03.100.30;19.100 标准查询与下载
共找到 32 条与 相关的标准，共 3 页
本标准规定了工业无损检测(NDT)人员资格鉴定与认证的原则要求。 本标准规定的体系也能适用于其他NDT方法或已界定为一种NDT方法的新技术，但前提是要有一个完整的认证方案，并且这一方法或技术是已被国际、区域或国家标准所涵盖的，或者这一新的NDT方法或技术已被证明是有效的且令认证机构满意的。 本标准的认证涵盖了以下一种或多种方法的能力： a) 声发射检测； b) 涡流检测； c) 红外热成像检测； d) 泄漏检测(不包括水压试验)； e) 磁粉检测； f) 渗透检测； g) 射线照相检测； h) 应变检测； i) 超声检测； j) 目视检测(不包括直接目视检测以及应用其他NDT方法时所采用的目视检查)。
Non-destructive testing.Qualification and certification of NDT personnel
- ICS
- 03.100.30;19.100
- CCS
- J04
- 发布
- 2015-12-10
- 实施
- 2016-07-01
本指导性技术文件规定了无损检测考试用检测试样中不连续的类型。 声发射检测.红外热成像检测,应变检测和泄漏检测不必规定不连续的类型,因为它们的情况特殊(例如AT用人工声源代替)。
Non-destructive testing.Discontinuities in specimens for use in qualification examinations
- ICS
- 03.100.30;19.100
- CCS
- J04
- 发布
- 2015-10-09
- 实施
- 2016-06-01
本标准针对所实施的无损检测(NDT)是有限应用的、重复性的或自动化工作的检测人员，建立了人员资格鉴定体系，例如： a)材料的涡流和电磁分选； b)制造过程中管类产品的涡流和电磁检测； c)制造过程中板材的直射超声检测； d)超声测厚； e)钢丝绳电磁检测。 这些举例并不是在限定本标准可能涵盖的其他资格鉴定范围。 本标准不适用于磁粉检测(MT)或渗透检测(PT)。 如果产品标准、条例、法规或规范中规定无损检测人员需经资格鉴定，而检测的属性是有限范围或自动的，那么按GB/T 9445要求进行资格鉴定是不恰当或是过分的，按本标准进行资格鉴定是可以满足要求的。 本标准所述要求只适用于特殊应用的NDT人员的资格鉴定，不宜与GB/T 9445定义的NDT等级直接等同。然而，建议按本标准资格鉴定的人员，最好在按GB/T 9445取得认证的2级或3级NDT人员的监督下工作。
Non-destructive testing.Qualification of personnel for limited application of non-destructive testing
- ICS
- 03.100.30;19.100
- CCS
- J04
- 发布
- 2015-10-09
- 实施
- 2016-06-01
本标准规定了无损检测（NDT）人员资格鉴定与认证。本标准适用于下列一种或多种方法： a）声发射检测； b）涡流检测； c）红外热成像检测； d）泄漏检测（不包括水压试验）； e）磁粉检测； f）渗透检测； g) 射线照相检测； h）应变检测； i）超声检测。 j）目视检测（包括直接目视检测以及应用其他无损检测方法时所采用的目视检测）。 本标准的认证，提供了NDT操作人员通用能力的证明。但这并不代表操作授权，因为那是雇主的责任——经认证的雇员可能需要补充雇主方面的诸如设备、NDT工艺规程、原材料和产品等特性的专门知识。当法规和规范有要求时，操作授权由雇主根据质量工艺规程签发，该质量工艺规程规定了雇主必需的职位专业培训和考试，以验证持证人员了解被检产品所涉及的工业规范、标准、NDT工艺规程、设备和验收准则等相关知识。 本标准规定的体系也适用于具有独立认证程序的其他NDT方法。
Non-destructive testing.Qualification and certification of personnel
- ICS
- 03.100.30;19.100
- CCS
- J04
- 发布
- 2008-05-13
- 实施
- 2008-11-01
本标准建立了一个由认证机构对应用下列方法从事工业无损检测（NDT）的人员进行资格鉴定和认证的体系： a) 涡流检测； b) 渗透检测； c) 磁粉检测； d) 射线照相检测； e) 超声检测。 本标准所述的体系也可适用于已具有独立认证程序的目视检测（VT）、泄漏检测（LT）、中子辐射照相检测（NT）、声发射检测（AT）和其他NDT方法。 只要在本标准的准则范围之内，认证机构有权规定一些特定的要求。
Non-destructive testing.Qualification and certification of personnel
- ICS
- 03.100.30;19.100
- CCS
- J04
- 发布
- 2005-09-22
- 实施
- 2006-03-01
Non-destructive testing. Qualification of personnel for limited applications of non-destructive testing
- ICS
- 03.100.30;19.100
- CCS
- J04
- 发布
- 2015
- 实施
- 2016-06-01
이 표준은 산업적인 비파괴 검사(NDT)를 수행하는 기술자에 대한 자격 인정 및 인증에 관한 요건을 기술한다.
Non-destructive testing — Qualification and certification of NDT personnel
- ICS
- 03.100.30;19.100
- CCS
- H26
- 发布
- 2014-10-20
- 实施
- 2014/10/20
Non-destructive testing - Qualification and certification of NDT personnel; Supplement 1: Recommendations on the application of DIN EN ISO 9712:2012-12
- ICS
- 03.100.30;19.100
- CCS
- N70
- 发布
- 2014-05
- 实施
This Standard specifies requirements for principles for the qualification and certification of personnel who carries out the industrial non-destructive testing (hereafter referred to as "NDT").
