T53 工程汽车 标准查询与下载
共找到 81 条与 工程汽车 相关的标准，共 6 页
本标准规定了高空作业车的术语和定义、分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于最大作业高度不大于100 m的高空作业车(以下简称作业车)。 本标准不适用于高空消防车、高空救援车。
Vehicle-mounted mobile elevating work platform
- ICS
- 53
- CCS
- T53
- 发布
- 2008-02-03
- 实施
- 2008-07-01
本标准规定了高空作业车（以下简称作业车）的设计、制造、检验等有关技术条件。 本标准适用于各系列型谱规定的汽车底盘和其他工程车辆底盘配置的平台最大作业高度40m及其以下的伸缩臂式作业车、折叠臂式作业车、垂直升降式作业车和混合式作业车。其它型式和有特殊要求的作业车均可参照本标准执行。
Technical conditions of aerial work vehicle
- ICS
- 43.160
- CCS
- T53
- 发布
- 1988-06-24
- 实施
- 1988-11-01
本标准规定了高空作业车试验的基本原则、要求和方法。 本标准适用于GB9465.1所规定的高空作业车的定型试验、产品出厂及产品质量定期检查试验。
Test methods for aerial platform
- ICS
- 43.160
- CCS
- T53
- 发布
- 1988-06-24
- 实施
- 1988-11-01
本标准规定了高空作业车的型式和规格参数及其系列。 本标准适用于以各种系列型谱规定的汽车底盘和其它工程车辆底盘配置的最大作业高度40m及其以下的高空作业车。其它型式和有特殊要求的高空作业车均参照本标准执行。
Classification of aerial work vehicles
- ICS
- 43.160
- CCS
- T53
- 发布
- 1988-06-24
- 实施
- 1988-11-01
Construction large panel transport truck
- ICS
- 43.160.60
- CCS
- T53
- 发布
- 2019-11-11
- 实施
- 2020-04-01
This European Standard specifies the general safety requirements of non-slewing variable-reach rough-terrain trucks, articulated or rigid chassis, equipped with a telescopic lifting means (pivoted boom), on which a load handling device (e. g., carriage and fork arms) is typically fitted. Fork arms and other integrated attachments are considered to be parts of the truck. For attachments the appropriate clauses of this standard are applicable and other specific standards may also apply.
Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks; German version EN 1459-1:2017
- ICS
- 53.060
- CCS
- T53
- 发布
- 2018-02-01
- 实施
DB34/T 2943 的本部分规定了工业车辆远程服务与管理系统车载终端的术语和定义、技术要求和试 验方法。 本部分适用于工业车辆远程服务与管理系统用集成式和独立式车载终端。
Technical specification for industrial vehicle remote service and management system Part 1: Vehicle terminal
- ICS
- 35.240.60
- CCS
- T53
- 发布
- 2017-09-15
- 实施
- 2017-10-15
DB34/T 2943 的本部分规定了工业车辆远程服务与管理系统车载终端的术语和定义、技术要求和试 验方法。 本部分适用于工业车辆远程服务与管理系统用集成式和独立式车载终端
Industrial Vehicle Remote Service and Management System Technical Specification Part 2: Communication Protocol and Data Format
- ICS
- 35.240.60
- CCS
- T53
- 发布
- 2017-09-15
- 实施
- 2017-10-15
Industrial trucks - Safety requirements and verification - Part 2: Self-propelled variable-reach trucks (ISO 3691-2:2016); German version EN ISO 3691-2:2016 + AC:2016
- ICS
- 53.060
- CCS
- T53
- 发布
- 2017-02
- 实施
Energy efficiency of Industrial trucks. Test methods. General
- ICS
- 53.060
- CCS
- T53
- 发布
- 2016-12-31
- 实施
- 2016-12-31
Vehicles carrying tools and gears - Part 3: Emergency tender RW
- ICS
- 13.220.10
- CCS
- T53
- 发布
- 2016-12
- 实施
Energy efficiency of Industrial trucks. Test methods. Operator controlled self-propelled trucks, towing tractors and burden-carrier trucks
- ICS
- 53.060
- CCS
- T53
- 发布
- 2016-11-30
- 实施
- 2016-11-30
Energy efficiency of Industrial trucks. Test methods. Container handling lift trucks
- ICS
- 53.060
- CCS
- T53
- 发布
- 2016-11-30
- 实施
- 2016-11-30
Rough-terrain trucks. Visibility. Test methods and their verification. Variable-reach trucks
- ICS
- 53.060
- CCS
- T53
- 发布
- 2016-11-30
- 实施
- 2016-11-30
Industrial trucks - Safety requirements and verification - Part 2: Self-propelled variable-reach trucks (ISO 3691-2:2016); German version EN ISO 3691-2:2016
- ICS
- 53.060
- CCS
- T53
- 发布
- 2016-10
- 实施
Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks; German version EN 1459-2:2015
- ICS
- 53.060
- CCS
- T53
- 发布
- 2016-05
- 实施
This part of ISO 11525, when used in conjunction with ISO 11525-1 or ISO 11525-2, defines specific user requirements relating to the use of non-slewing and slewing variable-reach trucks operating with freely suspended loads. When provisions of this part of ISO 11525 are different from those which are stated in ISO 11525-1 or It is intended to achieve the following: a) prevention of personal injuries, property damage and accidents; b) establishment of criteria for inspection, maintenance, operation and training. NOTE National or local requirements can apply, whichever could be more stringent. General user requirements for non-slewing variable-reach trucks are given in ISO 11525-1. General user requirements for slewing variable-reach trucks are given in ISO 11525-2. This part of ISO 11525 is not applicable to flexible intermediate bulk containers as defined in ISO 21898.
Rough-terrain trucks - User requirements - Part 4: Additional requirements for variable-reach trucks handling freely suspended loads
- ICS
- 53.060
- CCS
- T53
- 发布
- 2016-04
- 实施
Industrial trucks. Safety requirements and verification. Self-propelled variable-reach trucks
- ICS
- 53.060
- CCS
- T53
- 发布
- 2016-02-29
- 实施
- 2016-02-29
