Y93 日用玻璃、搪瓷、陶瓷加工机械 标准查询与下载



共找到 23 条与 日用玻璃、搪瓷、陶瓷加工机械 相关的标准,共 2

Crystal automatic grinding machine

ICS
97.195
CCS
Y93
发布
2019-08-02
实施
2020-01-01

This International Standard specifies a method for the production of specimens suitable for testing vitreous and porcelain enamel coatings. It specifies two different specimens: - specimens taken from production articles; - specially produced specimens.

Vitreous and porcelain enamels - Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron (ISO 28764:2008); German version EN ISO 28764:2011

ICS
25.220.50
CCS
Y93
发布
2011-06
实施

本标准规定了行列式制瓶机的分类、规格系列、要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于玻璃瓶罐工业自动成型各种小口瓶和大口瓶的行列式制瓶机系列产品。

Individual section forming machine

ICS
81.100
CCS
Y93
发布
2011-05-18
实施
2011-08-01

1.1 This standard contains the requirements for safety for the design and installation of equipment intended for the storage, handling and transportation of flat glass inside the factory as described in Clause 3. It applies to stationary, movable and mobile storage equipment (see 3.2), mechanical and pneumatic handling equipment (see 3.3) and transportation equipment (see 3.4) (see overview in Annex A). 1.2 Additional requirements for dealing with specific hazards due to the use outside the factory are dealt with in prEN 13035-2. 1.3 This standard only deals with the devices which are directly in contact with the glass. Tractors, cranes, hoists and fork lifts are out of the scope as well as parts of other powered vehicles that are not in contact with the glass (see 3.4.1). This standard does not apply to manual handling equipment as defined in 3.3.1. 1.4 This standard deals with all significant hazards, hazardous situations and events relevant to equipment for the storage, handling and transportation of flat glass, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, the operation and maintenance. Noise has not been considered to be a significant hazard for any type of equipment in the scope of this standard. 1.5 This document is not applicable to storage, handling or transportation equipment for flat glass inside the factory, which is manufactured before the date of its publication as EN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory

ICS
81.100
CCS
Y93
发布
2008-04-30
实施
2008-04-30

This European Standard specifies requirements on thermal shock resistance as well as heating and cooling procedures of standardised glass-lined apparatus, components, accessories, and glass-lined pipes primarily used for process equipment in chemical plants. It specifies the limits of thermal shock resistance using diagrams (see Figure 1 and Figure 2). For glass-lined steel, a difference is made between a thermal shock on the glass-lined side (by charging an apparatus) versus a thermal shock on the steel side (by heating and cooling an apparatus). This European Standard applies to operating temperatures from - 25 °C to + 230 °C. This European Standard is only applicable to enamelled unalloyed and low-alloy carbon steels.

Vitreous and porcelain enamels - Glass lined apparatus for process plants - Part 3: Thermal shock resistance; German version EN 15159-3:2006

ICS
25.220.50;71.120.10
CCS
Y93
发布
2006-10
实施

This European Standard specifies the quality requirements for apparatus, components, appliances and accessories of vitreous glass-lined steel (including semi-crystallized enamel coatings) and steel cast used for process plants. It specifies the quality requirements and the tests to be carried out by the manufacturer as well as the necessary actions for repairing defects. This European Standard is also applicable to glass-lined pumps, pump components and fittings. This European standard is not applicable to glass-lined flanged steel pipes and flanged steel fittings. NOTE 1 Provisions for glass-lined flanged steel pipes and flanged steel fittings are given in DIN 2876 [1]. The test methods specified cover checking the enamel, dimensional accuracy and performance of apparatus and components. This European Standard applies to new apparatus and components as well as used ones that have to be re-enamelled. This European Standard does not contain requirements regarding the chemical and physical properties of vitreous and porcelain enamels. NOTE 2 Examples of test reports are given in Annex A.

Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 1: Quality requirements for apparatus, components, appliances and accessories; German version EN 15159-1:2006

ICS
25.220.50;71.120.10
CCS
Y93
发布
2006-10
实施

本标准规定了制糖机械产品型号编制方法。 本标准适用于制糖机械产品。

Programming method for the types of sugar machinery

ICS
CCS
Y93
发布
2002-09-21
实施
2002-12-01

本标准规定了浸冲式洗瓶机的定义、产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于清洗回收的巴氏消毒乳玻璃瓶或其他装灌有液态饮料的类似形状玻璃瓶[见附录A(标准的附录)表A2]的浸冲式洗瓶机(以下简称“洗瓶机”)。

Dipping bottle washing machine

ICS
CCS
Y93
发布
2000-06-13
实施
2000-10-01

This International Standard specifies the apparatus to be used for testing the resistance of flat surfaces of vitreous and porcelain enamels to attack by hot aqueous alkaline solutions such as solutions of sodium hydroxide.

Vitreous and porcelain enamels - Apparatus for testing with alkaline liquids

ICS
25.220.50
CCS
Y93
发布
1997-07
实施

本标谁规定了日用陶瓷链式于燥器热工基本性能指标监测与计算方法。 本标准适用于日用陶瓷坯体干燥过程中,使用热烟气、各类窑炉余热和锅炉饱和水蒸气为干燥器热源的链式干燥器热工基本性能监测与计算。

Monitoring and Calculation Method of Thermal Performance Index of Daily Ceramic Chain Dryer

ICS
CCS
Y93
发布
1995-06-07
实施
1996-03-01

本标准规定了真空练泥机的产品分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于真空练制陶瓷塑性泥料的真空练泥机。

Vacuum mud refining machine

ICS
81.100
CCS
Y93
发布
1995-05-08
实施
1996-01-01

本标准规定了陶瓷工业用球磨机(简称“球磨机”)的产品分类、技术要求和试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于粉磨陶瓷原料的各种型式、规格的湿法间歇式球磨机。

Ball mill for ceramic industry

ICS
81.100
CCS
Y93
发布
1995-05-08
实施
1996-01-01

この規格は,浴槽について規定する。

Bathtubs

ICS
91.140.70
CCS
Y93
发布
1994-02-01
实施

本标准规定了日用陶瓷机械产品的型号编制原则。 本标准适用于日用陶瓷机械产品(以下简称“产品”)的型号编制。其他陶瓷机械产品的型号编制也可参照使用。

Model preparation method of daily-use ceramic machinery products

ICS
CCS
Y93
发布
1993-04-15
实施
1993-12-01

本标准规定了湿式磁选机的产品分类、技术要求、试验方法和检验规则。 本标准适用于日用陶瓷工业用的湿式磁选机(以下简称“磁选机”),建材陶瓷和电瓷工业用磁选机亦可参照本标准。

Wet magnetic separator

ICS
CCS
Y93
发布
1993-04-15
实施
1993-12-01

本标准规定了液压自动压砖机(以下简称“压砖机”)的产品分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于建筑陶瓷墙地砖粉料压力成型的压砖机。

Hydraulic automatic brick press

ICS
CCS
Y93
发布
1993-04-15
实施
1993-12-01

Safety of household and similar electrical appliances; part 2: particular requirements for whirlpool baths and similar equipment

ICS
CCS
Y93
发布
1992-11
实施

本标准规定了螺旋桨搅拌机(简称“搅拌机”)的基本参数、技术要求、试验方法和检验规则。 本标准适用于陶瓷工业用来搅拌泥浆和潮解泥料的搅拌机。

propeller mixer

ICS
CCS
Y93
发布
1991-03-30
实施
1991-12-01

本标准规定了液压推车机(简称“推车机”),的基本参数、技术要求、试验方法和检验规则。 本标准适用于陶瓷工业及耐火材料工业的窑车式隧道窑推车机。

Hydraulic cart machine

ICS
CCS
Y93
发布
1991-03-30
实施
1991-12-01

本标准规定了链式干燥机(以下简称“链干机”)的基本参数、技术要求、试验方法与检验规则。 本标准主要适用于日用陶瓷工业生产用链干机。

chain dryer

ICS
CCS
Y93
发布
1991-03-30
实施
1991-12-01



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号