货物车、液化气体铁路罐车等)可参照执行。
Rules for inspecting and testing of railway for freight car
- ICS
- 45.060.20
- CCS
- S52
- 发布
- 2018-06-07
- 实施
- 2019-01-01
General technical conditions for railway freight cars (French)
- ICS
- CCS
- S52
- 发布
- 2018-06-07
- 实施
- 2019-01-01
General technical specification for railway freight car
- ICS
- 45.060.20
- CCS
- S52
- 发布
- 2018-06-07
- 实施
- 2019-01-01 00:00:00.0
General technical specification for railway freight car
- ICS
- CCS
- S52
- 发布
- 2018-06-07
- 实施
- 2019-01-01
Rules for inspecting and testing of railway freight car
- ICS
- CCS
- S52
- 发布
- 2018-06-07
- 实施
- 2019-01-01
Railway tank car for liquefied gases
- ICS
- 45.060.10
- CCS
- S52
- 发布
- 2017-10-14
- 实施
- 2018-05-01 00:00:00.0
1.1 本标准规定了液化气体铁道通罐车（以下简称罐车）的材料、设计、制造、涂装与标记、检验规则的要求。 1.2 本标准适用于设计压力大于等于0.1Mpa、设计温度不高于50℃，装运介质为液化气体的钢制罐车标准轨距罐车。 1.3 本标准不适用于下列罐车: ——罐体为有色金属或非金属材料的； ——罐体为真空绝热结构的； ——罐体为国防军事装备用有特殊要求的。 1.4 对不能采用本标准进行设计的罐车，允许采用以下方法设计，但需经全国锅炉压力容器标准化技术委员会评定、认可： ——包括有限元法在内的应力分析； ——验证性试验分析（如实验应力分析、验证性液压试验）； ——用可比的已投入使用的结构进行对比经验设计。
Railway tank car for liquefied gases
- ICS
- 45.060
- CCS
- S52
- 发布
- 2006-12-15
- 实施
- 2007-05-01
本标准规定了新造铁道货车落成后投入使用前对其主要技术性能所进行的检查与试验方法。 本标准适用于构造速度小于或等于120km/h、轴重小于或等于25t的标准轨距新造铁道货车组装后的检查与试验。构造速度大于120km/h、轴重大于25t及有特殊要求的新造铁道货车可参照执行。
Rules for inspecting and testing of railway freight car after completion of construction
- ICS
- 45.060.20
- CCS
- S52
- 发布
- 2006-12-14
- 实施
- 2007-05-01
本标准规定了铁道货车的一般要求、材料要求、结构要求、制造要求、涂装与标记等。 本标准适用于构造速度小于或等于120km/h、轴重小于或等于25t的标准轨距新造铁道货车。构造速度大于120km/h、轴重大于25t及有特殊要求的新造铁道货车可参照执行。
General technical specification for railway freight car
- ICS
- 45.060.20
- CCS
- S52
- 发布
- 2006-12-14
- 实施
- 2007-05-01
本标准规定了铝制铁道罐车的设计、制造、检验及验收要求。 本标准适用于1435mm标准轨距运输浓硝酸、冰乙酸、乙二醇、过氧化氢以及类似介质用的铝制铁道罐车（以下简称罐车）。
Specifications for aluminium tank cars
- ICS
- 45.060.20
- CCS
- S52
- 发布
- 1989-03-22
- 实施
- 1989-10-01
本标准规定了液化气体铁道罐车的技术要求、检验方法及验收细则。 本标准适用于1435mm标准轨距运输液化气体的新造四轴铁道罐车（以下简称罐车）。
Specification for liquid gas tank cars
- ICS
- 45.060.20
- CCS
- S52
- 发布
- 1989-03-22
- 实施
- 1989-10-01
本标准适用于1435mm标准轨距的新造铁道货车落成完工后的检查与试验。
Rules for inspecting and testing of freight car after completion of construction
- ICS
- 45.060.20
- CCS
- S52
- 发布
- 1985-11-25
- 实施
- 1986-09-01
适用范围：适用于罐体内容器的设计压力不小于0.1MPa，几何容积在30m3～150m3之间，采用真空粉末绝热或高真空多层绝热结构，且与底架进行永久性连接的铁路运输用罐车。
Refrigerated liquefied gas railway tank car
- ICS
- 43.080.10
- CCS
- S52
- 发布
- 2021-11-16
- 实施
- 2022-02-16
Railway freight car body assembly hopper car bottom door opening and closing system
- ICS
- ICS45.060.20
- CCS
- S52
- 发布
- 2018-06-05
- 实施
- 2019-01-01
Railway applications - Radio remote control system of traction vehicle for shunting traffic
- ICS
- 33.200;45.060.10
- CCS
- S52
- 发布
- 2018-01-19
- 实施
- 2018-11-03
Railway wagon bearing oil seal
- ICS
- 45.060.20
- CCS
- S52
- 发布
- 2015-08-07
- 实施
- 2016-03-01
Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment; German version EN 50125-1:2014
- ICS
- 29.280;45.060.10
- CCS
- S52
- 发布
- 2014-11
- 实施
This standard applies to carbodies of newly constructed heavy rail transit vehicles for transit passenger service. It defines requirements for the incorporation of passive safety design concepts related to the performance of the carbody of heavy rail transit vehicles in conditions such as collisions, so as to enhance passenger safety, and limit and control damage. This Standard does not cover light rail vehicles, automated people movers, and freight, commuter, or high speed rail vehicles. It does not cover structural repairs, fatigue, corrosion, fire protection, interior vehicle design or emergency egress from vehicle. RT-2-2014 Safety Standard for Structural Requirements for Heavy Rail Transit Vehicles, arose from an industry groundswell to address the heavier-duty carbody requirements of North America versus those of Europe (which are governed by European standards EN12663, EN15663 and EN15227.) This Standard is unique for utilizing Crash Energy Management (CEM) protocols. CEM represents the latest best-practices of design, testing, analysis and manufacture?enhancing crashworthiness by assigning certain sections of the carbody the task of absorbing a portion of the energy of collision by crushing in a controlled manner. Proper application of CEM preserves occupant volume, while minimizing the consequences of occupant impacts with the vehicle interior. Production efficiencies may also be realized via CEM.
Safety Standard for Structural Requirements for Heavy Rail Transit Vehicles
- ICS
- 45.060.20
- CCS
- S52
- 发布
- 2014
- 实施
- 2014-3-12
Railway applications. Testing for the acceptance of running characteristics of railway vehicles. Freight wagons. Testing of running safety under longitudinal compressive forces
- ICS
- 45.060.20
- CCS
- S52
- 发布
- 2012-11-30
- 实施
- 2012-11-30
Specifications for period check of railway freight car overload detection device
- ICS
- CCS
- S52
- 发布
- 2011-11-01
- 实施
- 2011-11-01
