U12 船体通用结构 标准查询与下载



共找到 188 条与 船体通用结构 相关的标准,共 13

This international Standard specifies terms and definitions relating to dredgers, with the aim of giving clear enough definitions for every term to be understood by all specialists. It applies only to floating dredgers and its equipment which is used for the creation and maintenance of navigable waterways and the exploitation of soil.

Ships and marine technology - Dredgers - Vocabulary (ISO 8384:2018); German version EN ISO 8384:2018

ICS
01.040.47;47.060
CCS
U12
发布
2018-11-00
实施

Ships and marine technology. Thermally toughened safety glass panes for windows and side scuttles

ICS
47.020.05
CCS
U12
发布
2018-01-31
实施
2018-01-31

This international Standard specifies terms and definitions relating to dredgers, with the aim of giving clear enough definitions for every term to be understood by all specialists. It applies only to floating dredgers and its equipment which is used for the creation and maintenance of navigable waterways and the exploitation of soil.

Ships and marine technology - Dredgers - Vocabulary (ISO/DIS 8384:2017); German and English version prEN ISO 8384:2017

ICS
01.040.47;47.060
CCS
U12
发布
2017
实施

Inland navigation vessels - Railings for decks and side decks - Requirements, designs and types

ICS
47.020.50;47.060
CCS
U12
发布
2016-08-06
实施
2016-08-06

This European Standard is applicable to railings for decks and in gangways on inland navigation vessels. It lays down design, dimensions, strength and test conditions which have to be observed for safety reasons. The railings provide protection for persons against falling overboard and from one deck to another.

Inland navigation vessels - Railings for decks and side decks - Requirements, designs and types

ICS
47.020.10
CCS
U12
发布
2016-06
实施

Ships and marine technology. Hinged watertight doors

ICS
47.020.10
CCS
U12
发布
2015-09-30
实施
2015-09-30

Footholds on bulwark

ICS
47.020.10
CCS
U12
发布
2015-06
实施

Large yachts. Weathertight doors. Strength and weathertightness requirements

ICS
47.040
CCS
U12
发布
2015-01-31
实施
2015-01-31

(a) Where no other Load Line certificate is issued:

Shipping. Part44:Special service limited domestic voyages. SubpartB:Rules for assigning special service load lines. Section44.05-35:Form of load line certificate.

ICS
CCS
U12
发布
2014-09-29
实施
2014-09-29

(a) Length (L) means 96 percent of the total length on a waterline at 85 percent of the least moulded depth measured from the top of the keel or the length from the foreside of the stem to the axis of the rudder stock on that waterline, if that is greater.?In ships designed with a rake of keel the waterline on which this length is measured must be parallel to the designed waterline.

Shipping. Part45:Great lakes load lines. SubpartA:General. Section45.3:Definitions.

ICS
CCS
U12
发布
2014-09-29
实施
2014-09-29

(a) Defined.?‘‘Under-deck tonnage’’ means the tonnage of the space below the line of the tonnage deck, as that volume is calculated under this section.

Shipping. Part69:Measurement of vessels. SubpartC:Standard measurement system. Section69.109:Under-deck tonnage.

ICS
CCS
U12
发布
2014-09-29
实施
2014-09-29

(a) Defined.?‘‘Superstructure tonnage’’ means the tonnage of all permanent structures, such as forecastle, bridge, poop, deckhouse, and break, on or above the line of the uppermost complete deck (or line of shelter deck, if applicable).

Shipping. Part69:Measurement of vessels. SubpartC:Standard measurement system. Section69.113:Superstructure tonnage.

ICS
CCS
U12
发布
2014-09-29
实施
2014-09-29

(a) Where bulwarks on the weather portions of freeboard or superstructure decks form wells, the bulwarks must have the area prescribed in this section and §§ 45.119 and 45.121 for rapidly freeing and draining the decks of water.

Shipping. Part45:Great lakes load lines. SubpartD:Conditions of assignment. Section45.117:Freeing port area: General.

ICS
CCS
U12
发布
2014-09-29
实施
2014-09-29

Ships and marine technology. Floating pneumatic rubber fenders. High pressure

ICS
47.020.99;83.140.99
CCS
U12
发布
2014-01-31
实施
2014-01-31

Standard Guide for Conducting Small Boat Stability Test (Deadweight Survey and Air Inclining Experiment) to Determine Lightcraft Weight and Centers of Gravity of a Small Craft

ICS
47.080
CCS
U12
发布
2014
实施

4.1 From the lightcraft characteristics, calculations of the stability characteristics of the small craft for all load conditions can determine compliance to applicable stability criteria or provide mass properties information for other analyses or investigations. Accurate results from an air incline stability test may therefore determine future survival of the boat, the crew and compliment. If the small craft is not 1008201;% complete or there is fuel or other liquids in a tank that is supposed to be clean and dry then the person leading the stability test must determine the acceptability of all variances from the guide based on the ability to correct for these variances analytically. A complete understanding of the principles behind the stability test and knowledge of the factors that affect the results is therefore necessary. 4.2 The results of the stability test typically supersede the corresponding values in the weight estimate for any subsequent use in ascertaining compliance to stability or weight control criteria and may be used in weight margin adjudication. 1.1 This guide covers the determination of a small boat’s lightcraft characteristics. The air incline stability test can be considered two separate tasks; a deadweight survey and an air-inclining experiment. The stability test is recommended, but not required, for all small craft upon their construction completion and/or after major conversions where stability information is required. It is typically conducted indoors and an enclosed facility to protect the vessels from unprotected environmental conditions. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Conducting Small Boat Stability Test 40;Deadweight Survey and Air Inclining Experiment41; to Determine Lightcraft Weight and Centers of Gravity of a Small Craft

ICS
47.080 (Small craft)
CCS
U12
发布
2014
实施

本标准规定了船体防火分隔典型耐火结构型式的分类与标记、要求。本标准适用于各类船舶结构性限界面所设置的各级防火分隔(不包括防火门、甲扳敷料、管系通舱附件、电缆贯穿防火分隔面的各种结构型式)。

Typical fire-proof structure of hull fire protection division

ICS
47.020.01
CCS
U12
发布
2013-10-17
实施
2014-03-01

本标准规定了钢质船舶船体分段工作图设绘的基本依据、船体分段工作图绘制要求、内容和要领及校审项目等。本标准适用于钢质船舶生产设计中船体分段工作图的设绘。

Design essentials of hull block's working drawing

ICS
47.020.01
CCS
U12
发布
2013-10-17
实施
2014-03-01

本标准规定了油船货油舱区域典型船体结构节点、零部件的结构型式和尺寸。本标准适用于油船,其他船舶、海洋工程建筑物等亦可参照执行。

Structure details in cargo hold area of oil tanker

ICS
47.020.10
CCS
U12
发布
2013-10-17
实施
2014-03-01

本标准规定了采用普通盘管蒸汽加热系统的计算公式及符号、说明及相关数据。本标准适用于油船货油舱及燃油舱采用普通盘管蒸汽加热装置设计和运营的油船对运载不同油种时的加热综合计算及燃油舱的蒸汽加热系统计算。

Calculation of steam heating systems for oil tanks

ICS
47.020.01
CCS
U12
发布
2013-10-17
实施
2014-03-01



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号