01.040.19 试验 (词汇) 标准查询与下载



共找到 27 条与 试验 (词汇) 相关的标准,共 2

Non-destructive testing—Terminology—Terms used in magnetic flux leakage testing

ICS
01.040.19
CCS
J04
发布
2017-09-29 00:00:00.0
实施
2018-04-01 00:00:00.0

GB/T 6247的本部分界定了性能试验通用术语,凿岩机械、手持便携式动力工具和气动机械等产品性能试验的专业术语。本部分适用于凿岩机械、气动工具和液压工具等便携式动力工具以及气动机械。本部分不包括凿岩机械、气动工具和液压工具产品的有关振动和噪声试验的术语,也不包括除气动马达以外的其他气动机械性能试验的术语。

Rock drilling machines and portable power tools.Terminology.Part 4:Performance test

ICS
01.040.19
CCS
J48;J84
发布
2013-12-31
实施
2014-10-01

本标准界定了声发射检测的术语。

Non-destructive testing.Terminology-Terms used in acoustic emission testing

ICS
01.040.19
CCS
H26
发布
2005-06-08
实施
2005-12-01

本标准规定了在中子检测的一般概念,中子检测设备、器件和材料,中子检测方法中使用的术语。 本标准适用于中子检测。供制订标准和指导性技术文件及编写和翻译教材、图书、刊物等出版物时使用。

Terminology for nondestructive testing--Neutron testing

ICS
01.040.19
CCS
J04
发布
1995-12-20
实施
1996-08-01

本标准规定了在泄漏检测的一般概念,泄漏检测设备、器件和材料,泄漏检测方法中使用的术语。 本标准适用于泄漏检测。供制定标准和指导性技术文件及编写和翻译教材、图书、刊物等出版物时使用。

Terminology for nondestructive testing--Leak testing

ICS
01.040.19
CCS
J04
发布
1995-12-20
实施
1996-08-01

3.1x00a0;This standard is a subsidiary to Terminology E456. 3.2x00a0;It provides definitions, descriptions, discussion, and comparison of terms. 1.1x00a0;This standard includes those statistical items related to the area of design of experiments for which standard definitions appear desirable.

Standard Terminology Relating to Design of Experiments

ICS
01.040.19
CCS
发布
2016
实施

3.1x00a0;The terms found in this standard are intended to be used uniformly and consistently in all nondestructive testing standards. The purpose of this standard is to promote a clear understanding and interpretation of the NDT standards in which they are used. 1.1x00a0;This standard defines the terminology used in the standards prepared by the E07 Committee on Nondestructive Testing. These nondestructive testing (NDT) methods include: acoustic emission, electromagnetic testing, gamma- and X-radiology, leak testing, liquid penetrant testing, magnetic particle testing, neutron radiology and gauging, ultrasonic testing, and other technical methods. 1.2x00a0;Committee E07 recognizes that the terms examination, testing and inspection are commonly used as synonyms in nondestructive testing. For uniformity and consistency in E07 nondestructive testing standards, Committee E07 encourages the use of the term examination and its derivatives when describing the application of nondestructive test methods. There are, however, appropriate exceptions when the term test and its derivatives may be used to describe the application of a nondestructive test, such as measurements which produce a numeric result (for example, when using the leak testing method to perform a leak test on a component, or an ultrasonic measurement of velocity). Additionally, the term test should be used when referring to the NDT method, that is, Radiologic Testing (RT), Ultrasonic Testing (UT), and so forth. (Example: Radiologic Testing (RT) is often used to examine material to detect internal discontinuities.) 1.3x00a0;Section A defines terms that are common to multiple NDT methods, whereas, the subsequent sections define terms pertaining to specific NDT methods. 1.4x00a0;As shown on the chart below, when nondestructive testing produces an indication, the indication is subject to interpretation as false, nonrelevant or relevant. If it has been interpreted as relevant, the necessary subsequent evaluation will result in the decision to accept or reject the material. With the exception of accept and reject, which retain the meaning found in most dictionaries, all the words used in the chart are defined in Section A.

Standard Terminology for Nondestructive Examinations

ICS
01.040.19
CCS
发布
2016
实施

3.1x00a0;The terms found in this standard are intended to be used uniformly and consistently in all nondestructive testing standards. The purpose of this standard is to promote a clear understanding and interpretation of the NDT standards in which they are used. 1.1x00a0;This standard defines the terminology used in the standards prepared by the E07 Committee on Nondestructive Testing. These nondestructive testing (NDT) methods include: acoustic emission, electromagnetic testing, gamma- and X-radiology, leak testing, liquid penetrant testing, magnetic particle testing, neutron radiology and gauging, ultrasonic testing, and other technical methods. 1.2x00a0;Committee E07 recognizes that the terms examination, testing and inspection are commonly used as synonyms in nondestructive testing. For uniformity and consistency in E07 nondestructive testing standards, Committee E07 encourages the use of the term examination and its derivatives when describing the application of nondestructive test methods. There are, however, appropriate exceptions when the term test and its derivatives may be used to describe the application of a nondestructive test, such as measurements which produce a numeric result (for example, when using the leak testing method to perform a leak test on a component, or an ultrasonic measurement of velocity). Additionally, the term test should be used when referring to the NDT method, that is, Radiologic Testing (RT), Ultrasonic Testing (UT), and so forth. (Example: Radiologic Testing (RT) is often used to examine material to detect internal discontinuities.) 1.3x00a0;Section A defines terms that are common to multiple NDT methods, whereas, the subsequent sections define terms pertaining to specific NDT methods. 1.4x00a0;As shown on the chart below, when nondestructive testing produces an indication, the indication is subject to interpretation as false, nonrelevant or relevant. If it has been interpreted as relevant, the necessary subsequent evaluation will result in the decision to accept or reject the material. With the exception of accept and reject, which retain the meaning found in most dictionaries, all the words used in the chart are defined in Section A.

