共找到 1511 条与 金属无损检验方法 相关的标准,共 101 页
Ultrasonic inspection method for deformed aluminum and magnesium alloy products
Ultrasonic testing method for copper and copper alloy rods
本标准规定了圆钢的无损检测方法。
Eddy current testing method for round steel
Non-destructive testing of steel pipes Automatic ultrasonic testing of longitudinal and/or transverse imperfections in welded steel pipe welds
Non-destructive testing of steel tubes Magnetic particle testing of ferromagnetic seamless and welded steel tubes for surface imperfections
Non-destructive testing of steel tubes Automatic ultrasonic testing of seamless and welded steel tubes for lamination imperfections
Non-destructive testing of steel pipes Automatic ultrasonic testing of steel strip/steel plate lamination flaws for welded steel pipes
Non-destructive testing of steel pipes Liquid penetrant testing of seamless and welded steel pipes for surface imperfections
本文件规定了无缝钢管相控阵超声检测的仪器和设备、试块、检测方法、设备设置、检测程序、验收、记录和报告。 本文件适用于外径不小于6 mm 且壁厚与外径之比不大于0.2 的无缝钢管(以下简称“钢管”)缺欠
Ultrasonic phased array testing method for seamless steel tubes
本文件规定了锻轧钢棒(以下简称“钢棒”)超声检测的一般要求、仪器和设备、对比试块、检测规程、检测程序、检测结果评定、质量等级、检测记录和检测报告。 本文件适用于直径不小于6 mm 的钢棒超声脉冲反射法检测,其他规格或材质的锻轧棒材或非棒材可参照使用。 本文件不适用于奥氏体粗晶钢棒的检测。
Method for ultrasonic testing of forged and rolled steel bars
本文件规定了自动熔化电弧焊钢管直焊缝和螺旋焊缝缺欠的X射线(胶片)照相的检测要求。 本文件也适用于圆形空心型材的检测。 注1:数字射线检测作为本检测方法的代替方法,见ISO10893 7。 注2:对接焊缝的射线检测可参照执行。
Non-destructive testing of steel tubes—Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
本文件规定了自动熔化电弧焊钢管直焊缝或螺旋焊缝缺欠的X射线数字检测技术的要求,包括计算机射线检测(CR)或数字探测器阵列(DDAS)的射线检测。 本文件也规定了数字射线检测的验收级别和校准程序。 本文件也适用于圆形空心型材的检测。[]注:该数字射线检测方法作为胶片X射线检测的替代方法,见ISO10893 68 。
Non-destructive testing of steel tubes—Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
本标准规定了压水堆核燃料组件和相关组件用不锈钢棒、板、锻件的超声波检测的一般要求、仪器和探头、对比试块、检测程序、结果判定和记录及检验报告。本标准适用于压水堆核燃料组件和相关组件用不锈钢棒、板、锻件的超声波检测。不锈钢棒检测直径9mm~70mm,不锈钢板检测厚度为9mm~50mm,不锈钢锻件检测厚度小于或等于400mm。其他规格或材质的金属棒、板、锻件也可参照使用。
Ultrasonic testing method for stainless steel bars, plates and forgings of PWR nuclear fuel assembly and associated assembly
本文件规定了冷拉圆钢表面超声检测的检测原理、检测方法、检测人员资格、检测设备和器材、检测的实施,以及对比试样、检测结果的评定、检测记录与检测报告等。 本文件适用于直径6mm~80mm的冷拉圆钢表面及近表面纵向不连续的超声检测。其他热轧后加工成银亮表面的圆钢的超声检测也可参照本文件执行。
Ultrasonic testing method for the surface of cold drawn round steel
本文件规定了用于确认无缝和焊接钢管(埋弧焊除外)水压密实性的自动电磁检测方法。涡流检测法适用于外径大于或等于4mm的钢管,漏磁检测法适用于外径大于10mm的钢管。 本文件也适用于空心型材的检测。 注:采用漏磁法的电磁检测不适用于奥氏体不锈钢管。
Nondestructive testing of steel tubes—Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness
本标准规定了X射线衍射法测定立方晶系难炊金属单品晶向与宏观样品表面法向夹角的方法。本标准适用于立方品系难金属单唱晶向与宏观样品表面法向夹角的测定。
Determination for the orientation of refractory metal single crystal
本标准规定了轴承钢中大夹杂物超声检测方法的检测要求、检测设备、设备校验、检测过程、评价及检测报告。 本标准适用于液浸式脉冲反射法纵波入射探头 ,检测直径或边长为 35 mm一100 mm 的轴承钢棒材中内部夹杂物。其他斥才或钢种材料也可参照执行。
Method of ultrasonic testing for large inclusions in bearing steel
本标准规定了钛及钛合金加工产品超声检验的原理、试验条件、仪器设备、样品、对比试块、试验步骤、试验结果的评定、检测记录和报告。本标准适用于横截面厚度6 mm~500 mm 的钛及钛合金加工产品的超声检验,其他规格的钛及钛合金加工产品可参照执行。
Method of ultrasonic inspection for wrought titanium and titanium alloy products
Method of ultrasonic testing for round steel
Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号