V07 电子计算机应用 标准查询与下载



共找到 410 条与 电子计算机应用 相关的标准,共 28

本标准规定了民用飞机复合材料设计模型定义制造数据的基本流程.技术要求(包括制造模型生成.制造模型分析和制造数据存储)。本标准适用于民用飞机自动下料手工铺王工艺复合材料零部件生产制造前的数据准备工作。2 术语.定义和缩略语

Manufacturing data definition of civil aircraft composite part design model

ICS
49.020
CCS
V07
发布
2020-06-02
实施
2021-01-01 00:00:00.0

本标准规定了基于模型的航空装备产品数字化定义的数据集内容和要求,并给出了典型航空产品零组件数字化定义基本要求。 本标准适用于基于模型的航空装备产品数字化定义,可为基于模型的定义技术应用提供指导。

Model based aviation equipment research and development.Digital product definition principles

ICS
49.020
CCS
V07
发布
2018-06-07
实施
2019-01-01

本标准规定了基于模型的航空装备产品数据(以下简称“数据”)交换的原则和要求,以及数据质量验证准则。 本标准适用于基于模型的航空装备产品研制单位内部和单位之间数据在不同平台下的交换过程。

Model based aviation equipment research and development.Data transformation

ICS
49.020
CCS
V07
发布
2018-06-07
实施
2019-01-01

Model based aviation equipment research and development—Technical data package

ICS
49.020
CCS
V07
发布
2018-06-07
实施
2019-01-01 00:00:00.0

Model based aviation equipment research and development—Data sending and receiving

ICS
49.020
CCS
V07
发布
2018-06-07
实施
2019-01-01 00:00:00.0

本标准规定了基于模型的航空装备研制企业数字化能力水平的评价原则、方法和形式,给出了评价与改进流程以及应用示例。 本标准适用于基于模型的航空装备研制企业数字化能力评价和持续改进。

Model based aviation equipment research and development.Enterprise evaluation on digital capability level

ICS
49.020
CCS
V07
发布
2018-06-07
实施
2019-01-01

Model based aviation equipment research and development—Enterprise digital capability level model

ICS
49.020
CCS
V07
发布
2018-06-07
实施
2019-01-01 00:00:00.0

GB/T30974 的本部分规定了数据库中纤维增强聚合物基复合材料标识的材料标识记录列表、数据元素的模块划分和数据元素集。 本标准适用于纤维增强聚合物基复合材料在数据库中的标识和描述。

Guide for identification and recording of fiber-reinforced composite materials in databases.Part 2:Guide of identification

ICS
83.120
CCS
V07
发布
2014-07-24
实施
2015-01-01

GB/T 30974的本部分规定了数据库中纤维增强复合材料力学试验数据收录的数据元素标准格式、数据元素集、试验结果和试验数据报告的相关信息。本部分适用于纤维增强复合材料力学试验数据的数据库收录,为复合材料力学试验数据提供标准化的数据格式及数据元素集。涉及的试验类型包括:拉伸、压缩、剪切、弯曲、开孔/充填孔、挤压、断裂韧性和疲劳。

Guide for identification and recording of fiber-reinforced composite materials in databases.Part 1:Guide of recording mechanical test data

ICS
83.120
CCS
V07
发布
2014-07-24
实施
2015-01-01

Aircraft cockpit display system and user system interface requirements

ICS
ICS?49.020
CCS
V07
发布
2021-03-05
实施
2021-07-01

Technical Specifications for Shared Passenger Processing Systems at China Civil Airports Part 3: Hardware Interface Definitions

ICS
ICS35.240.60
CCS
V07
发布
2018-12-14
实施
2019-04-01

Specification for electronic graphics installation list

ICS
ICS35.240.60
CCS
V07
发布
2018-12-14
实施
2019-04-01

EN 9300-010 provides an overview description for the recommended processes for archiving of 3D product data, e. g. 3D CAD and PDM data. The processes are described in EN 9300-011 to EN 9300-016.

Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 010: Overview Data Flow; German and English version EN 9300-010:2018

ICS
01.110;35.240.10;35.240.30;49.020
CCS
V07
发布
2018-10-01
实施

This standard is a part of the EN 9300 Series. This standard addresses requirements for the long term archiving of digital product information, applicable to the international aerospace industry. Data shall be available to meet regulatory, legal, contractual and business requirements. Initially, this document sums up the main business requirements for long term archiving of digital product data. Although these requirements are not in themselves normative, when making data available over an extended period, it is a fundamental principle that the contextual data needed to interpret the data is also available. This standard uses the OAIS reference model to provide comparability with other approaches to keeping information available. However, OAIS is a standard reference model for comparison, not a standard for implementation. Consequently, this document defines requirements for processes (and associated technologies) intended to make data available for the life of a product, and does so in terms of the OAIS model. In dealing with traditional media, the differences between substantial change and unimportant "surface" change are generally self-evident. For example, the yellowing of paper over time, or the encrustation of a gravestone with lichen do not lose the information contained, whereas the loss of pages of a document, or the erosion of the stone do so, and archiving focusses on the preservation of the medium. For digital product data, the medium is unimportant, but the content can be corrupted. The subject of the (many) remaining parts of this standard is the identification of the information that shall be uncorrupted if digital product data is to be usable in the future, and the consequent refinement of processes and procedures to insure this. This standard addresses, archiving of digital product data required for product definition, such as in three-dimensional representations a tolerances, material properties, manufacturing data, etc. specification call-outs, pr

Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 002: Requirements; German and English version EN 9300-002:2018

ICS
01.110;35.240.30;35.240.60;49.020
CCS
V07
发布
2018-10-00
实施

Aerospace series. LOTAR. LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. Explicit CAD assembly structure

ICS
01.110;35.240.10;35.240.30;49.020
CCS
V07
发布
2018-07-20
实施
2018-07-20

Aerospace series. LOTAR. Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. Requirements

ICS
01.110;35.240.30;35.240.60;49.020
CCS
V07
发布
2018-06-29
实施
2018-06-29

This document defines the common terms, abbreviations and references used through the EN 9300 series of standard parts.

Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 007: Terms and References; German and English version EN 9300-007:2017

ICS
01.110;35.240.30;35.240.60;49.020
CCS
V07
发布
2017-12-00
实施

EN 9300-005 describes the fundamentals and concepts of authentication and verification of the integrity of digital documents and their content during the archiving and retrieval processes. The Data Domain Parts EN 9300-x00 will specify qualification measures for the content of the document. The fundamentals given in this document cover the requirements, methods and recommendations for their implementation within an archiving system.

Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 005: Authentication and Verification; German and English version EN 9300-005:2017

ICS
01.110;35.240.30;35.240.60;49.020
CCS
V07
发布
2017-12-00
实施

Space systems - Guidelines for the management of systems engineering

ICS
49.140
CCS
V07
发布
2017-11-01
实施

Aerospace series. LOTAR. LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. Authentication and Verification

ICS
01.110;35.240.30;35.240.60;49.020
CCS
V07
发布
2017-10-24
实施
2017-10-31



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号