Standard Terminology for Nondestructive Examinations

ICS
01.040.19
CCS
发布
2016
实施

本标准适用于下列四类试验,对于不属于以上四类的试验,若其部分内容在本标准中做了规定,则这部分内容应符合本标准的要求: --作物及林、草蒸发蒸腾量观测试验; --作物及林、草灌溉制度试验; --作物劣态试验和灌溉效益试验; --灌水方法及灌水技术试验。

Specifications for irrigation experiment

ICS
01.040.19
CCS
A21
发布
2015-02-16
实施
2015-05-16

3.1x00a0;The terms used in describing hydrogen embrittlement have precise definitions. The terminology and its proper usage must be completely understood to communicate and transfer information adequately within the field. 3.2x00a0;The terms defined in other terminology standards, are respectively identified in parentheses following the definition. 1.1x00a0;This terminology covers the principal terms, abbreviations, and symbols relating to mechanical methods for hydrogen embrittlement testing, which are present in more than one of the standards under the jurisdiction of ASTM Committee F07 on Aerospace and Aircraft. These definitions are published to encourage uniformity of terminology in product specifications.

Standard Terminology Relating to Hydrogen Embrittlement Testing

ICS
01.040.19
CCS
发布
2015
实施

1.1x00a0;This terminology covers the principal terms relating to methods of mechanical testing of solids. The general definitions are restricted and interpreted, when necessary, to make them particularly applicable and practicable for use in standards requiring or relating to mechanical tests. These definitions are published to encourage uniformity of terminology in product specifications. 1.2x00a0;Terms relating to fatigue and fracture testing are defined in Terminology E1823.

Standard Terminology Relating to Methods of Mechanical Testing

ICS
01.040.19
CCS
发布
2015
实施

3.1x00a0;The terms found in this standard are intended to be used uniformly and consistently in all nondestructive testing standards. The purpose of this standard is to promote a clear understanding and interpretation of the NDT standards in which they are used. 1.1x00a0;This standard defines the terminology used in the standards prepared by the E07 Committee on Nondestructive Testing. These nondestructive testing (NDT) methods include: acoustic emission, electromagnetic testing, gamma- and X-radiology, leak testing, liquid penetrant testing, magnetic particle testing, neutron radiology and gauging, ultrasonic testing, and other technical methods. 1.2x00a0;Committee E07 recognizes that the terms examination, testing and inspection are commonly used as synonyms in nondestructive testing. For uniformity and consistency in E07 nondestructive testing standards, Committee E07 encourages the use of the term examination and its derivatives when describing the application of nondestructive test methods. There are, however, appropriate exceptions when the term test and its derivatives may be used to describe the application of a nondestructive test, such as measurements which produce a numeric result (for example, when using the leak testing method to perform a leak test on a component, or an ultrasonic measurement of velocity). Additionally, the term test should be used when referring to the NDT method, that is, Radiologic Testing (RT), Ultrasonic Testing (UT), and so forth. (Example: Radiologic Testing (RT) is often used to examine material to detect internal discontinuities.) 1.3x00a0;Section A defines terms that are common to multiple NDT methods, whereas, the subsequent sections define terms pertaining to specific NDT methods. 1.4x00a0;As shown on the chart below, when nondestructive testing produces an indication, the indication is subject to interpretation as false, nonrelevant or relevant. If it has been interpreted as relevant, the necessary subsequent evaluation will result in the decision to accept or reject the material. With the exception of accept and reject, which retain the meaning found in most dictionaries, all the words used in the chart are defined in Section A.

Standard Terminology for Nondestructive Examinations

ICS
01.040.19
CCS
发布
2015
实施

Standard Terminology Relating to Design of Experiments

ICS
01.040.19
CCS
发布
2015
实施

本标准规定了检验水利水电起重机(以下简称“起重机”)应遵循的试验程序及检验方法。本标准适用于水利水电工程永久性和工程建设用的桥式起重机、门式起重机(含门式启闭机)、门座起重机、缆索起重机。固定卷扬式和液压启闭机可参照执行。本标准不适用于流动式起重机及浮式起重机。

Test method of cranes for water conservancy and hydroelectric power

ICS
01.040.19
CCS
A21
发布
2013-02-04
实施
2013-05-04

Technical diagnostics. Acoustic emission diagnostic. Terms, definitions and symbols

ICS
01.040.19
CCS
发布
2012
实施
2014-01-01

이 규격은 공업 분야에서 사용하는 비파괴 시험에 관한 주요 용어와 그 정의에 대하여 규정한

Glossary of terms in nondestuctive testing

ICS
01.040.19
CCS
J30
发布
2006-11-08
实施
2006-11-08

Terminology definition which related to low cycle fatigue testing on constant amplitudo

ICS
01.040.19
CCS
发布
1996
实施

Terms and definitions related to electromagnetic testing

ICS
01.040.19
CCS
发布
1996
实施

本标准规定非破坏检测中之超音波检测所用之词汇及其说明,并列出相对应之英文名词以供参考。

Glossary of Terms Related to Nondestructive Testing (Ultrasonic Testing Terms)

ICS
01.040.19
CCS
发布
1994-01-25
实施
1994-01-25

Definition of terms related to mechanical test method

ICS
01.040.19
CCS
发布
1994
实施



Copyright ©2007-2016 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号