V41 导航通讯系统与设备 标准查询与下载

BS EN 3745-505:2018 航空航天系列.航空器用光纤和光缆.试验方法.第505部分:光缆拉力强度

Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Cable tensile strength

DIN EN 303213-1:2017 先进场面活动引导和控制系统(A-SMGCS).第1部分:A-SMGCS等级1包括外部接口用欧洲单一空中互操作性规则EC 552/2004下应用的共同体规范(英文版本EN 303213-1 V1.4.1 (2016-12)的核准本作为德国标准)

Advanced Surface Movement Guidance and Control System (A-SMGCS) - Part 1: Community Specification for application under the Single European Sky Interoperability Regulation EC 552/2004 for A-SMGCS Level 1 including external interfaces (Endorsement of the E

DIN EN 300720:2017 超高频(UHF)船上船舶通信系统. 包含2014/53/EU指令第3.2条基本要求的协调标准(作为德国标准的英文版本EN 300 720 V2.1.1 (2017-01)核准)

Ultra-High Frequency (UHF) on-board vessels communications systems and equipment - Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU (Endorsement of the English version EN 300 720 V2.1.1 (2017-01) as German

BS PD IEC/TS 62564-1:2016 航空电子设备的过程管理.航空航天用合格电子设备(AQEC).集成电路和离散半导体

Process management for avionics. Aerospace qualified electronic components (AQEC). Integrated circuits and discrete semiconductors

IEC 62396-1:2016 航空电子设备过程管理.环境辐射影响.第1部分:航空电子设备内部由单粒子效应引起的环境辐射影响的调节

This part of IEC 62396 is intended to provide guidance on atmospheric radiation effects on avionics electronics used in aircraft operating at altitudes up to 60000 ft (18,3 km). It defines the radiation environment, the effects of that environment on electronics and provides design considerations for the accommodation of those effects within avionics systems. This International Standard is intended to help avionics equipment manufacturers and designers to standardise their approach to single event effects in avionics by providing guidance, leading to a standard methodology. Details of the radiation environment are provided together with identification of potential problems caused as a result of the atmospheric radiation received. Appropriate methods are given for quantifying single event effect (SEE) rates in electronic components. The overall system safety methodology should be expanded to accommodate the single event effects rates and to demonstrate the suitability of the electronics for the application at the component and system level.

Process management for avionics - Atmospheric radiation effects - Part 1: Accommodation of atmospheric radiation effects via single event effects within avionics electronic equipment

NF Z85-842-2*NF EN 302842-2:2015 VHF空对地和空对空数字链(VDL)模式4无线电设备. 航空移动(空载)设备的技术特性和测量方法.第2部分:一般描述和数据链路层(V1.4.1)

VHF air-ground and air-air Digital Link (VDL)Mode 4 radio equipment - Technical characteristics and methods of measurement for aeronautical mobile (airborne) equipment - Part 2 : general description and data link layer (V1.4.1)

DIN EN 4652-001:2015 航空航天系列. 射频同轴连接器. 第001部分: 技术规格; 德文和英文版本EN 4652-001-2015

Aerospace series - Connectors, coaxial, radio frequency - Part 001: Technical specification; German and English version EN 4652-001:2015

BS IEC 62396-5:2014 航空电子设备过程管理. 大气辐射影响. 航空电子系统中热中子通量和单粒子效应评估

Process management for avionics. Atmospheric radiation effects. Assessment of thermal neutron fluxes and single event effects in avionics systems

HB 8443-2014 民用飞机航空电子设备完整性大纲要求

本标准规定了民用飞机航空电子设备的完整性要求及其验证要求,并对规定的要求与验证要求给出了理由、导则和经验。本标准适用于民用飞机航空电子设备的研制。

Civil aircraft avionics integrity program requirements

HB/Z 415-2014 民用飞机机载电子设备通用指南

本指导性技术文件规定了民用飞机机载电子设备（以下简称设备）的设计和结构、元器件和零部件的选用、材料的选用、表面处理、环境应用和质量保证等通用要求。详细的电气和机械设计、性能及试验要求按设备专业规范或合同中的规定。 本指导性技术文件适用于民用飞机机载电子设备的研制。

General guidelines for airborne electronic equipment of civil aircraft

HB 8391-2014 民用飞机航空电子系统飞行试验要求

本标准规定了民用飞机航空电子系统飞行试验的内容和要求。 本标准适用于民用运输类飞机航空电子系统飞行试验。其他类飞行试验可参照使用。

Requirements for flight test of civil aircraft avionics system

SAE ARP4260B-2014 气载电子平板显示器用光度测定及比色测量规程

This SAE Aerospace Recommended Practice (ARP) contains methods used to measure the optical performance of airborne electronic flat panel display (FPD) systems. The methods described are specific to the direct view, liquid crystal matrix (x-y addressable) display technology used on aircraft flight decks. The focus of this document is on active matrix, liquid crystal displays (LCD). The majority of the procedures can be applied to other display technologies, however, it is cautioned that some techniques need to be tailored to different display technologies. The document covers monochrome and color LCD operation in the transmissive mode within the visual spect

Photometric and Colorimetric Measurement Procedures for Airborne Electronic Flat Panel Displays

BS EN 60952-2:2013 飞机用蓄电池组.第2部分:设计和制造要求

Aircraft batteries. Design and construction requirements

BS EN 60952-1:2013 飞机用蓄电池组. 一般试验要求和性能水平

Aircraft batteries. General test requirements and performance levels

BS EN 60952-3:2013 飞机用蓄电池组. 产品规范及设计与性能的声明 (DDP)

Aircraft batteries. Product specification and declaration of design and performance (DDP)

BS IEC 62396-4:2013 航空电子设备过程管理.环境辐射影响.高压飞机电子管理潜在单一事件效应的设计

Process management for avionics. Atmospheric radiation effects. Design of high voltage aircraft electronics managing potential single event effects

HB 8390-2013 民用飞机可加载软件要求

本标准规定了民用飞机可加载软件部件(LSP) 和可加载软件传输介质(介质集) 的要求，其中包括 LSP 以及包含 LSP 的介质集的部件编号、内容、标签和格式。 本标准适用于民用飞机系统、设备、航线可更换单元(LRU) 和航线可更换模块(LRM) 的可加载软 件和软件传输介质。

Loadable software requirements for civil aircraft

HB 8392-2013 民用飞机多模式接收机（MMR）技术要求

本标准规定了安装在民用飞机上的多模式接收机(MMR) 的一般要求、接口要求、各组成接收机的 技术要求，以及天线、显示控制、飞机特征模块和自动测试等要求。 本标准适用于民用飞机 MMR.。

Technical Requirements for Civil Aircraft Multimode Receiver (MMR)

DIN IEC/TS 62647-2:2013 航空电子设备过程管理.含无铅锡焊的航空和防御电子系统.第2部分:锡毒害作用的缓解(IEC/TS 62647-2-2012)

Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 2: Mitigation of deleterious effects of tin (IEC/TS 62647-2:2012)

DIN IEC/TS 62647-23:2013 航空电子设备工艺管理.包含无铅焊料的航空航天和防御电子系统.第23部分:消除无铅电子设备和混合装配组件可能影响的返修和维修导则(IEC 107/206/DTS-2013)

Process management for avionics - Aerospace and defence electronic systems containing lead free solder - Part 23: Rework and repair guidance to address the implications of lead-free electronics and mixed assemblies (IEC 107/206/DTS:2013)