01.040.91;91.080.40 标准查询与下载

BS EN 1504-10:2017 用于保护和修复混凝土结构的产品和系统 定义、要求、质量控制和合格评定 产品和系统的现场应用及工程质量控制

Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Site application of products and systems and quality control of the works

BS EN 1504-9:2009 混凝土结构的保护和修缮用产品和系统 合格的定义、要求、质量控制和评估 第9部分：产品和系统使用的一般原则

Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - General principles for use of products and systems

BS EN 1504-9:2008 混凝土结构的保护和修缮用产品和系统.合格的定义,要求,质量控制和评估.第9部分:产品和系统使用的一般原则

This Part of EN 1504 sets out basic considerations for specification of protection and repair of reinforced and unreinforced concrete structures (including, for example, pavements, runways, floor slabs and pre-stressed structures) using products and systems specified in other Parts of the EN 1504 series or any other relevant European Standard or European Technical Approval. This European Standard covers atmospherically exposed, buried and submerged structures. This European Standard includes: a) the need for inspection, testing and assessment before and after repair; b) protection from causes of defects and their repair in concrete structures. Causes of such defects may include: 1) mechanical actions, e.g. impact, overloading, movement caused by settlement, blast, vibration and seismic actions; 2) chemical and biological actions from environments, e.g. sulphate attack, alkali aggregate reaction; 3) physical actions, e.g. freeze-thaw, thermal cracking, moisture movement, salt crystallisation and erosion; 4) fire damage; 5) reinforcement corrosion resulting from: i) physical loss of the protective concrete cover; ii) chemical loss of alkalinity in the protective concrete cover as a result of reaction with atmospheric carbon dioxide (carbonation); iii) chloride (or other chemical) contamination of the concrete; iv) stray electrical currents conducted or induced in the reinforcement from neighbouring electrical installations. c) repair of defects caused by inadequate design, specification or construction or use of unsuitable construction materials; d) providing the required structural capacity by: 1) replacement or addition of embedded or external reinforcement; 2) filling of cracks and voids within or between elements to ensure structural continuity; 3) replacement or addition of concrete or whole elements; e) waterproofing as an integral part of protection and repair; f) principles and methods of protection and repair, for example those listed in Table 1. Site application is covered in Part 10 of this European Standard. Further background information on the scope of this European Standard is given in Annex A (Informative).

Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9:General principles for use of products and systems

DIN EN 1504-9:2008 混凝土结构的保护和维修用产品和设备.定义、要求、质量控制和一致性评估.第9部分:产品和设备使用的通用原则

This Part of EN 1504 sets out basic considerations for specification of protection and repair of reinforced and unreinforced concrete structures (including, for example, pavements, runways, floor slabs and pre-stressed structures) using products and systems specified in other Parts of the EN 1504 series or any other relevant European Standard or European Technical Approval. This European Standard covers atmospherically exposed, buried and submerged structures. This European Standard includes: a) the need for inspection, testing and assessment before and after repair; b) protection from causes of defects and their repair in concrete structures. Causes of such defects may include: 1) mechanical actions, e.g. impact, overloading, movement caused by settlement, blast, vibration and seismic actions; 2) chemical and biological actions from environments, e.g. sulphate attack, alkali aggregate reaction; 3) physical actions, e.g. freeze-thaw, thermal cracking, moisture movement, salt crystallisation and erosion; 4) fire damage; 5) reinforcement corrosion resulting from: i) physical loss of the protective concrete cover; ii) chemical loss of alkalinity in the protective concrete cover as a result of reaction with atmospheric carbon dioxide (carbonation); iii) chloride (or other chemical) contamination of the concrete; iv) stray electrical currents conducted or induced in the reinforcement from neighbouring electrical installations. c) repair of defects caused by inadequate design, specification or construction or use of unsuitable construction materials; d) providing the required structural capacity by: 1) replacement or addition of embedded or external reinforcement; 2) filling of cracks and voids within or between elements to ensure structural continuity; 3) replacement or addition of concrete or whole elements; e) waterproofing as an integral part of protection and repair; f) principles and methods of protection and repair, for example those listed in Table 1. Site application is covered in Part 10 of this European Standard. Further background information on the scope of this European Standard is given in Annex A (Informative).

Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems; English version of DIN EN 1504-9:2008-11

DIN EN 1504-6:2006 混凝土结构保护和维修用产品和系统.定义、要求、质量控制和合格评定.第6部分:修补钢棒的锚定

This part of EN 1504 specifies requirements for the identification, performance (including durability) and safety of products and systems to be used for the anchoring of reinforcing steel (rebar) as used for structural strengthening to ensure the continuity of reinforced concrete structures. This Part of EN 1504 covers the fields of application in accordance with repair method 4.2 of ENV 1504-9:1997. NOTE It is assumed that a proper structural assessment of the structural elements to be subjected to repair is carried out by qualified engineers and that the choice of the products and systems to be used as well as the design are based on this assessment.

Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar; English version of DIN EN 1504-6:2006-11

DIN EN 1504-7:2006 混凝土结构保护和维修用产品和系统.定义、要求、质量控制和合格评定.第7部分:防侵蚀加固

This Part of EN 1504 specifies requirements for the identification and the performance (including durability aspects) of products and systems for active and barrier coatings for protection of existing uncoated steel reinforcement and embedded steel in concrete structures under repair. This standard does not cover products for corrosion protection of pre-stressing steels and stainless steels.

Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection; English version of DIN EN 1504-7:2006-11

DIN EN 1504-10 Corrigendum 1:2006 混凝土结构养护和用品和系统. 定义, 要求, 质量控制和合格评定. 第10部分: 建筑工地材料和系统的应用, 施工质量控制. 为英文版本DIN EN 1504-10: 2004-05的勘误表1

Products and systems for the protection and repair of concrete structures - Definitions,requirements,quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works corrigendum 1 to English

DIN EN 1504-10 Berichtigung 1:2006 混凝土结构的保护和维修用产品和系统.定义、要求、质量控制和合格评价.第10部分:产品和系统的现场应用以及工程的质量控制

Products and systems for the protection and repair of concrete structures - Definitions, Requirements, Quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works; German version EN 150

DIN EN 1504-3:2006 混凝土结构的保护和维修用产品和系统.定义、要求、质量控制和合格评价.第3部分:结构和非结构修理.德文版本EN 1504-3-2005

This European Standard specifies requirements for the identification, performance (including durability) and safety of products and systems to be used for the structural and non-structural repair of concrete structures. This European Standard covers repair mortars and concretes, possibly used in conjunction with other products and systems, to restore and/or to replace defective concrete and to protect reinforcement, necessary to extend the service life of a concrete structure exhibiting deterioration. The fields of application covered are in accordance with ENV 1504-9 as follows: Principle 3 Concrete restoration Method 3.1 Applying mortar by hand Method 3.2 Recasting with concrete Method 3.3 Spraying mortar or concrete Principle 4 Structural strengthening Method 4.4 Adding mortar or concrete Principle 7 Preserving or restoring Method 7.1 Increasing cover to reinforcement with mortar or passivity concrete Method 7.2 Replacing contaminated concrete

Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair; English version of DIN EN 1504-3:2006-03

BS EN 1504-1:2005 混凝土结构保护和维修用产品和系统.定义、要求、质量控制和一致性评估.第1部分:定义

This European Standard defines terms relating to products and systems for repair, for use in maintenance and protection, restoration and strengthening of concrete structures.

Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions

BS EN 1504-1:2006 混凝土结构保护和维修用产品和系统 定义、要求、质量控制和一致性评估 第1部分：定义

Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Definitions

DIN EN 1504-1:2005 混凝土结构的保护和修理用产品和系统.定义、要求、质量控制和合格评价.第1部分:定义

This European Standard defines terms relating to products and systems for repair, for use in maintenance and protection, restoration and strengthening of concrete structures.

Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions; German version EN 1504-1:2005

BS EN 1504-2:2004 混凝土结构保护和维修用产品和系统.定义,要求,质量控制和合格评估.混凝土表面防护系统

This document specifies requirements for the identification, performance (including durability aspects), safety and evaluation of conformity of products and systems to be used for surface protection of concrete, to increase the durability of concrete and reinforced concrete structures, as well as for new concrete and for maintenance and repair work. The surface protective methods covered by this document are the following: — hydrophobic impregnation; — impregnation; — coating. Flooring systems in buildings which are not intended to protect or reinstate the integrity of a concrete structure are standardised in EN 13813. When products and systems complying with this standard are used in flooring applications that involve substantial mechanical loading, they should also satisfy the requirements of EN 13813.

Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Surface protection systems for concrete

DIN EN 1504-10:2004 混凝土结构的保护和维修用产品和系统.定义、要求、质量控制和合格评价.第10部分:产品和系统的现场应用以及工程的质量控制

This part of EN 1504 gives requirements for substrate condition before and during application including structural stability, storage, the preparation and application of products and systems for the protection and repair of concrete structures including quality control, maintenance, health and safety, and the environment.#,,#

Products and systems for the protection and repair of concrete structures - Definitions, Requirements, Quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works; German version EN 150

NF P18-901-10:2004 混凝土结构物的保护和修理用产品和系统.定义、要求、质量控制和一致性评定.第10部分:产品和系统的现场应用和工程的质量控制

Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10 : site application of products and systems and quality control of the works.

BS EN 1504-10:2003 混凝土结构保护和维修用产品和系统.定义.要求.质量控制和一致性评估.第10部分:产品和系统的现场应用及工程的质量控制

This part of EN 1504 gives requirements for substrate condition before and during application including structural stability, storage, the preparation and application of products and systems for the protection and repair of concrete structures including quality control, maintenance, health and safety, and the environment.

Products and systems for the protection and repair of concrete structures - Definitions - Requirements - Quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works

BS EN 1504-10:2004 混凝土结构保护和维修用产品和系统 定义 要求 质量控制和一致性评估 第10部分：产品和系统的现场应用及工程的质量控制

Products and systems for the protection and repair of concrete structures - Definitions - Requirements - Quality control and evaluation of conformity - Site application of products and systems and quality control of the works