23.020.20 车载槽罐和容器 标准查询与下载
共找到 51 条与 车载槽罐和容器 相关的标准，共 4 页
前言 II 1 范围 1 2 规范性引用文件 1 3 术语和定义 1 4 服务提供者 2 5 服务保障 2 5.1 人员要求 2 5.2 设施设备要求 2 5.3 技术和工艺要求 2 5.4 信息化要求 2 6 作业要求 2 6.1 服务订单确认 2 6.2 作业前检查 3 6.3 搬运 3 6.4 泄压及排液 3 6.5 置换 3 6.6 罐箱清洗 3 6.7 附件的拆除、清洗与安装 4 6.8 检修 4 6.9 检查 4 6.10 交付 4 7 作业环境与职业健康管理 5 7.1 废气废水处理 5 7.2 废弃物贮存 5 7.3 噪声控制 5 7.4 职业病防护 5 7.5 个人防护 5 8 安全与应急管理 5 9 投诉处理 5 附录A（资料性）待清洁罐式集装箱交接检查表样式 6 参考文献 8
Cleaning service requirements for tanks of tank container
- ICS
- 23.020.20
- CCS
- G544
- 发布
- 2023-12-18
- 实施
- 2024-01-15
This document covers the manhole cover assembly and specifies the performance requirements, dimensions and tests necessary to verify the compliance of the equipment to this standard. The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR - European Agreement concerning the International Carriage of Dangerous Goods by Road which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no sub-classification as toxic or corrosive.
Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly
- ICS
- 23.020.20
- CCS
- 发布
- 2023-05-03
- 实施
This European Standard is applicable to the cap used to provide protection and end closing for the adaptor for bottom loading and unloading of tanks for the transport of dangerous goods. It specifies the performance requirements, critical dimensions and tests necessary to verify the compliance of the equipment with this European Standard. The equipment specified by this European Standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR ) (flammable liquids) that have a vapour pressure not exceeding 110 kPa at 50 °C, including petrol, and that are not sub-classified as toxic or corrosive.
Tanks for the transport of dangerous goods - Service equipment - Cap for the adaptor for bottom loading and unloading
- ICS
- 23.020.20
- CCS
- 发布
- 2023-05-03
- 实施
1.1 This guide is intended to identify and define the minimum requirements for the best practices in the design, installation, and application of Type C portable tanks in marine liquefied natural gas (LNG) fuel tank service used on LNGfueled vessels. 1.2 This guide comprises the necessary guidance for regulatory compliance in addition to the requirements of the IMO IGF Code, along with the risk assessment considerations to detail the criteria for design, location, configuration, associated safety systems, and periodic system inspections. Included in the safety systems criteria would be leakage/spill detection and containment, water spray protection, emergency shutdown, grounding requirements, pressure relief to a fixed venting system, associated alarms, and color code markings for system identification. The locating and securing of suitable tank types with associated systems for marine service that will ensure compliant vessel stability with appropriate access to critical systems and connections for emergency response and vessel egress will also be addressed in this guide. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Guide for Installation and Application of Type C Portable Tanks for Marine LNG Service
- ICS
- 23.020.20
- CCS
- 发布
- 2023-05-01
- 实施
主要技术内容：本标准规定了仅限公路运输的钢质内胆纤维环缠绕管束式集装箱的材料、设计、制造、试验方法、检验规则、标志标识等方面的要求，用于指导钢质内胆纤维环缠绕管束式集装箱的设计和制造
Steel liner fiber ring wound tube bundle container
- ICS
- 23.020.20
- CCS
- C333
- 发布
- 2023-04-06
- 实施
- 2023-04-06
本标准规定了仅限公路运输的铝内胆碳纤维全缠绕瓶式集装箱的材料、设计、制造、试验方法、检验规则、标志标识等方面的专项技术要求，用于指导铝内胆碳纤维全缠绕瓶式集装箱的设计和制造。
Special technical requirements for compressed hydrogen aluminum liner carbon fiber full winding bottle container
- ICS
- 23.020.20
- CCS
- C333
- 发布
- 2023-02-18
- 实施