Non-destructive testing -- Qualification and certification of NDT personnel
- ICS
- 03.100.30;19.100
- CCS
- H26
- 发布
- 2013-06-20
- 实施
This International Standard specifies requirements for principles for the qualification and certification of personnel who perform industrial non-destructive testing (NDT). NOTE 1 The term “industrial” implies the exclusion of applications in the field of medicine. The system specified in this International Standard can also apply to other NDT methods or to new techniques within an established NDT method, provided a comprehensive scheme of certification exists and the method or technique is covered by International, regional or national standards or the new NDT method or technique has been demonstrated to be effective to the satisfaction of the certification body.
Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012); German version EN ISO 9712:2012
- ICS
- 03.100.30;19.100
- CCS
- A18
- 发布
- 2012-12
- 实施
Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012)
- ICS
- 03.100.30;19.100
- CCS
- 发布
- 2012-10-17
- 实施
- 2012-10-17
Non-destructive testing - Qualification and certification of NDT personnel.
- ICS
- 03.100.30;19.100
- CCS
- N70
- 发布
- 2012-08-01
- 实施
- 2012-08-18
Non-destructive testing. Qualification and certification of NDT personnel
- ICS
- 03.100.30;19.100
- CCS
- A18
- 发布
- 2012-06-30
- 实施
- 2012-06-30
This International Standard specifies requirements for principles for the qualification and certification ofpersonnel who perform industrial non-destructive testing (NDT).
Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012)
- ICS
- 03.100.30;19.100
- CCS
- 发布
- 2012-06-01
- 实施
This International Standard specifies requirements for principles for the qualification and certification of personnel who perform industrial non-destructive testing (NDT). NOTE 1 The term “industrial” implies the exclusion of applications in the field of medicine. The system specified in this International Standard can also apply to other NDT methods or to new techniques within an established NDT method, provided a comprehensive scheme of certification exists and the method or technique is covered by International, regional or national standards or the new NDT method or technique has been demonstrated to be effective to the satisfaction of the certification body. NOTE 2 CEN/TR 14748[5] can be used as guidance. The certification covers proficiency in one or more of the following methods: a) acoustic emission testing; b) eddy current testing; c) infrared thermographic testing; d) leak testing (hydraulic pressure tests excluded); e) magnetic testing; f) penetrant testing; g) radiographic testing; h) strain gauge testing; i) ultrasonic testing; j) visual testing (direct unaided visual tests and visual tests carried out during the application of another NDT method are excluded). NOTE 3 This International Standard specifies requirements for what are, in effect, third party conformity assessment schemes. These requirements do not directly apply to conformity assessment by second or first parties, but relevant parts of this International Standard can be referred to in such arrangements. NOTE 4 Wherever gender specific words such as “his”, “her”, “he” or “she” appear in this International Standard, the other gender is also applicable.
Non-destructive testing - Qualification and certification of NDT personnel
- ICS
- 03.100.30;19.100
- CCS
- A18
- 发布
- 2012-06
- 实施
Non-destructive testing - Performance-based qualification
- ICS
- 03.100.30;19.100
- CCS
- H26
- 发布
- 2011-11
- 实施
Non-destructive testing. Qualification and certification of personnel. General principles
- ICS
- 03.100.30;19.100
- CCS
- 发布
- 2011
- 实施
- 2013-01-01
Specifies the qualification and certification of personnel involved in non-destructive testing (NDT).
Non-destructive testing - Qualification and certification of personnel
- ICS
- 03.100.30;19.100
- CCS
- H26;A18
- 发布
- 2009-09-11
- 实施
This European Standard establishes principles for the qualification and certification of personnel who perform industrial non-destructive testing (NDT). The term ‘industrial’ implies the exclusion of applications in the field of medicine. The system described in this European Standard can also apply to other NDT methods, or to new techniques within an established NDT method, provided a comprehensive scheme of certification exists and the method or technique is covered by European, international or national standards, or the new NDT method or technique has been demonstrated as effective through a formal qualification carried out in accordance with CEN/TR 14748. NOTE 1 Wherever gender specific words such as "his", "her", "he" or "she" appear in this standard, the other gender is also applicable. When certification of NDT personnel is defined in product standards, regulations, codes or specifications, it is recommended to certify the personnel in accordance with this European Standard. NOTE 2 The methodology for “Approval” of NDT personnel is not specified in Directive 97/23/EC [4] and it was agreed that guidance was required in order to ensure a consistent approach to the application of the Directive and the implementation of Working Group Pressure guideline 6/13 [5] by Recognised Third Party Organisations (RTPO). As a result a Code of Practice was developed as Technical Report CEN/TR 15589 [3]. The certification covers proficiency in one or more of the following methods: a) acoustic emission testing; b) eddy current testing; c) leak testing (hydraulic pressure tests excluded); d) magnetic particle testing; e) penetrant testing; f) radiographic testing; g) ultrasonic testing; h) visual testing (direct unaided visual tests and visual tests carried out during the application of another NDT method are excluded).
Non-destructive testing - Qualification and certification of NDT personnel - General principles
- ICS
- 03.100.30;19.100
- CCS
- 发布
- 2008-06-01
- 实施
Non-destructive testing - Qualification of personnel for limited application of non-destructive testing
- ICS
- 03.100.30;19.100
- CCS
- 发布
- 2008
- 实施
