T45 牵引汽车 标准查询与下载
共找到 51 条与 牵引汽车 相关的标准，共 4 页
本标准规定了半挂牵引车的制动及电路连接器件安装位置。 本标准仅适用于半挂牵引车。
Brake and electrical connection locations of semi-trailer-towing vehicle
- ICS
- 43.040.40
- CCS
- T45
- 发布
- 1987-03-09
- 实施
- 1988-01-01
本标准规定了全挂牵引车及货车作为牵引车使用时，其气制动连接器及电连接器插座在后横梁上的安装位置。 本标准适用于全挂牵引车和货车作为牵引车时的运输车辆；拖挂总质量大于3.5t。
Brake and electrical connection locations of truck and trailer-towing vehicle
- ICS
- 43.040.40
- CCS
- T45
- 发布
- 1987-03-09
- 实施
- 1988-01-01
High-voltage boxes of passenger cars for locomotive traction and multiple units. General specifications
- ICS
- 45.060.01
- CCS
- T45
- 发布
- 2015
- 实施
- 2016-10-01
Technical conditions for car and train configuration in drop and pull transport stations Part 1: Semi-trailer tractor
- ICS
- 43.080.10
- CCS
- T45
- 发布
- 2014-01-23
- 实施
- 2014-02-23
This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This SAE Recommended Practice establishes the recommended locations for the air brake and electrical connections for the back of a truck-tractor and the front of a truck-trailer.
Brake and Electrical Connection Locations Truck-Tractor and Truck-Trailer
- ICS
- 43.040.40;43.080.10
- CCS
- T45
- 发布
- 2013-01-07
- 实施
- 2013-09-13
This Standard defines the safety requirements relating to the elements of design, operation, and maintenance of operator controlled industrial tow tractors up to and including 66750 N (15,000 lb) maximum rated drawbar pull of a non-braked load.
Safety Standard for Operator Controlled Industrial Tow Tractors
- ICS
- 53.060
- CCS
- T45
- 发布
- 2012
- 实施
This SAE Recommended Practice establishes the recommended locations for the air brake and electrical connections for the back of a truck-tractor and the front of a truck-trailer.
Brake and Electrical Connection Locations Truck-Tractor and Truck-Trailer
- ICS
- 43.040.40;43.080.10
- CCS
- T45
- 发布
- 2008-11-10
- 实施
- 2008-11-11
This International Standard specifies performance and safety requirements for both normal and emergency steering modes of agricultural tractors. It is applicable to those tractors having a maximum design speed, measured in accordance with ISO 3965, not exceeding (60 _+ 3) km/h. It is not applicable to track-laying tractors equipped with steel tracks having a maximum design speed, measured in accordance with ISO 3965, not exceeding (15 _+ 3) km/h.
Agricultural tractors - Requirements for steering
- ICS
- 65.060.10
- CCS
- T45
- 发布
- 2008-06-01
- 实施
high mechanical and/or thermal requirements. Für Zierteile, Schutzüberzüge, Dichtlippen ohne gro?e mechanische und/oder thermische Beanspruchung.
Performance Requirements for Exterior Plastic Parts Revision E; Do Not Use on New Applications. Being Replaced by GMW14650
- ICS
- CCS
- T45
- 发布
- 2007-03-01
- 实施
Despite spot checks possibly perfromed by Opel, it is the supplier's esponsibility that the delivered parts are in line with the Opel drawings.
Corrosion Protective Coatings Zinc/Organic Type
- ICS
- CCS
- T45
- 发布
- 2005-04-01
- 实施
In diesen Technischen Lieferbedingungen sind die qualitatsabhangigen Anforderungen dieses Polsterstoffes festgelegt. Die allgemeinen Mindestanforderungen sind grundsatzlich nach TM 110000 zu prüfen.
Conductive Prep Coat For Plastics
- ICS
- CCS
- T45
- 发布
- 2005
- 实施
In diesen Technischen Lieferbedingungen sind die qualitatsabhangigen Anforderungen dieses Polsterstoffes festgelegt. Die allgemeinen Mindestanforderungen sind grundsatzlich nach TM 110000 zu prüfen.
UV/Thermal Dual Cure Primer For Plastic Substrates
- ICS
- CCS
- T45
- 发布
- 2005
- 实施
Central Laboratories 1 ENGINEERING MATERIAL SPECIFICATION In diesen Technischen Lieferbedingungen sind die qualitatsabhangigen Anforderungen dieses Polsterstoffes festgelegt. Die allgemeinen Mindestanforderungen sind grundsatzlich nach TM i 15900 zu prü
UV Cure Primer For Plastic Substrates
- ICS
- CCS
- T45
- 发布
- 2005
- 实施
Tejp 8409 ar en sjjalvhaftande folietejp utformad som dekor, skylt etc att fasta utvandigt pa karossen.
Automatic Transmission Fluid, GM Factory Fill
- ICS
- CCS
- T45
- 发布
- 2004
- 实施
Hogtalartyg Speaker cloth
Adhesive, Hot Melt, Headlining/Wire Harness
- ICS
- CCS
- T45
- 发布
- 2002-02-01
- 实施
Unbeschadet etwaiger durch den Abnehmer erfolgenden Stidrobenprüfungen tragt der Lieferant die Verantwortung- dafür, da? die gelieferte Ware die Opel-Zeichnungsvorschriften erflillt. Ein Prüfbericht mit zahlenma?lgen Ergebnissen aus Prüfungen der Lieferun
Performance Requirements for Plastic Seat Belt Components Revision C; Do Not Use On New Programs
- ICS
- CCS
- T45
- 发布
- 2002
- 实施
Zur DurchfClhrung der Prtlfungen werden die Polsterstoffe mechanisch von der direktausgeschaumten Kopfstutze getrennt.
Purge Solvent/Cap Cleaner for Waterborne Basecoat Revision A
- ICS
- CCS
- T45
- 发布
- 2001-06-01
- 实施
Stoff, auf PUR-Schaum flammkaschiert und Abdeckvlies, im Zusammenbau auf Tragerwerkstoff kaschiert.
Waterborne, High Bake Sprayable Damper
- ICS
- CCS
- T45
- 发布
- 2001-04-01
- 实施
In diesen Technischen Lieferbedingungen sind die qualitatsabhangigen Anforderungen dieses Polsterstoffes festgelegt. Die allgemeinen Mindestanforderungen sind grundsatzlich nach TM 1 15900 zu prufen.
Flame Treatment Surface Preparation for Plastic Wheel Trim
- ICS
- CCS
- T45
- 发布
- 2001-04-01
- 实施
This International Standard specifies the locations of coupling devices for electrical and pneumatic connections between towing and towed commercial road vehicles. It is applicable to heavy vehicles equipped with pneumatic braking systems and 24 V electrical equipment of the following types: drawbar-trailer combinations whose towing vehicles have rear-mounted couplings or couplings mounted forward and below, and articulated vehicles.
Commercial vehicles - Location of electrical and pneumatic connections between towing vehicles and trailers
- ICS
- 43.040.10;43.040.70
- CCS
- T45
- 发布
- 2000-11
- 实施
