23.020.01;23.040.99;29.260.20 标准查询与下载

GB/T 30040.7-2013 双层罐渗漏检测系统 第7部分:双层间隙、防渗漏衬里及防渗漏外套的一般要求和试验方法

GB/T 30040的本部分规定了双层间隙、防渗漏衬里和防渗漏外套的材料、双层间隙的型式试验、防渗漏衬里和防渗漏外套的一般要求和试验方法。本部分适用于双层罐渗漏检测系统的双层间隙、防渗漏衬里和防渗漏外套。

Leak detection systems.Part 7:General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jacket

GB/T 30040.2-2013 双层罐渗漏检测系统 第2部分:压力和真空系统

GB/T 30040的本部分规定了储存对水有污染的液体的双层系统的I级渗漏检测系统的概述、双层间隙、真空和压力检漏器、试验、防渗漏衬里、防渗漏外套和标志。本部分适用于储存对水有污染的液体的双层系统的I级渗漏检测系统。

Leak detection systems.Part 2:Pressure and vacuum systems

GB/T 30040.6-2013 双层罐渗漏检测系统 第6部分:监测井用传感器显示系统

GB/T 30040的本部分规定了用于设计存放易燃、但闪点不超过100℃的燃料系统的V级渗漏检测系统的概述、监测井、液体识别传感器、蒸气传感器和渗漏指示装置。本部分适用于设计存放易燃、但闪点不超过100 ℃的燃料系统的V级渗漏检测系统。

Leak detection systems.Part 6 : Sensors in monitoring wells

GB/T 30040.1-2013 双层罐渗漏检测系统 第1部分:通则

GB/T30040.1—2013 双层罐渗漏检测系统第1 部分:通则GB/T30040 的本部分规定「储存对水有污染的液体的双层罐、单层罐、管道的渗漏检测系统的分级、要求、标志和合格评估体系。 本部分适用子储存对水有污染的液体的双层罐、羊层罐、管道的渗漏检测系统a

Leak detection systems.Part 1:General principles

GB/T 30040.4-2013 双层罐渗漏检测系统 第4部分:应用于防渗漏设施或双层间隙的液体或蒸气传感器系统

GB/T 30040的本部分规定了储存对水有污染的液体的双层系统的双层间隙或单层系统的防渗漏设施的III级渗漏检测系统的概述、双层间隙、防渗漏设施、液体传感器、蒸气传感器、渗漏显示装置、液体传感器的型式试验、液体识别传感器的型式试验、蒸气传感器的型式试验和浸没型蒸气传感器的型式试验。本部分适用于储存对水有污染的液体的双层系统的双层间隙或单层系统防渗漏设施的III级渗漏检测系统,不适用于应用不能重复使用的传感器的渗漏监测系统。

Leak detection systems.Part 4:Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces

DIN EN 13160-7:2016 检漏系统.第7部分:填隙空间、泄漏防护衬和泄漏防护套的要求和试验/评估方法.德文版本EN 13160-7-2016

Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets; German version EN 13160-7:2016

DIN EN 13160-1:2016 检漏系统.第1部分:一般原理.德文版本EN 13160-1-2016

Leak detection systems - Part 1: General Principles; German version EN 13160-1:2016

DIN EN 13160-6:2016 检漏系统.第6部分:监测井中传感器.德文版本EN 13160-6-2016

Leak detection systems - Part 6: Sensors in monitoring wells; German version EN 13160-6:2016

DIN EN 13160-4:2016 检漏系统.第4部分:基于传感器的检漏系统的要求和试验/评估方法.德文版本EN 13160-4-2016

Leak detection systems - Part 4: Requirements and test/assessment methods for sensor based leak detection systems; German version EN 13160-4:2016

DIN EN 13160-2:2016 检漏系统.第2部分:压力和真空系统的要求和试验/评估方法.德文版本EN 13160-2-2016

Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems; German version EN 13160-2:2016

BS EN 13160-7:2016 泄漏检测系统 间隙空间、检漏衬里和检漏护套的要求和测试/评估方法

Leak detection systems. Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets

BS EN 13160-1:2016 泄漏检测系统 一般原则

Leak detection systems. General Principles

BS EN 13160-4:2016 泄漏检测系统 基于传感器的泄漏检测系统的要求和测试/评估方法

Leak detection systems. Requirements and test/assessment methods for sensor based leak detection systems

BS EN 13160-6:2016 检漏系统.监测井中传感器

Leak detection systems. Sensors in monitoring wells

EN 13160-4:2016 检漏系统-第4部分:基于传感器的泄漏检测系统的要求和测试/评估方法

This European Standard gives requirements and the corresponding test/assessment methods applicable to sensor based leak detection systems (leak detection kits). The leak detection kits are intended to be used in interstitial spaces, leakage containments or monitoring wells. The leak detection kits are usually composed by: - sensing device(s); - evaluation device; - alarm device.

Leak detection systems - Part 4: Requirements and test/assessment methods for sensor based leak detection systems

EN 13160-6:2016 检漏系统-第6部分:监测井中传感器

This European Standard specifies the requirements for leak detection systems - class V for use with systems designed for fuels that are flammable, having a flash point up to but not exceeding 100 °C.

Leak detection systems - Part 6: Sensors in monitoring wells

EN 13160-2:2016 泄漏检测系统-第2部分:压力和真空系统的要求和测试/评估方法

This European Standard gives requirements and the corresponding test/assessment methods applicable to leak detection kits (leak detector) based on the measurement of pressure change. Leak detection kits are intended to be used with double skin, underground or above ground, pressurized or non-pressurized, tanks or pipework designed for water polluting liquids/fluids. The kits are usually composed of: - measuring device; - evaluation device; - alarm device; - pressure generator; - pressure relief device; - liquid stop device; - condensate trap.

Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems

EN 13160-7:2016 检漏系统-第7部分:填隙空间,检漏衬里和检漏夹克的要求和试验/评定方法

This European Standard gives requirements and the corresponding test/assessment methods applicable to leak detection lining kits and leak detection jacket kits. Leak detection lining kits and leak detection jackets kits intended to be used to create an interstitial space or leakage containment in single skin underground or above ground, non-pressurized, tanks designed for water polluting liquids. The kit has to be used only in conjunction with leak detection kits covered by EN 13160-2 to EN 13160-4.

Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces@ leak detection linings and leak detection jackets

EN 13160-1:2016 检漏系统-第1部分:一般原则

This European Standard specifies the general principles for leak detection systems for use with double-skin, single-skin, underground or above ground tanks and pipework designed for water polluting fluids.

Leak detection systems - Part 1: General Principles

LST EN 13160-4-2004 泄漏检测系统 第4部分：用于泄漏容器或间隙空间的液体和/或蒸汽传感器系统

Leak detection systems - Part 4: Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces