V23 弹性元件 标准查询与下载

SAE AS5728-2009 AMS 7268材料制O型密封圈模塑预成型包装

This standard establishes the dimensional and visual quality requirements and packaging and labeling requirements for O-Rings molded from AMS 7268 rubber. It shall be used for procurement purposes.

Packing, Preformed, O-Ring Molded from AMS 7268 Material

AECMA PREN 6094-2007 航空航天系列.垫圈弹簧埋头钉.P2版

This draft is now available for public comment and your views and technical comments on it would be appreciated. If you have no specific comments to make hut find it generally acceptable it would be helpful if you would notify US accordingly. Suggestions entailing revision of the text should indicate the preferred wording. Please quote the relevant clause number against any comment.

Aerospace series Washer, spring, countersunk Edition P 2

AECMA PREN 4632-001-2007 航空航天系列.焊接和钎焊组件 飞机构架材料可焊性和可钎焊性.第001部分:一般要求.P1版

This standard specifies the required characteristics for lamp, code 1619, used on-board aircraft. It shall be used together with EN 2756.

Aerospace series Welded and brazed assemblies for aerospace constructions Weldability and brazeability of materials Part 001: General requirements Edition P1

AECMA PREN 6091-2006 航空航天系列.簧环.P1版

This standard specifies the dimensions, tolerances, required characteristics and masses of a circlip for use in fuselage interior equipment and structural applications. This standard shall be used in conjunction with stud per EN 6088 and retaining washer per EN 6089.

Aerospace series Circlip Edition P 1

NAVY MIL-STD-792 F-2006 特殊元件鉴定标记需求

The purpose of this standard is to provide general requirements for the marking of raw materials, products and components.

IDENTIFICATION MARKING REQUIREMENTS FOR SPECIAL PURPOSE COMPONENTS

DLA MS27985 REV B VALID NOTICE 3-2005 漏斗脖纽扣头型6型弹簧扣件

The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil

FASTENERS, SNAP, STYLE 6 (FUNNEL NECK BUTTON HEAD TYPE)

DLA MS27977 REV D VALID NOTICE 2-2005 大窗帘型1型弹簧扣件

The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil

FASTENER, SNAP, STYLE 1 (LARGE CURTAIN TYPE)

DLA MS27979 REV C VALID NOTICE 3-2005 防泥型窗帘IB弹簧扣件

The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil

FASTENER, SNAP, STYLE IB (MUD-PROOF CURTAIN TYPE)

DIN EN 4420:2004 航空航天系列.合金钢FE-PA3903制有弹簧张力的卡箍

This standard specifies the characteristics of spring tension clips for the support of electrical harnesses, in FE-PA3903 for aerospace applications. Maximum operating temperature: 250 ?,,#

Aerospace series - Clips, spring tension, in alloy steel FE-PA3903; German and English version EN 4420:2003

SAE AS24585B-2003 螺旋耐压弹簧:适于20磅以下的荷载

SPRING, HELICAL, COMPRESSION: FOR LOADS BELOW 20 POUNDSTABLE 1 - CORRECTION FACTOR FOR STRESS RANGE LIFE CYCLES AND SPRING MATERIALTABLE 2 - DIMENSIONS AND CHARACTERISTICS TABLE 2 - CONTINUED

SPRING, HELICAL, COMPRESSION: FOR LOADS BELOW 20 POUNDS

HB 8291-2002 压缩弹簧

Compression spring

HB 8286-2002 圆形弹簧卡圈

本标准规定了 形弹黄卡圈的结构、尺寸要求。 本标准适用于掖压装置壳体上安装用的滤芯盖、断流活门的肯定。

Circle spring clamp hoop

HB 8292-2002 压缩弹簧和拉伸弹簧规范

本规范规定了压缩弹簧和拉伸弹簧的技术要求 ，质量保证规定和交货准备。 本规范适用于工作温度为常温和温度不超过 500℃ 高溫的彈簧的制造和驗收。

Specification for compressed spring and tensile spring

HB 8284-2002 弹簧按钮

Spring button

NAVY QPL-24702-6-2001 一次性液压过滤元件的一般规格(米制)

This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense

FILTER ELEMENTS, HYDRAULIC, DISPOSABLE, GENERAL SPECIFICATION FOR (METRIC)

AECMA PREN 4585-2000 航空航天系列.夹弹簧张力技术规范.P1版

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). It is published on green paper for the needs of AECMAMembers. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.

Aerospace Series Clips, Spring Tension Technical Specification Edition P 1

AECMA TR 4586-2000 航空航天系列.夹弹簧张力设计建议.第1版

This Technical Report was drawn up by the Technical Committee C 8 of the AECMA Standardization Committee.

Aerospace Series Clips, Spring Tension Design Recommendations Edition 1

AECMA TR 4587-2000 航空航天系列.夹弹簧张力组装建议.第1版

This Technical Report specifies the conditions of installation of spring clips for aerospace applications.

Aerospace Series Clips, Spring Tension Assembly Recommendations Edition 1

AECMA PREN 4590-2000 航空航天系列.固定器弹簧金属片自动锁螺母抗腐蚀钢钝化.P1版

This 'Herospace Series" Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). It is published on green paper for the needs of AECMAMembers. It has been technically approved by the experts of the concerned Technical Cornmittee following comment by the Member countries.

Aerospace Series Retainers, Spring, Sheet Metal, for Self-Locking Barrel Nuts, in Corrosion Resisting Steel, Passivated Editino P 1

AECMA PREN 4420-1999 航空航天系列.夹弹簧张力合金钢FE-PA3903 E.P1版

This "Aerospace Series" Presfandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.

Aerospace Series Clips, Spring Tension, in Alloy Steel FE-PA3903 Edition P 1