Y72 金属丝制品 标准查询与下载



共找到 80 条与 金属丝制品 相关的标准,共 6

本标准规定了钢板网的术语和定义、分类和标记、型式尺寸、要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于建筑、防护、通风、造船、隔离、装备制造业、日用品等用途的钢板网。

Expanded steel net

ICS
77.140.99
CCS
Y72
发布
2016-12-13
实施
2017-07-01

本标准规定了镀锌电焊网(以下简称电焊网)的标记、型式与尺寸、要求、试验方法、检测规则、标志、包装、运输和贮存。 本标准适用于建筑、种植、养殖、机器防护罩、围栏、家禽笼、盛蛋筐及交通运输采矿等用途的电焊网。

Welded wire fabric coated with zine

ICS
77.140.99
CCS
Y72
发布
2016-12-13
实施
2017-07-01

本标准规定了用于筛分和过滤的工业金属丝编织网的术语和定义、技术要求、试验方法、质量文件、订货信息和发货等内容、本标准适用于其材料为钢、不锈钢或有色金属的工业金属丝编织方孔网、不适用于织后镀覆的金属丝编织网、预弯成型金属丝编织网和金属丝焊接筛网、对筛分以外用途的金属丝编织网,订货时由供需双方达成协议才可使用、

Industrial woven wire cloth.Technical requirements and testing

ICS
73.120
CCS
Y72
发布
2012-12-31
实施
2013-10-01

本标准规定了网孔基本尺寸2~125mm的工业用预弯成型金属丝编织方孔网的型式、尺寸、技术要求、检验方法、验收规则及标志、包装、运输、贮存。 本标准适用于颗粒的筛选,也适用于骨架、支撑、防护等其他用途的预弯成型金属丝编织方孔网(以下简称预弯成型网)。

Inductrial pre-crimped wire screens (square openingseries)

ICS
67.260
CCS
Y72
发布
1991-12-14
实施
1992-10-01

This International Standard defines terms regarding industrial woven wire cloth for screening purposes and specifies maximum permissible error, requirements, and test methods. It is of limited application to woven wire cloth used for purposes other than screening which may necessitate other requirements. The alternative requirements may be agreed between the purchaser and the supplier at the time of placing the order.

Industrial woven wire cloth - Technical requirements and tests

ICS
19.120;73.120
CCS
Y72
发布
2016-07
实施

Industrial woven wire cloth. Technical requirements and tests

ICS
73.120
CCS
Y72
发布
2016-06-30
实施
2016-06-30

Metal laths

ICS
91.100.10
CCS
Y72
发布
2014-08-20
实施

Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes; German version EN 10223-3:2013

ICS
77.140.65
CCS
Y72
发布
2014-04
实施

本标准规定了刀片刺绳的结构型式及分类、规格型号及标记、技术要求、试验方法、检验规则及包装、标志、运输、质量证明书。 本标准适用于机场、高铁、机关单位、监狱、哨所、边防等圈禁防护用的刀片刺绳,特殊要求的可参照执行。

razor wire

ICS
77.140.99
CCS
Y72
发布
2013/08/31
实施
2013/08/31

本标准规定了美格网的结构图、规格形式、技术要求、试验方法、检验规则及包装、标志、运输、质量证明书。 本标准适用于门窗防护、装饰、防盗装置、隔离等场合的美格网,特殊要求的可参照执行。

Megnet

ICS
21.080
CCS
Y72
发布
2013/08/31
实施
2013/08/31

Hardmetal burrs. General specifications

ICS
25.100.20
CCS
Y72
发布
2013-08-31
实施
2013-08-31

本标准规定了窗纱的分类和标记、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于防止蚊虫与扬尘侵入、供建筑物和卫生设施上使用的窗纱。包括玻璃纤维、合成纤维(聚乙烯、涤纶、尼龙)等非金属材料,以及不锈钢、铝合金、低碳钢等金属材料;用于纱窗、纱门、菜厨、菜罩、蝇拍、捕虫器等;工作温度不宜超过50℃。

Screen mesh

ICS
97.190
CCS
Y72
发布
2012-05-24
实施
2012-11-01

Crimped wire cloth (Amendment 1)

ICS
77.140.99
CCS
Y72
发布
2011-02-21
实施

Woven wire cloth (Amendment 1)

ICS
77.140.99
CCS
Y72
发布
2011-02-21
实施

Hexagonal wire netting (Amendment 1)

ICS
77.140.99
CCS
Y72
发布
2011-02-21
实施

Chain link wire netting (Amendment 1)

ICS
77.140.99
CCS
Y72
发布
2011-02-21
实施

Low carbon steel wires

ICS
77.140.65
CCS
Y72
发布
2011-02-21
实施

1.1 This specification covers industrial woven wire fabric, referred to as wire cloth, for general use including the separation of particles. Wire cloth can be made of any primary metal or metal alloy wire that is suitable for weaving. This specification does not apply to the following special types of wire cloth: filter cloth or dutch weave (see Appendix X1), fourdrinier and cylinder cloth, galvanized hardware cloth, insect wire screening, spiral weave wire cloth, testing sieve cloth, or welded wire cloth. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Industrial Woven Wire Cloth

ICS
59.060.30 (Mineral and metal fibres)
CCS
Y72
发布
2011-01-01
实施

1.1 This specification covers gabions and revet matresses produced from double-twisted metallic-coated wire mesh, and metallic-coated wire for lacing wire, stiffeners, and fasteners used for manufacturing, assembling, and installation of the product. This specification also covers gabions and revet mattresses in which the wire mesh, lacing wire, and stiffeners are poly(vinyl chloride) (PVC) coated after the metallic coating. 1.2 Double-twisted wire mesh for gabions and revet mattresses is produced in different styles, based on type of coating, as described in Section 4. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this specification. 1.5 The following safety hazards caveat pertains only to the test methods portion, Section 13, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Doublex2013;Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)

ICS
77.140.65 (Steel wire, wir ropes and link chains)
CCS
Y72
发布
2011
实施

Industrial filter cloth is a specialized product that can be manufactured in many specifications. The purpose of this guide is to (1) introduce standard terms and definitions associated with wire filter cloth, (2) observe common technical considerations that a user should be aware of, and (3) present a mathematical model that can be used to predict the micron retention of a filter cloth specification. As often numerous specifications may be developed to result in a common micron retention by varying the weave type, mesh count, and wire diameters, it is recommended that the user consult with their filter cloth supplier regarding specific filter cloth specifications of interest and include in their discussions durability, pressure drop, and cleaning capability requirements. The purpose of this guide is not to suggest a limited selection of specifications. The micron retention of a filter cloth specification can be mathematically modeled as well as determined by the use of a glass bead test or the bubble-point test method or both depending on the degree of fineness. Typical standard bubble-point test methods (porometry) include Test Methods F316 and SAE ARP901.1.1 This guide covers the special grade of industrial woven wire cloth, referred to as filter cloth, for general filtration including the separation of solids from fluids (liquids or gases), based on a desired particle size retention. Filter cloth can be made of any primary metal or metal alloy wire that is suitable for weaving. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Industrial Woven Wire Filter Cloth

ICS
19.120
CCS
Y72
发布
2011
实施



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号