23.040.01;75.200 标准查询与下载
共找到 39 条与 相关的标准，共 3 页
This document gives guidelines for the design of GRP piping systems. The requirements and recommendations apply to layout dimensions, hydraulic design, structural design, detailing, fire endurance, spread of fire and emissions and control of electrostatic discharge. This document is intended to be read in conjunction with ISO 14692-1.
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2017); English version EN ISO 14692-3:2017
- ICS
- 23.040.01;75.200
- CCS
- E98
- 发布
- 2018-02-01
- 实施
This document gives requirements and recommendations for the fabrication, installation, inspection and maintenance of GRP piping systems for use in oil and natural gas industry processing and utility service applications. The recommendations apply to delivery, inspection, handling, storage, installation, system pressure testing, maintenance and repair. It is intended to be read in conjunction with ISO 14692-1.
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2017); English version EN ISO 14692-4:2017
- ICS
- 23.040.01;75.200
- CCS
- E98
- 发布
- 2018-02-00
- 实施
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 4: Valves (ISO 16486-4:2016)
- ICS
- 23.040.01;75.200
- CCS
- J16
- 发布
- 2016-11
- 实施
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 2: Pipes (ISO 16486-2:2012 + AMD 1:2014)
- ICS
- 23.040.01;75.200
- CCS
- Q82
- 发布
- 2015-07
- 实施
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 5: Fitness for purpose of the system (ISO 16486-5:2012)
- ICS
- 23.040.01;75.200
- CCS
- Q82
- 发布
- 2015-07
- 实施
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 6: Code of practice for design, handling and installation (ISO 16486-6:2012)
- ICS
- 23.040.01;75.200
- CCS
- Q82
- 发布
- 2015-07
- 实施
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 3: Fittings (ISO 16486-3:2012 + AMD 1:2014)
- ICS
- 23.040.01;75.200
- CCS
- Q82
- 发布
- 2015-07
- 实施
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 1: General (ISO 16486-1:2012 + AMD 1:2014)
- ICS
- 23.040.01;75.200
- CCS
- Q82
- 发布
- 2015-07
- 实施
Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements; German version EN 1594:2013
- ICS
- 23.040.01;75.200
- CCS
- Q83
- 发布
- 2013-12
- 实施
This European Standard is applicable to pipelines with a maximum operating pressure (MOP) over 16 bar for the carriage of processed, non-toxic and non-corrosive natural gas according to EN ISO 13686 in onland gas infrastructure. This European Standard is
Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
- ICS
- 23.040.01;75.200
- CCS
- 发布
- 2013-10-18
- 实施
- 2013-10-18
Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements
- ICS
- 23.040.01;75.200
- CCS
- H48
- 发布
- 2013-09-30
- 实施
- 2013-09-30
This European Standard is applicable to pipelines with a maximum operating pressure (MOP) over 16 bar for the carriage of processed, non-toxic and non-corrosive natural gas according to EN ISO 13686 in onland gas infrastructure. This European Standard is also applicable to pipelines with a maximum operating pressure (MOP) over 16 bar for the carriage of non-conventional gases such as injected biomethane, complying with EN ISO 13686 and for which a detailed technical evaluation of the functional requirements is performed ensuring there are no other constituents or properties of the gases that can affect the integrity of the pipeline. Onland gas infrastructure is where:- pipeline elements are made of unalloyed or low-alloyed carbon steel; - pipeline elements are joined by welds, flanges or mechanical couplings; - the pipeline is not located within commercial or industrial premises as an integral part of the industrial process on these premises except for any pipelines and facilities supplying such premises; - the design temperature of the system is between -40 °C and 120 °C inclusive. This European Standard applies to onshore pipeline systems from the point where the pipeline first crosses what is normally accepted as battery limit between on and offshore, e. g.; - first isolation valve; - the base of steep sea shelf; - above the high water/low water mark onto mainland; - an island. This European Standard also applies to a pipeline system with a starting point onshore, also when parts of the pipeline system on the mainland subsequently cross fjords, lakes etc. This European Standard does not apply to existing pipelines, in use prior to the publication of this European Standard, nor to modifications to existing pipelines. Gas infrastructures covered by this European Standard begin after the gas producer's metering station. The functional demarcation of the pipeline system within a plant area will be determined from case to case. Generally speaking, this will be directl
Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
- ICS
- 23.040.01;75.200
- CCS
- 发布
- 2013-09-01
- 实施
This International Standard specifies requirements and gives recommendations for the design, materials, construction, testing, operation, maintenance and abandonment of pipeline systems used for transportation in the petroleum and natural gas industries. It applies to pipeline systems on land and offshore, connecting wells, production plants, process plants, refineries and storage facilities, including any section of a pipeline constructed within the boundaries of such facilities for the purpose of its connection. The extent of pipeline systems covered by this International Standard is illustrated in Figure 1. This International Standard applies to rigid, metallic pipelines. It is not applicable for flexible pipelines or those constructed from other materials, such as glass-reinforced plastics. This International Standard is applicable to all new pipeline systems and can be applied to modifications made to existing ones. It is not intended that it apply retroactively to existing pipeline systems. It describes the functional requirements of pipeline systems and provides a basis for their safe design, construction, testing, operation, maintenance and abandonment. On-land supply systems used by the gas supply industry excluding gas infrastructure from the input of gas into the on-shore transmission network up to the inlet connection of gas appliances are excluded from the scope of this standard.