- 2023-03-06
本文件规定了医用氧气瓶（以下简称钢瓶）的型式和参数、基本要求、技术要求、试验方法、检验规则、标志、涂敷、包装、运输、储存、质量承诺等。 本文件适用于设计、制造公称工作压力不大于20 MPa，公称水容积为（0.5～150） L，使用环境温度为-20 ℃（正火处理的钢瓶）或-40 ℃（淬火后回火处理的钢瓶）～60 ℃，用于盛装医用氧气的可重复充装的移动式钢瓶。
Medical oxygen gas cylinders
- ICS
- 23.020.20
- CCS
- C333
- 发布
- 2022-12-08
- 实施
- 2023-04-06
1.相关术语。重点说明本规范的范围、规范性文件引用及相关术语界定。 2.主要检验内容。 1、定期检验前，使用单位应做好下列各项的准备工作 2、2.1检验的一般程序包括检验前准备、罐体检验、缺陷及问题处理、检验结果汇总、检验结论和出具检验报告等常规要求，检验人员可以根据实际情况，确定检验项目，进行检验工作。 2.2检验项目 2.3资料审查 2.4外观检查 2.5结构检查 3、无损检测 4、整体压力(渗漏)试验 5、检验结论
Inspection rules for atmospheric pressure metal tank of road tank-vehicle for liquid dangerous goods transport
- ICS
- 23.020.20
- CCS
- G543
- 发布
- 2022-07-18
- 实施
- 2022-08-31
本文件规定了二氧化碳、氮气及氩气等惰性气体的微型气瓶的技术要求，以及微型气瓶的外包装材质、包装方式、包装标志及运输方面的要求。 本文件适用于二氧化碳、氮气及氩气等惰性气体微型气瓶的包装及运输，快递中的微型气瓶的包装及运输。
The packing technical requirements for road transportation of mini-cylinders
- ICS
- 23.020.20
- CCS
- C333
- 发布
- 2020-12-30
- 实施
- 2021-01-11
Tanks for the transport of dangerous goods -- Metallic gravity-discharge tanks -- Design and construction
- ICS
- 23.020.20
- CCS
- 发布
- 2020-12-23
- 实施
- 2020-12-23
Rules for periodic inspection of non-metallic tanks of tank vehicles for road transport of liquid dangerous goods
- ICS
- 23.020.20
- CCS
- J 74
- 发布
- 2020-06-22
- 实施
- 2020-07-22
Regulations for Periodic Inspection of Cryogenic Liquid Vehicle Tank Cars
- ICS
- 23.020.20
- CCS
- J 74
- 发布
- 2019-02-13
- 实施
- 2019-05-13
Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve
- ICS
- 23.020.20
- CCS
- 发布
- 2018-08-01
- 实施
Gas cylinder barcode identification
- ICS
- 23.020.20
- CCS
- J 74
- 发布
- 2018-07-30
- 实施
- 2018-10-30
Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction
- ICS
- 23.020.20
- CCS
- 发布
- 2018-07-01
- 实施
Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly
- ICS
- 23.020.20
- CCS
- 发布
- 2018-07-01
- 实施
Tanks for transport of dangerous goods - Testing@ inspection and marking of metallic tanks
- ICS
- 23.020.20
- CCS
- 发布
- 2018-07-01
- 实施
1.1 This guide is intended to identify and define the minimum requirements for the best practices in the design, installation, and application of Type C portable tanks in marine liquefied natural gas (LNG) fuel tank service used on LNGfueled vessels. 1.2 This guide comprises the necessary guidance for regulatory compliance in addition to the requirements of the IMO IGF Code, along with the risk assessment considerations to detail the criteria for design, location, configuration, associated safety systems, and periodic system inspections. Included in the safety systems criteria would be leakage/spill detection and containment, water spray protection, emergency shutdown, grounding requirements, pressure relief to a fixed venting system, associated alarms, and color code markings for system identification. The locating and securing of suitable tank types with associated systems for marine service that will ensure compliant vessel stability with appropriate access to critical systems and connections for emergency response and vessel egress will also be addressed in this guide. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Guide for Installation and Application of Type C Portable Tanks for Marine LNG Service
- ICS
- 23.020.20
- CCS
- 发布
- 2018-05-15
- 实施
Safety management specification for portable pressure vessels
- ICS
- 23.020.20
- CCS
- R 01
- 发布
- 2016-05-31
- 实施
- 2016-07-01
Tanks for the transport of dangerous goods - Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage; German version EN 15207:2014
- ICS
- 23.020.20
- CCS
- A82;K30
- 发布
- 2015-03
- 实施
