13.060.45 水检验综合 标准查询与下载



共找到 303 条与 水检验综合 相关的标准,共 21

本文件界定了地下水监测点布设评估的术语和定义,规定了地下水监测点布设评估的基本要求、水文地质环境调查、监测功能评估、监测点布设评估、现状地下水监测点水质评估、优化布点建议和提交成果。 本文件适用于地下水监测点布设评估。

Evaluation Specification for Layout of Groundwater Monitoring Points

ICS
13.060.45
CCS
M746
发布
2024-03-25
实施
2024-05-05

本文件界定了地下水型集中式饮用水水源地下水环境监测现状调查涉及的术语和定义,规定了地下水型集中式饮用水水源地下水环境监测现状调查的工作内容、工作流程和技术要求。 本文件适用于地下水型集中式饮用水水源地下水环境监测现状调查工作,包括城镇水源和农村水源。

Technical specifications for investigating the current status of groundwater environmental monitoring in the centralized groundwater drinking water sources

ICS
13.060.45
CCS
M746
发布
2024-03-25
实施
2024-05-05

本文件描述了生活饮用水和水源水中总大肠菌群、耐热大肠菌群和大肠埃希氏菌的荧光光度测定法。

Determination of total coliforms, thermotolerant coliforms and Escherichia coli in drinking water Fluorophotometric method

ICS
13.060.45
CCS
D4610
发布
2023-12-05
实施
2023-12-05

Water quality — Sampling for microbiological analysis

ICS
13.060.45
CCS
发布
2023-11-30
实施

Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode

ICS
13.060.45
CCS
发布
2023-11-01
实施

Water quality — Sampling — Part 22: Guidance on the design and installation of groundwater monitoring points

ICS
13.060.45
CCS
发布
2023-11-01
实施

Water quality — Sampling — Part 3: Preservation and handling of water samples

ICS
13.060.45
CCS
发布
2023-09
实施

Water quality — Sampling — Part 27: Guidance on sampling for microplastics in water

ICS
13.060.45
CCS
发布
2023-08
实施

Water quality — Sampling — Part 1: Guidance on the design of sampling programmes and sampling techniques

ICS
13.060.45
CCS
发布
2023-07-14
实施

Water quality — Guidance and requirements for designing an interlaboratory trial for validation of analytical methods

ICS
13.060.45
CCS
发布
2023-07
实施
2023-07

Water quality — Analysis of plastics in water — Part 3: Thermo-analytical methods for waters with low content of natural suspended solids

ICS
13.060.45
CCS
发布
2023-05
实施

Water quality — Analysis of plastics in water — Part 2: Method using vibrational spectroscopy

ICS
13.060.45
CCS
发布
2023-05
实施

Water quality — Sampling — Part 27: Sampling for microplastic particles and fibres in water

ICS
13.060.45
CCS
发布
2023-05
实施

Water quality — Sampling — Part 3: Preservation and handling of water samples

ICS
13.060.45
CCS
发布
2023-05
实施

Water quality — Guidance and requirements for designing an interlaboratory trial for validation of analytical methods

ICS
13.060.45
CCS
发布
2023-05
实施

1   Scope This document specifies general requirements, performance requirements and conformity test procedures for automatic sampling devices (samplers) for water and waste water that: — sample water and waste water from non-pressurized (i.e. open to atmosphere) channels or vessels; — sample over extended periods to collect discrete or composite samples based on time, event or flow proportional sampling. It does not include sampling systems built into online and in-line analysers. The general requirements include functional facilities that samplers need to meet users’ applications and information that needs to be included in associated documents. The test procedures specify uniform methods to be used when determining key performance characteristics of samplers at one or more set sample volume. It is for the sampler manufacturer and/or user to decide on the required set sample volume(s). All of the test procedures are to be carried out under laboratory conditions. It is recognized that for some samplers, certain test procedures are not applicable. Statistical procedures are specified for evaluation of the test data. Some example calculations are provided. Specific sample integrity requirements are specified for samplers to be used for the collection of samples of final effluent or influent for the purpose of monitoring the performance of urban waste w...

Water quality. Performance requirements and conformity test procedures for water monitoring equipment. Automatic sampling devices (samplers) for water and waste water

ICS
13.060.45
CCS
发布
2023-04-30
实施
2023-04-30

1   Scope This document specifies general requirements and performance test procedures for portable and fixed position continuous measuring devices that are used in an in-line or online operating position to measure physical and chemical measurands in water. It excludes chemical test kits and laboratory analysers. The general requirements include functional facilities that CMDs need to meet users’ applications and information that needs to be included in associated documents. The test procedures specify uniform methods to be used when determining key performance characteristics of CMDs . The performance tests comprise testing carried out under laboratory and field conditions. It is recognized that for some devices certain test procedures are not applicable. Statistical procedures are defined for evaluation of the test data. Example values for performance characteristics for a selection of CMDs for monitoring waste water effluents and receiving waters are detailed in Annex A for guidance. This document requires the manufacturer of a CMD to provide more technical data for verification than does EN ISO 15839:2006 [7]. Consequently, EN ISO 15839 [7] will be of greater assistance to manufacturers wishing to characterize a new device whereas this document is more focussed on user requirements for the verification of manufacturer’s claims.

Water quality. General requirements and performance test procedures for water monitoring equipment. Measuring devices

ICS
13.060.45
CCS
发布
2023-04-30
实施
2023-04-30

1   Scope This document sets out the general principles for, and provides guidance on, the design of sampling programmes and sampling techniques for all aspects of sampling of water (including waste waters, sludges, effluents, suspended solids and sediments). This document does not include detailed instructions for specific sampling situations, which are covered in various other parts of the ISO 5667 series and in ISO 19458.

Water quality. Sampling. Guidance on the design of sampling programmes and sampling techniques

ICS
13.060.45
CCS
发布
2023-04-30
实施
2023-04-30

This document sets out the general principles for, and provides guidance on, the design of sampling programmes and sampling techniques for all aspects of sampling of water (including waste waters, sludges, effluents, suspended solids and sediments). This document does not include detailed instructions for specific sampling situations, which are covered in various other parts of the ISO 5667 series and in ISO 19458.

Water quality - Sampling - Part 1: Guidance on the design of sampling programmes and sampling techniques (ISO 5667-1:2023)

ICS
13.060.45
CCS
发布
2023-04-05
实施
2023-07-31

This European Standard specifies general requirements and performance test procedures for portable and fixed position measuring devices (MDs) that are used in an in-line or online operating position to measure physical and chemical determinands in water. It excludes at-line devices, such as chemical test kits, and off-line devices, such as laboratory analysers. The general requirements include functional facilities that MDs need to meet users’ applications and information that need to be included in associated documents. The test procedures specify uniform methods to be used when determining key performance characteristics of MDs. The performance tests comprise testing carried out under laboratory and field conditions. Statistical procedures are defined for evaluation of the test data. It is recognized that for some devices certain test procedures are not applicable. Example values for performance characteristics for a selection of MDs for monitoring waste water effluents and receiving waters are detailed in Annex A for guidance. This European Standard requires the manufacturer of a MD to provide more technical data for verification than does EN ISO 15839:2006 [5]. Consequently, EN ISO 15839 will be of greater assistance to manufacturers wishing to characterize a new device whereas this European Standard is more focussed on user requirements for the verification of manufacturer’s claims.

Water quality - General requirements and performance test procedures for water monitoring equipment - Continuous measuring devices

ICS
13.060.45
CCS
发布
2023-04-05
实施
2023-07-31



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号