Petroleum and natural gas industries. Pipeline transportation systems
- ICS
- 23.040.01;75.200
- CCS
- E98
- 发布
- 2011-09-30
- 实施
- 2011-09-30
This International Standard specifies requirements and gives recommendations for the design, materials, construction, testing, operation, maintenance and abandonment of pipeline systems used for transportation in the petroleum and natural gas industries. It applies to pipeline systems on land and offshore, connecting wells, production plants, process plants, refineries and storage facilities, including any section of a pipeline constructed within the boundaries of such facilities for the purpose of its connection. The extent of pipeline systems covered byThis International Standard is illustrated in Figure 1.This International Standard applies to rigid, metallic pipelines. It is not applicable for flexible pipelines or those constructed from other materials, such as glass-reinforced plastics.This International Standard is applicable to all new pipeline systems and can be applied to modifications made to existing ones. It is not intended that it apply retroactively to existing pipeline systems. It describes the functional requirements of pipeline systems and provides a basis for their safe design, construction, testing, operation, maintenance and abandonment. On-land supply systems used by the gas supply industry excluding gas infrastructure from the input of gas into the on-shore transmission network up to the inlet connection of gas appliances are excluded from the scope of this standard.
Petroleum and natural gas industries - Pipeline transportation systems (Incorporates Amendment A1: 2015)
- ICS
- 23.040.01;75.200
- CCS
- 发布
- 2011-07-01
- 实施
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2002); English version EN ISO 14692-4:2002, Corrigendum to DIN EN ISO 14692-4:2005-07; English version EN ISO 1469
- ICS
- 23.040.01;75.200
- CCS
- E98
- 发布
- 2010-09
- 实施
This European Standard is applicable to pipelines with a maximum operating pressure (MOP) over 16 bar for the carriage of processed, non-toxic and non-corrosive natural gas according to EN ISO 13686 in onland gas supply systems, where: -- pipeline elements are made of unalloyed or low-alloyed carbon steel; -- pipeline elements are joined by welds, flanges or mechanical couplings; -- the pipeline is not located within commercial or industrial premises as an integral part of the industrial process on these premises except for any pipelines and facilities supplying such premises; -- the design temperature of the system is between -40 ~C and 120 ~C inclusive. The standard applies to onshore pipeline systems from the point where the pipeline first crosses what is normally accepted as battery limit between on and offshore, e.g.: -- first isolation valve; -- the base of steep sea shelf; -- above the high water/low water mark onto mainland; -- an island. The pipeline standard also applies to a pipeline system with a starting point onshore, also when parts of the pipeline system on the mainland subsequently cross fjords, lakes etc. This European Standard does not apply to existing pipelines, in use prior to the publication of this European Standard, nor to modifications to existing pipelines. Gas supply systems covered by this European Standard begin after the gas producer's metering station. The functional demarcation of the pipeline system within a plant area will be determined from case to case. Generally speaking, this will be directly after the first isolating valve of the installation. This standard also describes the mechanical requirements for pipework in stations with a maximum operating pressure greater than 16 bar. Welding requirements are described in a special application standard on welding for gas supply systems EN 12732. Functional requirements for stations are given in: EN 1776, Gas supply systems - Natural gas measuring stations - Functional requirements EN 1918-5, Gas supply systems - Underground gas storage - Part 5: Functional recommendations for surface facilities EN 12186, Gas supply systems - Gas pressure regulating stations for transmission and distribution - Functional requirements EN 12583, Gas supply systems - Compressor stations - Functional requirements This European Standard specifies common basic principles for gas supply systems. Users of this European Standard should be aware that there may exist more detailed national standards and codes of practice in the CEN member countries. This European Standard is intended to be applied in association with these national standards and/or codes of practice setting out the above mentioned principles. In the event of conflicts in terms of more restrictive requirements in the national legislation/regulation with the requirements of this European Standard, the national legislation/regulation shall take precedence. Reference is made in this European Standard to relevant European and other recognized standards for products used to construct and operate gas supply systems. A schematic representation of pipelines for gas transmission is given in Figure 1.
Gas supply systems - Pipelines for maximum operating pressure over 16 bar - Functional requirements; English version of DIN EN 1594:2009-06
- ICS
- 23.040.01;75.200
- CCS
- Q82
- 发布
- 2009-06
- 实施
This International Standard specifies requirements and provides recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for application in pipeline systems meeting the requirements of ISO 13623 for the petroleum and natural gas industries. This International Standard is not applicable to subsea pipeline valves, as they are covered by a separate International Standard (ISO 14723). This International Standard is not applicable to valves for pressure ratings exceeding PN 420 (Class 2 500). On-land supply systems used by the gas supply industry are excluded from the scope of this standard.
Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:2007 modified + Cor 1:2009); English version EN 13942:2009 + AC:2009
- ICS
- 23.040.01;75.200
- CCS
- E98
- 发布
- 2009-06
- 实施
Gas supply systems - Pipelines for maximum operating pressure over 16 bar - Functional requirements.
- ICS
- 23.040.01;75.200
- CCS
- Q82
- 发布
- 2009-05-01
- 实施
- 2009-05-15
This European Standard is applicable to pipelines with a maximum operating pressure (MOP) over 16 bar for the carriage of processed, non-toxic and non-corrosive natural gas according to EN ISO 13686 in onland gas supply systems, where: ? pipeline elements are made of unalloyed or low-alloyed carbon steel; ? pipeline elements are joined by welds, flanges or mechanical couplings; ? the pipeline is not located within commercial or industrial premises as an integral part of the industrial process on these premises except for any pipelines and facilities supplying such premises; ? the design temperature of the system is between -40 °C and 120 °C inclusive. The standard applies to onshore pipeline systems from the point where the pipeline first crosses what is normally accepted as battery limit between on and offshore, e.g.: ? first isolation valve; ? the base of steep sea shelf; ? above the high water/low water mark onto mainland; ? an island.
Gas supply systems. Pipelines for maximum operating pressure over 16 bar. Functional requirements
- ICS
- 23.040.01;75.200
- CCS
- Q82
- 发布
- 2009-01-31
- 实施
- 2009-01-31
This European Standard is applicable to pipelines with a maximum operating pressure (MOP) over 16 bar forThe carriage of processed, non-toxic and non-corrosive natural gas according to EN ISO 13686 in onland gas supply systems, where:pipeline elements are made of unalloyed or low-alloyed carbon steel; pipeline elements are joined by welds, flanges or mechanical couplings;The pipeline is not located within commercial or industrial premises as an integral part of the industrial process onThese premises except for any pipelines and facilities supplying such premises;The design temperature of the system is between-40 ℃ and 120 ℃ inclusive.The standard applies to onshore pipeline systems fromThe point whereThe pipeline first crosses what is normally accepted as battery limit between on and offshore, e. g.:first isolation valve;The base of steep sea shelf; aboveThe high water/low water mark onto mainland; an island.The pipeline standard also applies to a pipeline system with a starting point onshore, also when parts of the pipeline system onThe mainland subsequently cross fjords, lakes etc.
Gas supply systems - Pipelines for maximum operating pressure over 16 bar - Functional requirements
- ICS
- 23.040.01;75.200
- CCS
- 发布
- 2009-01-01
- 实施
